JAJSC86B May   2016  – August 2016 REF6025 , REF6030 , REF6033 , REF6041 , REF6045 , REF6050

PRODUCTION DATA.  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
  4. 4 改訂履歴
  5. 5 Device Comparison Table
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Parameter Measurement Information
    1. 8.1 Solder Heat Shift
    2. 8.2 Thermal Hysteresis
    3. 8.3 Reference Droop Measurements
    4. 8.4 1/f Noise Performance
  9. 9 Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Integrated ADC Drive Buffer
      2. 9.3.2 Temperature Drift
      3. 9.3.3 Load Current
      4. 9.3.4 Stability
    4. 9.4 Device Functional Modes
  10. 10Applications and Implementation
    1. 10.1 Application Information
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
        1. 10.2.2.1 Results
      3. 10.2.3 Application Curves
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Example
  13. 13デバイスおよびドキュメントのサポート
    1. 13.1 ドキュメントのサポート
      1. 13.1.1 関連資料
    2. 13.2 関連リンク
    3. 13.3 ドキュメントの更新通知を受け取る方法
    4. 13.4 コミュニティ・リソース
    5. 13.5 商標
    6. 13.6 静電気放電に関する注意事項
    7. 13.7 Glossary
  14. 14メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

7 Specifications

7.1 Absolute Maximum Ratings(1)

over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
Input voltage VIN –0.3 6 V
VEN –0.3 VIN + 0.3 V
Operating temperature, TA –55 150 °C
Junction temperature, Tj 150 °C
Storage temperature, Tstg –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

7.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±1000 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±250
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

MIN NOM MAX UNIT
VIN Supply input voltage
(IOUT = 0 mA)		 REF6025 3 5.5 V
REF6030, REF6033, REF6041, REF6045 VOUT + 0.25 5.5
REF6050 5.3 5.5
VEN Enable voltage 0 VIN V
IL Output current REF6025, REF6030, REF6033, REF6041 –4 4 mA
REF6045 –3.5 3.5
REF6050 –3 3
TA Operating temperature –40 25 125 °C

7.4 Thermal Information

THERMAL METRIC(1) REF60xx UNIT
DGK (VSSOP)
8 PINS
RθJA Junction-to-ambient thermal resistance 158.5 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 51.2 °C/W
RθJB Junction-to-board thermal resistance 79.5 °C/W
ψJT Junction-to-top characterization parameter 5.2 °C/W
ψJB Junction-to-board characterization parameter 78.0 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance N/A °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

