SNOA475F October   2016  – September 2020 LMV791

 

  1.   Trademarks
  2. 1Introduction
  3. 2What Parameters Should Be Tested?
    1. 2.1  Open-Loop Gain (AOL) and Phase Margin
    2. 2.2  Slew Rate
    3. 2.3  Common-Mode Rejection Ratio (CMRR) and Power Supply Rejection Ratio (PSRR)
    4. 2.4  Open-Loop Output Impedance (Zo)
    5. 2.5  Voltage Noise (en)
    6. 2.6  Current Noise (in)
    7. 2.7  Input Offset Voltage (VOS), Input Bias Current (Ib), and Quiescent Current (IQ)
    8. 2.8  Output Voltage Versus Output Current (Claw Curve)
    9. 2.9  Overload Recovery Time (tOR)
    10. 2.10 Common-mode Input Capacitance (CCM) and Common-mode Differential Capacitance (CDIFF)
    11. 2.11 Overshoot and Transient Response
    12. 2.12 Common-Mode Voltage Range (CMVR)
  4. 3Conclusion
  5.   Revision History

Trademarks

TINA-TI™ are trademarks of Texas Instruments Incorporated.

PSpice® are registered trademarks of Texas Instruments Incorporated.

All other trademarks are the property of their respective owners.