ホーム パワー・マネージメント バッテリ管理 IC バッテリ・チャージャ IC

ユーザー選択可能な充電アルゴリズム採用スイッチ・モード鉛バッテリ・チャージャ

BQ2031 は生産中止予定です
以下の代替品のいずれかをご検討ください。
open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
BQ24610 アクティブ 5V ~ 28V 入力、スタンドアロン、1 ~ 6 セル、降圧バッテリ充電コントローラ Better flexibility for programming the charge voltage

製品詳細

Number of series cells 6 Charge current (max) (A) 2 Vin (max) (V) 5.5 Cell chemistry Lead Acid Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 20 Absolute max Vin (max) (V) 7 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 4.5 Rating Catalog Operating temperature range (°C) -20 to 70
Number of series cells 6 Charge current (max) (A) 2 Vin (max) (V) 5.5 Cell chemistry Lead Acid Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 20 Absolute max Vin (max) (V) 7 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 4.5 Rating Catalog Operating temperature range (°C) -20 to 70
PDIP (N) 16 181.42 mm² 19.3 x 9.4 SOIC (D) 16 59.4 mm² 9.9 x 6
  • Conforms to battery manufacturers' charge recommendations for cyclic and float charge
  • Pin-selectable charge algorithms

  • - Two-Step Voltage with temperature-compensated constant-voltage maintenance
    - Two-Step Current with constant-rate pulsed current maintenance
    - Pulsed Current: hysteretic, on-demand pulsed current
  • Pin-selectable charge termination by maximum voltage, 2V, minimum current, and maximum time
  • Pre-charge qualification detects shorted, opened, or damaged cells and conditions battery
  • Charging continuously qualified by temperature and voltage limits
  • Internal temperature-compensated voltage reference
  • Pulse-width modulation control

  • - Ideal for high-efficiency switch-mode power conversion
    - Configurable for linear or gated current use
  • Direct LED control outputs display charge status and fault conditions
  • Conforms to battery manufacturers' charge recommendations for cyclic and float charge
  • Pin-selectable charge algorithms

  • - Two-Step Voltage with temperature-compensated constant-voltage maintenance
    - Two-Step Current with constant-rate pulsed current maintenance
    - Pulsed Current: hysteretic, on-demand pulsed current
  • Pin-selectable charge termination by maximum voltage, 2V, minimum current, and maximum time
  • Pre-charge qualification detects shorted, opened, or damaged cells and conditions battery
  • Charging continuously qualified by temperature and voltage limits
  • Internal temperature-compensated voltage reference
  • Pulse-width modulation control

  • - Ideal for high-efficiency switch-mode power conversion
    - Configurable for linear or gated current use
  • Direct LED control outputs display charge status and fault conditions

The bq2031 Lead-Acid Fast Charge IC is designed to optimize charging of lead-acid chemistry batteries. A flexible pulse-width modulation regulator allows the bq2031 to control constant-voltage, constant-current, or pulsed-current charging. The regulator frequency is set by an external capacitor for design flexibility. The switch-mode design keeps power dissipation to a minimum for high charge current applications.

A charge cycle begins when power is applied or the battery is replaced. For safety, charging is inhibited until the battery voltage is within configured limits. If the battery voltage is less than the low-voltage threshold, the bq2031 provides trickle-currentcharging until the voltage rises into the allowed range or an internal timer runs out and places the bq2031 in a Fault condition. This procedure prevents high-current charging of cells that are possibly damaged or reversed. Charging is inhibited anytime the temperature of the battery is outside the configurable, allowed range. All voltage thresholds are temperature-compensated.

The bq2031 terminates fast (bulk) charging based on the following:

  • Maximum voltage
  • Second difference of cell voltage (2V)
  • Minimum current (in constant-voltage charging)
  • Maximum time-out (MTO)
  • After bulk charging, the bq2031 provides temperature-compensated maintenance (float) charging to maintain battery capacity.

    The bq2031 Lead-Acid Fast Charge IC is designed to optimize charging of lead-acid chemistry batteries. A flexible pulse-width modulation regulator allows the bq2031 to control constant-voltage, constant-current, or pulsed-current charging. The regulator frequency is set by an external capacitor for design flexibility. The switch-mode design keeps power dissipation to a minimum for high charge current applications.

    A charge cycle begins when power is applied or the battery is replaced. For safety, charging is inhibited until the battery voltage is within configured limits. If the battery voltage is less than the low-voltage threshold, the bq2031 provides trickle-currentcharging until the voltage rises into the allowed range or an internal timer runs out and places the bq2031 in a Fault condition. This procedure prevents high-current charging of cells that are possibly damaged or reversed. Charging is inhibited anytime the temperature of the battery is outside the configurable, allowed range. All voltage thresholds are temperature-compensated.

