JAJSG94D November   2012  – September 2018 MSP430F67451 , MSP430F67461 , MSP430F67471 , MSP430F67481 , MSP430F67491 , MSP430F67651 , MSP430F67661 , MSP430F67671 , MSP430F67681 , MSP430F67691 , MSP430F67751 , MSP430F67761 , MSP430F67771 , MSP430F67781 , MSP430F67791

PRODUCTION DATA.  

  1. 1デバイスの概要
    1. 1.1 特長
    2. 1.2 アプリケーション
    3. 1.3 概要
    4. 1.4 アプリケーション図
  2. 2改訂履歴
  3. 3Device Comparison
    1. 3.1 Related Products
  4. 4Terminal Configuration and Functions
    1. 4.1 Pin Diagrams
    2. 4.2 Signal Descriptions
      1. Table 4-3 Terminal Functions – PEU Package
      2. Table 4-4 Terminal Functions – PZ Package
  5. 5Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Active Mode Supply Current Into VCC Excluding External Current
    5. 5.5  Low-Power Mode Supply Currents (Into VCC) Excluding External Current
    6. 5.6  Low-Power Mode With LCD Supply Currents (Into VCC) Excluding External Current
    7. 5.7  Thermal Packaging Characteristics
    8. 5.8  Schmitt-Trigger Inputs – General-Purpose I/O
    9. 5.9  Inputs – Ports P1 and P2
    10. 5.10 Leakage Current – General-Purpose I/O
    11. 5.11 Outputs – General-Purpose I/O (Full Drive Strength)
    12. 5.12 Outputs – General-Purpose I/O (Reduced Drive Strength)
    13. 5.13 Output Frequency – General-Purpose I/O
    14. 5.14 Typical Characteristics – Outputs, Reduced Drive Strength (PxDS.y = 0)
    15. 5.15 Typical Characteristics – Outputs, Full Drive Strength (PxDS.y = 1)
    16. 5.16 Crystal Oscillator, XT1, Low-Frequency Mode
    17. 5.17 Internal Very-Low-Power Low-Frequency Oscillator (VLO)
    18. 5.18 Internal Reference, Low-Frequency Oscillator (REFO)
    19. 5.19 DCO Frequency
    20. 5.20 PMM, Brownout Reset (BOR)
    21. 5.21 PMM, Core Voltage
    22. 5.22 PMM, SVS High Side
    23. 5.23 PMM, SVM High Side
    24. 5.24 PMM, SVS Low Side
    25. 5.25 PMM, SVM Low Side
    26. 5.26 Wake-up Times From Low-Power Modes and Reset
    27. 5.27 Auxiliary Supplies Recommended Operating Conditions
    28. 5.28 Auxiliary Supplies, AUXVCC3 (Backup Subsystem) Currents
    29. 5.29 Auxiliary Supplies, Auxiliary Supply Monitor
    30. 5.30 Auxiliary Supplies, Switch ON-Resistance
    31. 5.31 Auxiliary Supplies, Switching Time
    32. 5.32 Auxiliary Supplies, Switch Leakage
    33. 5.33 Auxiliary Supplies, Auxiliary Supplies to ADC10_A
    34. 5.34 Auxiliary Supplies, Charge Limiting Resistor
    35. 5.35 Timer_A
    36. 5.36 eUSCI (UART Mode) Clock Frequency
    37. 5.37 eUSCI (UART Mode)
    38. 5.38 eUSCI (SPI Master Mode) Clock Frequency
    39. 5.39 eUSCI (SPI Master Mode)
    40. 5.40 eUSCI (SPI Slave Mode)
    41. 5.41 eUSCI (I2C Mode)
    42. 5.42 Schmitt-Trigger Inputs, RTC Tamper Detect Pin
    43. 5.43 Inputs, RTC Tamper Detect Pin
    44. 5.44 Leakage Current, RTC Tamper Detect Pin
    45. 5.45 Outputs, RTC Tamper Detect Pin
    46. 5.46 LCD_C Recommended Operating Conditions
    47. 5.47 LCD_C Electrical Characteristics
    48. 5.48 SD24_B Power Supply and Recommended Operating Conditions
    49. 5.49 SD24_B Analog Input
    50. 5.50 SD24_B Supply Currents
    51. 5.51 SD24_B Performance
    52. 5.52 SD24_B, AC Performance
    53. 5.53 SD24_B, AC Performance