7.5 Electrical Characteristics

at TA = 25°C, VIN = 5 V for all devices except REF6050, VIN = 5.4 V for REF6050, IL = 0 mA, CL = 22 µF, CFILT = 1 µF, and VEN = 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
ACCURACY AND DRIFT
Output voltage accuracy -0.05% 0.05%
Output voltage temperature coefficient(1) 5 ppm/°C
LINE AND LOAD REGULATION
ΔVO(ΔVI) Line regulation REF6025 VOUT + 0.5 V ≤ VIN ≤ 5.5 V TA = 25°C 4 20 ppm/V
TA = –40°C to +125°C 30
REF6030, REF6033, REF6041, REF6045 VOUT + 0.25 V ≤ VIN ≤ 5.5 V TA = 25°C 4 20
TA = –40°C to +125°C 30
REF6050 VOUT + 0.3 V ≤ VIN ≤ 5.5 V TA = 25°C 7 60
TA = –40°C to +125°C 120
ΔVO(ΔIL) Load regulation, sourcing and sinking REF6025, REF6030, REF6033, REF6041 IL = 0 mA to 4 mA,
VIN = VOUT + 600 mV		 TA = 25°C 2 20 ppm/mA
TA = –40°C to +125°C 30
REF6045 IL = 0 mA to 3.5 mA,
VIN = VOUT + 600 mV		 TA = 25°C 2 20
TA = –40°C to +125°C 30
REF6050 IL = 0 mA to 3 mA,
VIN = VOUT + 400 mV		 TA = 25°C 2 20
TA = –40°C to +125°C 50
ISC Short-circuit current SS = open 10.5 mA
NOISE
Total integrated noise CL = 22 µF 5 µVRMS
CL = 47 µF 5
Low frequency noise 0.1 Hz ≤ f ≤ 10 Hz 3 µVPP/V
OUTPUT IMPEDANCE
Output impedance f = DC to 200 kHz, CL= 47 μF 50 mΩ
TURN-ON TIME
ton Turn-on time 0.1% settling, CL = 47 µF, SS = open, REF6025 100 ms
HYSTERESIS AND LONG TERM DRIFT
Long term stability 0 to 1000h at 25°C 80 ppm
1000h to 2000h at 25°C 20
Output voltage hysteresis(2) 25°C, –40°C,125°C, 25°C (cycle 1) 33 ppm
25°C, –40°C,125°C, 25°C (cycle 2) 8
CAPACITIVE LOAD
CL Stable output capacitor value 10 47 µF
OUTPUT VOLTAGE
VOUT Output voltage REF6025 2.5 V
REF6030 3
REF6033 3.3
REF6041 4.096
REF6045 4.5
REF6050 5
POWER SUPPLY
ICC Supply current REF6025, REF6030, REF6033, REF6041 Active mode, VEN = 5 V TA = 25°C 0.82 0.90 mA
TA = –40°C to +125°C 1.1
REF6045, REF6050 Active mode, VEN = 5 V TA = 25°C 0.83 0.95
TA = –40°C to +125°C 1.15
Shutdown mode, VEN = 0 V TA = 25°C 1 3 µA
TA = –40°C to +125°C 15
Enable pin voltage Voltage reference in active mode (EN = 1) 1.6 V
Voltage reference in shutdown mode (EN = 0) 0.6
Enable pin current VEN = 5 V 100 150 nA
Dropout voltage REF6025 IL = 0 mA 500 500 mV
IL = 4 mA 600
REF6030, REF6033, REF6041 IL = 0 mA 50 250
IL = 4 mA 600
REF6045 IL = 0 mA 50 250
IL = 3.5 mA 600
REF6050 IL = 0 mA 100 300
IL = 3 mA 400
(1) Temperature drift is specified according to the box method. See the Feature Description section for more details.
(2) See the Thermal Hysteresis section.