    The bq2031 terminates fast (bulk) charging based on the following:

  • Maximum voltage
  • Second difference of cell voltage (2V)
  • Minimum current (in constant-voltage charging)
  • Maximum time-out (MTO)
  • After bulk charging, the bq2031 provides temperature-compensated maintenance (float) charging to maintain battery capacity.

    ダウンロード 字幕付きのビデオを表示 ビデオ

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    7 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート Lead-Acid Fast-Charge IC データシート 1999年 9月 5日
    セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
    アプリケーション・ノート Simple MPPT based Lead acid charger using BQ2031 (Rev. A) 2017年 8月 8日
    Analog Design Journal 4Q 2011 Issue Analog Applications Journal 2011年 11月 9日
    Analog Design Journal Solar charging solution provides narrow-voltage DC/DC system bus for multicell 2011年 11月 9日
    ユーザー・ガイド DV2031S2 Lead-Acid Charger Development System Control of On-Board p-FET (Rev. B) 2007年 3月 16日
    アプリケーション・ノート U-510 Using the bq2031 to Charge Lead-Acid Batteries 1999年 9月 5日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    評価基板 (EVM) 向けの GUI

    SLVC024 bq24715 EVM GUI Package

    サポート対象の製品とハードウェア

    サポート対象の製品とハードウェア

    製品
    バッテリ・チャージャ IC
    BQ2000 ピーク電圧検出による充電終了機能搭載、スイッチ・モード、マルチケミストリー・バッテリ・チャージャ BQ2000T dT/dt に基づく充電終了機能搭載、スイッチ・モード、マルチケミストリー・バッテリ・チャージャ BQ2002 負の dV と PVT に対処、Top-Off Time (充電終了時間) setup1 に対応、NiCd/NiMH バッテリ充電コントローラ BQ2002C 負の dV と PVT に対処、NiCd/NiMH バッテリ充電コントローラ BQ2002D dT/dt に基づく充電終了機能搭載、NiCd/NiMH バッテリ充電コントローラ BQ2002E 負の dV と PVT に対処、tMTO setup1 に対応、NiCd/NiMH バッテリ充電コントローラ BQ2002F 負の dV と PVT に対処、Top-Off Time (充電終了時間) setup2 に対応、NiCd/NiMH バッテリ充電コントローラ BQ2002G 負の dV と PVT に対処、tMTO setup2 に対応、NiCd/NiMH バッテリ充電コントローラ BQ2002T dT/dt に基づく充電終了、低温異常検出機能搭載、NiCd/NiMH バッテリ充電コントローラ BQ2031 ユーザー選択可能な充電アルゴリズム採用スイッチ・モード鉛バッテリ・チャージャ BQ2057C AutoComp(TM) 採用、4.2V、低ドロップアウト・リニア 1 セル・リチウムイオン・バッテリ充電コントローラ BQ24010 AC 検出機能と温度センス機能搭載、QFN-11 パッケージ封止、1 セル、1A、リニア・リチウムイオン・バッテリ・チャージャ BQ24012 FET と AC 検出機能と充電イネーブル搭載、QFN-12 封止、1 セル、1A、リニア・リチウムイオン・バッテリ・チャージャ BQ24013 充電イネーブルと充電終了イネーブル搭載、QFN-11 パッケージ封止、1 セル、1A、リニア・リチウムイオン・バッテリ・チャージャ BQ24200 電流制限型アプリケーション向け、温度センス機能搭載、MSOP-8 封止、500mA、4.2V リチウムイオン・チャージャ BQ24201 電流制限型アプリケーション向け、温度センス機能搭載、MSOP-8 封止、500mA、4.1V リチウムイオン・チャージャ BQ24202 電流制限型アプリケーション向け、充電ステータス機能搭載、MSOP-8 封止、500mA、4.2V リチウムイオン・チャージャ BQ24203 電流制限型アプリケーション向け、充電ステータス機能搭載、MSOP-8 封止、500mA、4.1V リチウムイオン・チャージャ BQ24205 電流制限型アプリケーション向け、MSOP-8 封止、500mA、4.1V リチウムイオン・チャージャ BQ24715 N チャネル MOSFET セレクタ搭載、SMBus、2 ~ 3 セル、NVDC 降圧バッテリ充電コントローラ
    ソフトウェア
    サポート・ソフトウェア
    TEMPSENSE-SW 温度感知設計者用ソフトウェア
    サポート・ソフトウェア

    TEMPSENSE-SW — 温度感知設計者用ソフトウェア

    The TempSense Designer software allows the user to easily design temperature sensing circuits for many of the Texas Instruments battery charger devices. A full listing of the supported devices is included under the "Support" menu in the program. The user can use the thermisters included in the (...)
    パッケージ ピン数 ダウンロード
    PDIP (N) 16 オプションの表示
    SOIC (D) 16 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