    54. 5.54 SD24_B, AC Performance
    55. 5.55 SD24_B External Reference Input
    56. 5.56 10-Bit ADC Power Supply and Input Range Conditions
    57. 5.57 10-Bit ADC Switching Characteristics
    58. 5.58 10-Bit ADC Linearity Parameters
    59. 5.59 10-Bit ADC External Reference
    60. 5.60 REF Built-In Reference
    61. 5.61 Comparator_B
    62. 5.62 Flash Memory
    63. 5.63 JTAG and Spy-Bi-Wire Interface
  6. 6Detailed Description
    1. 6.1  Functional Block Diagrams
    2. 6.2  CPU (Link to User's Guide)
    3. 6.3  Instruction Set
    4. 6.4  Operating Modes
    5. 6.5  Interrupt Vector Addresses
    6. 6.6  Special Function Registers (SFRs)
      1. Table 6-4 Interrupt Enable 1 Register Description
      2. Table 6-5 Interrupt Flag 1 Register Description
    7. 6.7  Memory Organization
    8. 6.8  Bootloader (BSL)
    9. 6.9  JTAG Operation
      1. 6.9.1 JTAG Standard Interface
      2. 6.9.2 Spy-Bi-Wire Interface
    10. 6.10 Flash Memory (Link to User's Guide)
    11. 6.11 RAM (Link to User's Guide)
    12. 6.12 Backup RAM (Link to User's Guide)
    13. 6.13 Peripherals
      1. 6.13.1  Oscillator and System Clock (Link to User's Guide)
      2. 6.13.2  Power-Management Module (PMM) (Link to User's Guide)
      3. 6.13.3  Auxiliary Supply System (Link to User's Guide)
      4. 6.13.4  Backup Subsystem
      5. 6.13.5  Digital I/O (Link to User's Guide)
      6. 6.13.6  Port Mapping Controller (Link to User's Guide)
      7. 6.13.7  System Module (SYS) (Link to User's Guide)
      8. 6.13.8  Watchdog Timer (WDT_A) (Link to User's Guide)
      9. 6.13.9  DMA Controller (Link to User's Guide)
      10. 6.13.10 CRC16 (Link to User's Guide)
      11. 6.13.11 Hardware Multiplier (Link to User's Guide)
      12. 6.13.12 Enhanced Universal Serial Communication Interface (eUSCI) (Links to User's Guide: UART Mode, SPI Mode, I2C Mode)
      13. 6.13.13 ADC10_A (Link to User's Guide)
      14. 6.13.14 SD24_B (Link to User's Guide)
      15. 6.13.15 TA0 (Link to User's Guide)
      16. 6.13.16 TA1 (Link to User's Guide)
      17. 6.13.17 TA2 (Link to User's Guide)
      18. 6.13.18 TA3 (Link to User's Guide)
      19. 6.13.19 SD24_B Triggers
      20. 6.13.20 ADC10_A Triggers
      21. 6.13.21 Real-Time Clock (RTC_C) (Link to User's Guide)
      22. 6.13.22 Reference Module (REF) Voltage Reference (Link to User's Guide)
      23. 6.13.23 LCD_C (Link to User's Guide)
      24. 6.13.24 Comparator_B (Link to User's Guide)
      25. 6.13.25 Embedded Emulation Module (EEM) (Link to User's Guide)
      26. 6.13.26 Peripheral File Map
    14. 6.14 Input/Output Diagrams
      1. 6.14.1  Port P1 (P1.0 to P1.3) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      2. 6.14.2  Port P1 (P1.0 to P1.3) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      3. 6.14.3  Port P1 (P1.4 and P1.5) Input/Output With Schmitt Trigger (MSP430F677xIPEU and MSP430F677xIPZ)
      4. 6.14.4  Port P1 (P1.6 and P1.7) Input/Output With Schmitt Trigger (MSP430F677xIPEU and MSP430F677xIPZ)
