6.1 Absolute Maximum Ratings(1)(2)
||Supply voltage (3)
||Voltage input (TXD)
|VCANH or VCANL
||Voltage at any bus terminal (CANH, CANL)
||Receiver output current
Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) This isolator is suitable for isolation within the safety limiting data. Maintenance of the safety data must be ensured by means of protective circuitry.
(3) All input and output logic voltage values are measured with respect to the GND1 logic side ground. Differential bus-side voltages are measured to the respective bus-side GND2 ground terminal.
(4) Maximum voltage must not exceed 6 V.