1.3V、マイクロパワー、シングルチャネル・コーデック

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
NEW TAC5111 プレビュー ダイナミック レンジが 100dB の ADC とダイナミック レンジ が106dB の DAC 搭載、低消費電力、モノラル オーディオ コーデック Improved SNR

製品詳細

Number of ADC channels 1 Number of DAC channels 1 Digital audio interface DSP Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 40 Rating Catalog ADC SNR (typ) (dB) 87 Operating temperature range (°C) 0 to 70
Number of ADC channels 1 Number of DAC channels 1 Digital audio interface DSP Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 40 Rating Catalog ADC SNR (typ) (dB) 87 Operating temperature range (°C) 0 to 70
VQFN (RHB) 32 25 mm² 5 x 5
  • Single Channel Codec
  • Noise Shaped Delta Sigma ADC and DAC Technology
  • Low Supply Voltage and Current:
    • 1.3-V Typical Power Supply
    • 350-µA Typical Supply Current Drain
  • Power Supply Up Monitor and Low Battery Monitor That Also Automatically Shuts Off H-Bridge Output When Battery Decays Below 1.05 V in a Nontransient Manner
  • Typical 2.4-µVrms Input Referred Noise With 0.01% Total Harmonic Distortion for Front End and 108-dB Dynamic Range
  • ADC Has 87-dB Dynamic Range With 73-dB Total Harmonic Distortion 100 Hz–10 kHz, 40-kHz Sampling Rate
  • Typical 55-dB PSRR 100 Hz to 10 kHz for Analog Front End
  • Low Noise Programmable Gain Amplifier/Compressor Front End With Programmable Fast and Slow Attack and Decay Rates With Dual or Single Attack and Decay Rate Option
  • Typical Output Noise of 12 µVrms With 0.05% Total Harmonic Distortion for Delta Sigma DAC and H-Bridge Output Driver
  • Low Jitter Oscillator That Generates all Internal Clocks and Generates 5-MHz Output DSP/µC Clock
  • Regulated Bandgap Voltage Reference
  • Programmable Functionality via Digital Serial Interface
    • McBSP Interface, DSP Protocol
    • TI TMS320VC54x™, TMS320VC55x™ DSPs
    • SPI Interface, Microcontroller Protocol
    • TI MSP430xx
  • External Chip Power Down and Reset
  • Available in:
    • 32-Pin QFN 5×5-mm Plastic Package
    • 32-Pad Bumped Die in Waffle Pack (wafer scale packaging)
  • APPLICATIONS
    • Hearing Instruments
    • Personal Medical Devices
    • Hearing Protection
    • Aural Processing
    • Low-Power Headsets

  • Single Channel Codec
  • Noise Shaped Delta Sigma ADC and DAC Technology
  • Low Supply Voltage and Current:
    • 1.3-V Typical Power Supply
    • 350-µA Typical Supply Current Drain
  • Power Supply Up Monitor and Low Battery Monitor That Also Automatically Shuts Off H-Bridge Output When Battery Decays Below 1.05 V in a Nontransient Manner
  • Typical 2.4-µVrms Input Referred Noise With 0.01% Total Harmonic Distortion for Front End and 108-dB Dynamic Range
  • ADC Has 87-dB Dynamic Range With 73-dB Total Harmonic Distortion 100 Hz–10 kHz, 40-kHz Sampling Rate
  • Typical 55-dB PSRR 100 Hz to 10 kHz for Analog Front End
  • Low Noise Programmable Gain Amplifier/Compressor Front End With Programmable Fast and Slow Attack and Decay Rates With Dual or Single Attack and Decay Rate Option
  • Typical Output Noise of 12 µVrms With 0.05% Total Harmonic Distortion for Delta Sigma DAC and H-Bridge Output Driver
  • Low Jitter Oscillator That Generates all Internal Clocks and Generates 5-MHz Output DSP/µC Clock
  • Regulated Bandgap Voltage Reference
  • Programmable Functionality via Digital Serial Interface
    • McBSP Interface, DSP Protocol
    • TI TMS320VC54x™, TMS320VC55x™ DSPs
    • SPI Interface, Microcontroller Protocol
    • TI MSP430xx
  • External Chip Power Down and Reset
  • Available in:
    • 32-Pin QFN 5×5-mm Plastic Package
    • 32-Pad Bumped Die in Waffle Pack (wafer scale packaging)
  • APPLICATIONS
    • Hearing Instruments
    • Personal Medical Devices
    • Hearing Protection
    • Aural Processing
    • Low-Power Headsets