      5. 6.14.5  Port P2 (P2.0 to P2.7) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      6. 6.14.6  Port P2 (P2.0 to P2.3) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      7. 6.14.7  Port P2 (P2.4 and P2.6) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      8. 6.14.8  Port P2 (P2.7) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      9. 6.14.9  Ports P3 (P3.0 to P3.7) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      10. 6.14.10 Ports P3 (P3.0) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      11. 6.14.11 Ports P3 (P3.1 to P3.7) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      12. 6.14.12 Port P4 (P4.0 to P4.7) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      13. 6.14.13 Port P4 (P4.0 to P4.7) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      14. 6.14.14 Port P5 (P5.0 to P5.3) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      15. 6.14.15 Port P5 (P5.4 to P5.6) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      16. 6.14.16 Port P5 (P5.7) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      17. 6.14.17 Port P5 (P5.0 to P5.7) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      18. 6.14.18 Port P6 (P6.0) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      19. 6.14.19 Port P6 (P6.1 to P6.3) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      20. 6.14.20 Port P6 (P6.4 to P6.7) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      21. 6.14.21 Port P6 (P6.0 to P6.7) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      22. 6.14.22 Port P7 (P7.0 to P7.7) Input/Output With Schmitt Trigger (MSP430F67xxIPEU Only)
      23. 6.14.23 Port P7 (P7.0 to P7.7) Input/Output With Schmitt Trigger (MSP430F67xxIPZ Only)
      24. 6.14.24 Port P8 (P8.0 to P8.7) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      25. 6.14.25 Port P8 (P8.0) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      26. 6.14.26 Port P8 (P8.1) Input/Output With Schmitt Trigger (MSP430F677xIPZ Only)
      27. 6.14.27 Port P9 (P9.0 to P9.7) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      28. 6.14.28 Port P10 (P10.0 to P10.7) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      29. 6.14.29 Port P11 (P11.0) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      30. 6.14.30 Port P11 (P11.1) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      31. 6.14.31 Port P11 (P11.2 and P11.3) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      32. 6.14.32 Port P11 (P11.4 and P11.5) Input/Output With Schmitt Trigger (MSP430F677xIPEU Only)
      33. 6.14.33 Port PJ (PJ.0) JTAG Pin TDO, Input/Output With Schmitt Trigger or Output
      34. 6.14.34 Port PJ (PJ.1 to PJ.3) JTAG Pins TMS, TCK, TDI/TCLK, Input/Output With Schmitt Trigger or Output
    15. 6.15 Device Descriptors (TLV)
  7. 7デバイスおよびドキュメントのサポート
    1. 7.1  使い始めと次の手順
    2. 7.2  Device Nomenclature
    3. 7.3  ツールとソフトウェア
    4. 7.4  ドキュメントのサポート
    5. 7.5  関連リンク
    6. 7.6  Community Resources
    7. 7.7  商標
    8. 7.8  静電気放電に関する注意事項
    9. 7.9  Export Control Notice
    10. 7.10 Glossary
  8. 8メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

Port Mapping Controller (Link to User's Guide)

The port mapping controller allows flexible and reconfigurable mapping of digital functions to ports P2, P3, and P4 (see Table 6-11). Table 6-12 lists the default settings for all pins that support port mapping.

