SLOS580G May   2008  – March 2015 ISO15 , ISO35

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Simplified Schematics
  5. Revision History
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Dissipation Ratings
    6. 7.6  Supply Current
    7. 7.7  Driver Electrical Characteristics
    8. 7.8  Receiver Electrical Characteristics
    9. 7.9  Driver Switching Characteristics
    10. 7.10 Receiver Switching Characteristics
    11. 7.11 Typical Characteristics
  8. Parameter Measurement Information
  9. Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagrams
    3. 9.3 Feature Description
      1. 9.3.1 Insulation and Safety-Related Package Characteristics
      2. 9.3.2 IEC 60664-1 Ratings Table
      3. 9.3.3 Regulatory Information
      4. 9.3.4 Safety-Limiting Values
    4. 9.4 Device Functional Modes
      1. 9.4.1 Device I/O Schematics
  10. 10Application and Implementation
    1. 10.1 Application Information
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
      3. 10.2.3 Application Curve
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Example
  13. 13Device and Documentation Support
    1. 13.1 Documentation Support
      1. 13.1.1 Related Documentation
    2. 13.2 Related Links
    3. 13.3 Trademarks
    4. 13.4 Electrostatic Discharge Caution
    5. 13.5 Glossary
  14. 14Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

5 Revision History

Changes from F Revision (January 2012) to G Revision

  • Added Pin Configuration and Functions section, ESD Rating table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section Go
  • Changed VDE standard to DIN V VDE V 0884-10 (VDE V 0884-10):2006-12. Go

Changes from E Revision (April 2010) to F Revision

  • Changed the FEATURES From: 4000-Vpeak 560-Vpeak VIORM per IEC....Rev 2) To: 4000-VPK VIOTM, 560-VPKVIORM, IEC 60747-5-2 (VDE 0884, Rev 2)Go
  • Changed Description From: The symmetrical isolation......interface. To; The symmetrical isolation barrier of the device is tested to provide isolatlion of 4000 VPK per VDE and 2500 VRMS per UL and CSA between ....interface.Go
  • Changed CTI From: ≥175 V To: ≥400 VGo
  • Changed the Regulatory Information TableGo

Changes from D Revision (March 2009) to E Revision

  • Added devices ISO15M and ISO35M to the data sheetGo
  • Changed Description - From: The ISO15 and ISO35 are qualified for use from –40°C to 85°C. To: The ISO15M and ISO35M have extended ambient temperature ratings of –55°C to 125°C while the ISO15 and ISO35 are specified over –40°C to 85°C.Go
  • Added Added Ambient Temp information in the RECOMMENDED OPERATING CONDITIONS tableGo
  • Added ISO15M and ISO35M to the Operating junction temperature in the RECOMMENDED OPERATING CONDITIONS tableGo
  • Changed the DRIVER ELECTRICAL table, IOZ High-impedance state output current - Test Condition VY or VZ = 12 V, VCC = 0 values From: TYP = -10 , MAX = - To: TYP = -, MAX = 90. Go
  • Changed the DRIVER ELECTRICAL table, IOZ High-impedance state output current - Test Condition VY or VZ = –7 V values From: TYP = -, MAX = 90 To: TYP = -10, MAX = - Go
  • Added IA or IB limits for the ISO15M ans ISO35M devicesGo
  • Added tr, tf limits for the ISO15M ans ISO35M devicesGo
  • Added pulse skew limits for the ISO15M ans ISO35M devicesGo
  • Added tr, tf for the ISO15M ans ISO35M devicesGo
  • Added the Driver output pins Note for Figure 3 through Figure 6Go
  • Changed the Driver output pins Note for Figure 7 through Figure 8Go

Changes from C Revision (December 2008) to D Revision

  • Changed Propagation delay values From: μs To: ns in the DRIVER SWITCHING tableGo

Changes from B Revision (July 2008) to C Revision

  • Added added IEC......ApprovedGo
  • Added added CSA information column back in tableGo

Changes from A Revision (June 2008) to B Revision

  • Changed From: 4000-Vpeak Isolation To: 4000-Vpeak Isolation, 560-Vpeak VIORM UL 1577, IEC 60747-5-2 (VDE 0884, Rev 2)Go
  • Changed Figure 15, Full-Duplex Common-Mode Transient Immunity Test CircuitGo

Changes from * Revision (May 2008) to A Revision

  • Changed L(101) Minimum air gap (Clearance) From 7.7mm To 8.34mm.Go
  • Changed From 40014131 To 40016131Go
  • Deleted CSA information from the Regulatory Information Table.Go