7.6 Typical Characteristics

at TA = 25°C, IL = 0 mA, and VIN = 5 V, using REF6025 (unless otherwise noted)
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C002_SBOS708.png
TA = –40°C to +125°C
Figure 1. Drift Distribution
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C005_SBOS708.png
Figure 3. Initial Accuracy Distribution
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C001_SBOS708.png
Figure 5. Output Voltage Accuracy vs Temperature
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C006_SBOS708.png
VIN = VOUT + 600 mV,
IL = 0 mA to 4 mA
Figure 7. Load Regulation Sourcing vs Temperature
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C010_SBOS748.png
VOUT + 0.25 V ≤ VIN ≤ 5.5 V
Figure 9. Line Regulation vs Temperature
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C020_SBOS708.png
Figure 11. Supply Current vs Input Voltage
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C021_SBOS708.png
Figure 13. 0.1-Hz to 10-Hz Noise
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C011_SBOS708.png
Figure 15. PSRR vs Frequency
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C014_SBOS708.png
Load current = ±1 mA
Figure 17. Load Transient Response
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C013_SBOS708.png
Figure 19. Line Transient Response
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C027_SBOS708.png
Figure 21. Thermal Hysteresis Distribution (Cycle 2)
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C024_SBOS708.png
REF6050 driving REF pin of ADS8881,
fIN = 1 kHz, SNR = 100.5 dB, THD = –125.9 dB
Figure 23. Typical FFT Plot
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C038_SBOS708.png
REF6050 driving REF pin of ADS8881,
fIN = 10 kHz, SNR = 99.2 dB, THD = –119.4 dB
Figure 25. Typical FFT Plot
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C031_SBOS708.png
REF6041 driving REF pin of ADS8881,
fIN = 2 kHz, SNR = 99 dB, THD = –123.6 dB
Figure 27. Typical FFT Plot
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C033_SBOS708.png
REF6025 driving REF pin of ADS8881,
fIN = 1 kHz, SNR = 95.4 dB, THD = –124 dB
Figure 29. Typical FFT Plot
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C035_SBOS708.png
REF6025 driving REF pin of ADS8881,
fIN = 10 kHz, SNR = 94.0 dB, THD = –119.3 dB
Figure 31. Typical FFT Plot
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C048_SBOS708.png
REF6050 driving REF pin of ADS8881 operating at 1 MSPS,
negative full-scale input to ADS8881
Figure 33. Reference Droop
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C050_SBOS708.png
AINP = AINN = VREF / 2 for ADS8881,
sampling rate = 1 MSPS
Figure 35. DC Input Histogram
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C052_SBOS708.png
AINP = AINN = VREF / 2 for ADS8881,
sampling rate = 100 kSPS
Figure 37. DC Input Histogram
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C042_SBOS708.png
1 LSB = 19.07 µV, with ADS8881 at 1 MSPS
Figure 39. Reference Droop Comparison
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C003_SBOS708.png
TA = –40°C to +85°C
Figure 2. Drift Distribution
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C004_SBOS708.png
Figure 4. Solder-Heat Shift Distribution
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C017_SBOS708.png
Figure 6. Dropout Voltage vs Load Current
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C007_SBOS708.png
VIN = VOUT + 600 mV,
IL = 0 mA to 4 mA
Figure 8. Load Regulation Sinking vs Temperature
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C019_SBOS708.png
Figure 10. Supply Current vs Temperature
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C018_SBOS708.png
Figure 12. Turn-On Settling Time
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C022_SBOS708.png
Figure 14. Output-Voltage Noise Spectrum
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C025_SBOS708.png
Graph obtained by design simulation
Figure 16. Output Impedance vs Frequency
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C015_SBOS708.png
Load current = ±3 mA
Figure 18. Load Transient Response
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C028_SBOS708.png
Figure 20. Thermal Hysteresis Distribution (Cycle 1)
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C063_SBOS708.png
Figure 22. Output Impedance Comparison
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C037_SBOS708.png
REF6050 driving REF pin of ADS8881,
fIN = 2 kHz, SNR = 100.4 dB, THD = –123.9 dB
Figure 24. Typical FFT Plot
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C030_SBOS708.png
REF6041 driving REF pin of ADS8881,
fIN = 1 kHz, SNR = 99 dB, THD = –124.4 dB
Figure 26. Typical FFT Plot
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C032_SBOS708.png
REF6041 driving REF pin of ADS8881,
fIN = 10 kHz, SNR = 97.2 dB, THD = –119.7 dB
Figure 28. Typical FFT Plot
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C034_SBOS708.png
REF6025 driving REF pin of ADS8881,
fIN = 2 kHz, SNR = 95.4 dB, THD = –123.5 dB
Figure 30. Typical FFT Plot
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C047_SBOS708.png
REF6050 driving REF pin of ADS8881 operating at 1 MSPS,
positive full-scale input to ADS8881
Figure 32. Reference Droop
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C049_SBOS708.png
REF6050 driving REF pin of ADS8881 operating at 1 MSPS,
AINP = AINN = VREF / 2 for ADS8881
Figure 34. Reference Droop
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C051_SBOS708.png
AINP = AINN = VREF / 2 for ADS8881,
sampling rate = 500 kSPS
Figure 36. DC Input Histogram
REF6025 REF6030 REF6033 REF6041 REF6045 REF6050 C053_SBOS708.png
AINP = AINN = VREF / 2 for ADS8881,
sampling rate = 20 kSPS
Figure 38. DC Input Histogram