Table 6-11 Port Mapping Mnemonics and Functions

VALUE PxMAPy MNEMONIC INPUT PIN FUNCTION OUTPUT PIN FUNCTION
0 PM_NONE None DVSS
1 PM_UCA0RXD eUSCI_A0 UART RXD (direction controlled by eUSCI – Input)
PM_UCA0SOMI eUSCI_A0 SPI slave out master in (direction controlled by eUSCI)
2 PM_UCA0TXD eUSCI_A0 UART TXD (direction controlled by eUSCI – Output)
PM_UCA0SIMO eUSCI_A0 SPI slave in master out (direction controlled by eUSCI)
3 PM_UCA0CLK eUSCI_A0 clock input/output (direction controlled by eUSCI)
4 PM_UCA0STE eUSCI_A0 SPI slave transmit enable (direction controlled by eUSCI)
5 PM_UCA1RXD eUSCI_A1 UART RXD (direction controlled by eUSCI – Input)
PM_UCA1SOMI eUSCI_A1 SPI slave out master in (direction controlled by eUSCI)
6 PM_UCA1TXD eUSCI_A1 UART TXD (direction controlled by eUSCI – Output)
PM_UCA1SIMO eUSCI_A1 SPI slave in master out (direction controlled by eUSCI)
7 PM_UCA1CLK eUSCI_A1 clock input/output (direction controlled by eUSCI)
8 PM_UCA1STE eUSCI_A1 SPI slave transmit enable (direction controlled by eUSCI)
9 PM_UCA2RXD eUSCI_A2 UART RXD (direction controlled by eUSCI – Input)
PM_UCA2SOMI eUSCI_A2 SPI slave out master in (direction controlled by eUSCI)
10 PM_UCA2TXD eUSCI_A2 UART TXD (direction controlled by eUSCI – Output)
PM_ UCA2SIMO eUSCI_A2 SPI slave in master out (direction controlled by eUSCI)
11 PM_UCA2CLK eUSCI_A2 clock input/output (direction controlled by eUSCI)
12 PM_UCA2STE eUSCI_A2 SPI slave transmit enable (direction controlled by eUSCI)
13 PM_UCA3RXD eUSCI_A3 UART RXD (direction controlled by eUSCI – Input)
PM_UCA3SOMI eUSCI_A3 SPI slave out master in (direction controlled by eUSCI)
14 PM_UCA3TXD eUSCI_A3 UART TXD (direction controlled by eUSCI – Output)
PM_ UCA3SIMO eUSCI_A3 SPI slave in master out (direction controlled by eUSCI)
15 PM_UCA3CLK eUSCI_A3 clock input/output (direction controlled by eUSCI)
16 PM_UCA3STE eUSCI_A3 SPI slave transmit enable (direction controlled by eUSCI)
17 PM_UCB0SIMO eUSCI_B0 SPI slave in master out (direction controlled by eUSCI)
PM_UCB0SDA eUSCI_B0 I2C data (open drain and direction controlled by eUSCI)
18 PM_UCB0SOMI eUSCI_B0 SPI slave out master in (direction controlled by eUSCI)
PM_UCB0SCL eUSCI_B0 I2C clock (open drain and direction controlled by eUSCI)
19 PM_UCB0CLK eUSCI_B0 clock input/output (direction controlled by eUSCI)
20 PM_UCB0STE eUSCI_B0 SPI slave transmit enable (direction controlled by eUSCI)
21 PM_UCB1SIMO eUSCI_B1 SPI slave in master out (direction controlled by eUSCI)
PM_UCB1SDA eUSCI_B1 I2C data (open drain and direction controlled by eUSCI)
22 PM_UCB1SOMI eUSCI_B1 SPI slave out master in (direction controlled by eUSCI)
PM_UCB1SCL eUSCI_B1 I2C clock (open drain and direction controlled by eUSCI)
23 PM_UCB1CLK eUSCI_B1 clock input/output (direction controlled by eUSCI)
24 PM_UCB1STE eUSCI_B1 SPI slave transmit enable (direction controlled by eUSCI)
25 PM_TA0.0 TA0 CCR0 capture input CCI0A TA0 CCR0 compare output Out0
26 PM_TA0.1 TA0 CCR1 capture input CCI1A TA0 CCR1 compare output Out1
27 PM_TA0.2 TA0 CCR2 capture input CCI2A TA0 CCR2 compare output Out2
28 PM_TA1.0 TA1 CCR0 capture input CCI0A TA1 CCR0 compare output Out0
29 PM_TA2.0 TA2 CCR0 capture input CCI0A TA2 CCR0 compare output Out0
30 PM_TA3.0 TA3 CCR0 capture input CCI0A TA3 CCR0 compare output Out0
31(0FFh)(1) PM_ANALOG Disables the output driver and the input Schmitt trigger to prevent parasitic cross currents when applying analog signals.