The AIC111 IC design specification serves to provide product development teams with a guideline for how the AIC111 IC is specified and programmable options that are available. The document outlines a top-level block description of the IC along with system specifications and functions. Individual block descriptions and target specifications are also outlined.

The Texas Instruments AIC111 is a TI µPower DSP compatible, or microcontroller compatible audio codec product, or analog interface circuit. The AIC111 is part of a comprehensive family of DSP/µC based high-performance analog interface solutions. The AIC111 is targeted primarily at personal medical devices, such as hearing instruments, aural preprocessing applications, and low-power headset applications. The AIC111 is used in any design requiring a programmable time constant PGA/compressor interface, high dynamic range analog-to-digital converter, an external DSP/µC handling signal processing, or a low distortion digital-to-analog converter with a balanced H-Bridge speaker driver. It supports a CMOS digital interface tailored for TI DSPs with the McBSP protocol such as TMS320VC54x™ DSP family and SPI-based controllers such as TI MSP430x family of microcontrollers. The AIC111 also has an external microphone or sensor supply and bias and power supply up low-battery monitor indicator.

The AIC111 comes in a 32-pin QFN 5×5-mm package. A 32-pad solder ball bumped flip chip die that comes in waffle packs or tape and reel is in preview and will be available 3rd quarter 2003.

The AIC111 IC design specification serves to provide product development teams with a guideline for how the AIC111 IC is specified and programmable options that are available. The document outlines a top-level block description of the IC along with system specifications and functions. Individual block descriptions and target specifications are also outlined.

The Texas Instruments AIC111 is a TI µPower DSP compatible, or microcontroller compatible audio codec product, or analog interface circuit. The AIC111 is part of a comprehensive family of DSP/µC based high-performance analog interface solutions. The AIC111 is targeted primarily at personal medical devices, such as hearing instruments, aural preprocessing applications, and low-power headset applications. The AIC111 is used in any design requiring a programmable time constant PGA/compressor interface, high dynamic range analog-to-digital converter, an external DSP/µC handling signal processing, or a low distortion digital-to-analog converter with a balanced H-Bridge speaker driver. It supports a CMOS digital interface tailored for TI DSPs with the McBSP protocol such as TMS320VC54x™ DSP family and SPI-based controllers such as TI MSP430x family of microcontrollers. The AIC111 also has an external microphone or sensor supply and bias and power supply up low-battery monitor indicator.

The AIC111 comes in a 32-pin QFN 5×5-mm package. A 32-pad solder ball bumped flip chip die that comes in waffle packs or tape and reel is in preview and will be available 3rd quarter 2003.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
9 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート IC Design Specification 1.3-V microPower(TM) DSP/uC Voice Band Audio CODEC データシート (Rev. A) 2006年 1月 24日
アプリケーション・ノート Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 2019年 12月 31日
アプリケーション・ノート Audio Serial Interface Configurations for Audio Codecs (Rev. A) 2019年 6月 27日
アプリケーション・ノート Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 2013年 10月 28日
アプリケーション・ノート Audio Serial Interface Configurations for Audio Codecs 2010年 9月 22日
アプリケーション・ノート Solving Enumeration Errors in USB Audio DAC and CODEC Designs 2009年 10月 30日
アプリケーション・ノート Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 2009年 7月 8日
アプリケーション・ノート How to Set the TSC/AIC EVM to Record & Playback Audio or Other Sound Through PC 2004年 12月 14日
アプリケーション・ノート Efficient Resampling Filters for the AIC111 2004年 2月 25日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
VQFN (RHB) 32 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