7.4.4 Normal Operation: DC Input mode
The device regulates to the nominal output voltage when the following conditions are met:
- As mentioned before, DC input mode is available with DC supply voltage applied on SCIN pin bounded by VSCIN (max) > VSCIN > UVLOSCIN_RISING at startup as specified in the Recommended Operating Conditions and Electrical Characterstics tables.
- The output current is less than the current limit (IOUT < ICL)
- The junction temperature is less than the thermal shutdown temperature (TJ < TSD for rising)
- Dropout voltage VDO > 0.25 V; see the Dropout Mode section and Figure 7 for more details