The value of the PM_ANALOG mnemonic is set to 0FFh. The port mapping registers are only 5 bits wide and the upper bits are ignored, which results in a read value of 31.

Table 6-12 Default Port Mapping

PIN NAME PxMAPy MNEMONIC INPUT PIN FUNCTION OUTPUT PIN FUNCTION
PEU PZ
P2.0/PM_TA0.0 P2.0/PM_TA0.0/COM4 PM_TA0.0 TA0 CCR0 capture input CCI0A TA0 CCR0 compare output Out0
P2.1/PM_TA0.1 P2.1/PM_TA0.1/COM5 PM_TA0.1 TA0 CCR1 capture input CCI1A TA0 CCR1 compare output Out1
P2.2/PM_TA0.2 P2.2/PM_TA0.2/COM6 PM_TA0.2 TA0 CCR2 capture input CCI2A TA0 CCR2 compare output Out2
P2.3/PM_TA1.0 P2.3/PM_TA1.0/COM7 PM_TA1.0 TA1 CCR0 capture input CCI0A TA1 CCR0 compare output Out0
P2.4/PM_TA2.0 P1.1/PM_TA2.0/R23 PM_TA2.0 TA2 CCR0 capture input CCI0A TA2 CCR0 compare output Out0
P2.5/PM_UCB0SOMI/ PM_UCB0SCL P2.0/PM_UCB0SOMI/ PM_UCB0SCL/R13 PM_UCB0SOMI/ PM_UCB0SCL eUSCI_B0 SPI slave out master in (direction controlled by eUSCI),
eUSCI_B0 I2C clock (open drain and direction controlled by eUSCI)
P2.6/PM_UCB0SIMO/ PM_UCB0SDA P2.6/PM_UCB0SIMO/ PM_UCB0SDA/R03 PM_UCB0SIMO/ PM_UCB0SDA eUSCI_B0 SPI slave in master out (direction controlled by eUSCI),
eUSCI_B0 I2C data (open drain and direction controlled by eUSCI)
P2.7/PM_UCB0CLK P2.7/PM_UCB0CLK/CB2 PM_UCB0CLK eUSCI_B0 clock input/output (direction controlled by eUSCI)
P3.0/PM_UCA0RXD/ PM_UCA0SOMI P3.0/PM_UCA0RXD/ PM_UCA0SOMI PM_UCA0RXD/ PM_UCA0SOMI eUSCI_A0 UART RXD (direction controlled by eUSCI – input),
eUSCI_A0 SPI slave out master in (direction controlled by eUSCI)
P3.1/PM_UCA0TXD/ PM_UCA0SIMO P3.1/PM_UCA0TXD/ PM_UCA0SIMO/S39 PM_UCA0TXD/ PM_UCA0SIMO eUSCI_A0 UART TXD (direction controlled by eUSCI – output),
eUSCI_A0 SPI slave in master out (direction controlled by eUSCI)
P3.2/PM_UCA0CLK P3.2/PM_UCA0CLK/S38 PM_UCA0CLK eUSCI_A0 clock input/output (direction controlled by eUSCI)
P3.3/PM_UCA1CLK P3.3/PM_UCA1CLK/S37 PM_UCA1CLK eUSCI_A1 clock input/output (direction controlled by eUSCI)
P3.4/PM_UCA1RXD/ PM_UCA1SOMI/ P3.4/PM_UCA1RXD/ PM_UCA1SOMI/S36 PM_UCA1RXD/ PM_UCA1SOMI eUSCI_A1 UART RXD (direction controlled by eUSCI – input),
eUSCI_A1 SPI slave out master in (direction controlled by eUSCI)
P3.5/PM_UCA1TXD/ PM_UCA1SIMO P3.5/PM_UCA1TXD/ PM_UCA1SIMO/S35 PM_UCA1TXD/ PM_UCA1SIMO eUSCI_A1 UART TXD (direction controlled by eUSCI – output),
eUSCI_A1 SPI slave in master out (direction controlled by eUSCI)
P3.6/PM_UCA2RXD/ PM_UCA2SOMI/ P3.6/PM_UCA2RXD/ PM_UCA2SOMI/S34 PM_UCA2RXD/ PM_UCA2SOMI eUSCI_A2 UART RXD (direction controlled by eUSCI – input),
eUSCI_A2 SPI slave out master in (direction controlled by eUSCI)
P3.7/PM_UCA2TXD/ PM_UCA2SIMO P3.7/PM_UCA2TXD/ PM_UCA2SIMO/S33 PM_UCA2TXD/ PM_UCA2SIMO eUSCI_A2 UART TXD (direction controlled by eUSCI – output),
eUSCI_A2 SPI slave in master out (direction controlled by eUSCI)
P4.0/PM_UCA2CLK P4.0/PM_UCA2CLK/S32 PM_UCA2CLK eUSCI_A2 clock input/output (direction controlled by eUSCI)
P4.1/PM_UCA3RXD/ PM_UCA3SOMI/ P4.1/PM_UCA3RXD/ PM_UCA3SOMI/S31 PM_UCA3RXD/ PM_UCA3SOMI eUSCI_A3 UART RXD (direction controlled by eUSCI – input),
eUSCI_A3 SPI slave out master in (direction controlled by eUSCI)
P4.2/PM_UCA3TXD/ PM_UCA3SIMO P4.2/PM_UCA3TXD/ PM_UCA3SIMO/S30 PM_UCA3TXD/ PM_UCA3SIMO eUSCI_A3 UART TXD (direction controlled by eUSCI – output),
eUSCI_A3 SPI slave in master out (direction controlled by eUSCI)
P4.3/PM_UCA3CLK P4.3/PM_UCA3CLK/S29 PM_UCA3CLK eUSCI_A3 clock input/output (direction controlled by eUSCI)
P4.4/PM_UCB1SOMI/ PM_UCB1SCL P4.4/PM_UCB1SOMI/ PM_UCB1SCL/S28 PM_UCB1SOMI/ PM_UCB1SCL eUSCI_B1 SPI slave out master in (direction controlled by eUSCI),
eUSCI_B1 I2C clock (open drain and direction controlled by eUSCI)
P4.5/PM_UCB1SIMO/ PM_UCB1SDA P4.5/PM_UCB1SIMO/ PM_UCB1SDA/S27 PM_UCB1SIMO/ PM_UCB1SDA eUSCI_B1 SPI slave in master out (direction controlled by eUSCI),
eUSCI_B1 I2C data (open drain and direction controlled by eUSCI)
P4.6/PM_UCB1CLK P4.6/PM_UCB1CLK/S26 PM_UCB1CLK eUSCI_B1 clock input/output (direction controlled by eUSCI)
P4.7/PM_TA3.0 P4.7/PM_TA3.0/S25 PM_TA3.0 TA3 CCR0 capture input CCI0A TA3 CCR0 compare output Out0