ホーム パワー・マネージメント バッテリ管理 IC バッテリ・チャージャ IC

BQ24010

アクティブ

AC 検出機能と温度センス機能搭載、QFN-11 パッケージ封止、1 セル、1A、リニア・リチウムイオン・バッテリ・チャージャ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
BQ25170 アクティブ 1 セル、リチウムイオンと LiFePO4 向け、800mA リニア・バッテリ・チャージャ Supports multiple resistor programmable battery voltage with lower IQ

製品詳細

Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 16.5 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 4.2 Battery charge voltage (max) (V) 4.2 Absolute max Vin (max) (V) 18 Control topology Linear Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 16.5 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 4.2 Battery charge voltage (max) (V) 4.2 Absolute max Vin (max) (V) 18 Control topology Linear Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 85
VSON (DRC) 10 9 mm² 3 x 3
  • Small 3-mm × 3-mm MLP (QFN) Package
  • Ideal for Low-Dropout Designs for Single-Cell Li-Ion
    or Li-Pol Packs in Space Limited Applications
  • Integrated Power FET and Current Sensor for Up to 1-A
    Charge Applications
  • Reverse Leakage Protection Prevents Battery Drainage
  • Integrated Current and Voltage Regulation
  • ±0.5% Voltage Regulation Accuracy
  • Charge Termination by Minimum Current and Time
  • Pre-Charge Conditioning With Safety Timer
  • Status Outputs for LED or System Interface Indicates
    Charge and Fault Conditions
  • Battery Insertion and Removal Detection
  • Works With Regulated and Unregulated Supplies
  • Short-Circuit Protection
  • Charge Voltage Options: 4.2 V and 4.36 V
  • Small 3-mm × 3-mm MLP (QFN) Package
  • Ideal for Low-Dropout Designs for Single-Cell Li-Ion
    or Li-Pol Packs in Space Limited Applications
  • Integrated Power FET and Current Sensor for Up to 1-A
    Charge Applications
  • Reverse Leakage Protection Prevents Battery Drainage
  • Integrated Current and Voltage Regulation
  • ±0.5% Voltage Regulation Accuracy
  • Charge Termination by Minimum Current and Time
  • Pre-Charge Conditioning With Safety Timer
  • Status Outputs for LED or System Interface Indicates
    Charge and Fault Conditions
  • Battery Insertion and Removal Detection
  • Works With Regulated and Unregulated Supplies
  • Short-Circuit Protection
  • Charge Voltage Options: 4.2 V and 4.36 V

The bqTINY™ series are highly integrated Li-Ion and Li-Pol linear charge management devices targeted at space limited portable applications. The bqTINY™ series offer integrated powerFET and current sensor, reverse blocking protection, high accuracy current and voltage regulation, charge status, and charge termination, in a small package.

The bqTINY™ charges the battery in three phases: conditioning, constant current, and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety feature for charge termination. The bqTINY™ automatically restarts the charge if the battery voltage falls below an internal threshold. The bqTINY™ automatically enters sleep mode when VCC supply is removed.

In addition to the standard features, different versions of the bqTINY™ offer a multitude of additional features. These include temperature sensing input for detecting hot or cold battery packs; power good (PG) output indicating the presence of valid input power; a TTL-level charge-enable input (CE) used to disable or enable the charge process; and a TTL-level timer and termination enable (TTE) input used to disable or enable the fast-charge timer and charge termination.

The bqTINY™ series are highly integrated Li-Ion and Li-Pol linear charge management devices targeted at space limited portable applications. The bqTINY™ series offer integrated powerFET and current sensor, reverse blocking protection, high accuracy current and voltage regulation, charge status, and charge termination, in a small package.

The bqTINY™ charges the battery in three phases: conditioning, constant current, and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety feature for charge termination. The bqTINY™ automatically restarts the charge if the battery voltage falls below an internal threshold. The bqTINY™ automatically enters sleep mode when VCC supply is removed.

In addition to the standard features, different versions of the bqTINY™ offer a multitude of additional features. These include temperature sensing input for detecting hot or cold battery packs; power good (PG) output indicating the presence of valid input power; a TTL-level charge-enable input (CE) used to disable or enable the charge process; and a TTL-level timer and termination enable (TTE) input used to disable or enable the fast-charge timer and charge termination.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
BQ24210 アクティブ 800mA、シングル入力、シングル・セル・リチウムイオン・ソーラー・バッテリ・チャージャ This product is a 800-mA, single-input, single-cell Li-Ion battery charger

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
6 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Single-Chip, Li-Ion Charge Management IC For Handheld Applications (bqTINY) データシート (Rev. K) 2014年 1月 27日
アプリケーション・ノート QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023年 12月 6日
アプリケーション・ノート QFN/SON の PCB 実装 (Rev. A 翻訳版) 最新英語版 (Rev.C) PDF | HTML 2010年 9月 30日
Analog Design Journal Designing a linear Li-Ion battery charger with power-path control 2009年 5月 1日
Analog Design Journal Q2 2009 Issue Analog Applications Journal 2009年 5月 1日
ユーザー・ガイド 1-A Single-Chip Li-Ion & Li-Pol Charge Management IC w/Integrated PowerFET (Rev. A) 2002年 10月 29日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

BQ24010EVM — BQ24010 1A リチウムイオン・チャージャー 評価モジュール、パワーグッド/温度検出付

The bq24010EVM is an evaluation tool for the bq24010 linear single-cell Li-Ion charger with integrated FET and current sense in 3x3mm2 QFN package. The EVM is a complete designed-and-tested charger circuit that allows the user to test all functions of the bq24010 and to charge a single-cell Li-Ion (...)

ユーザー ガイド: PDF
評価基板 (EVM) 向けの GUI

SLVC024 bq24715 EVM GUI Package

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
バッテリ・チャージャ IC
BQ2000 ピーク電圧検出による充電終了機能搭載、スイッチ・モード、マルチケミストリー・バッテリ・チャージャ BQ2000T dT/dt に基づく充電終了機能搭載、スイッチ・モード、マルチケミストリー・バッテリ・チャージャ BQ2002 負の dV と PVT に対処、Top-Off Time (充電終了時間) setup1 に対応、NiCd/NiMH バッテリ充電コントローラ BQ2002C 負の dV と PVT に対処、NiCd/NiMH バッテリ充電コントローラ BQ2002D dT/dt に基づく充電終了機能搭載、NiCd/NiMH バッテリ充電コントローラ BQ2002E 負の dV と PVT に対処、tMTO setup1 に対応、NiCd/NiMH バッテリ充電コントローラ BQ2002F 負の dV と PVT に対処、Top-Off Time (充電終了時間) setup2 に対応、NiCd/NiMH バッテリ充電コントローラ BQ2002G 負の dV と PVT に対処、tMTO setup2 に対応、NiCd/NiMH バッテリ充電コントローラ BQ2002T dT/dt に基づく充電終了、低温異常検出機能搭載、NiCd/NiMH バッテリ充電コントローラ BQ2031 ユーザー選択可能な充電アルゴリズム採用スイッチ・モード鉛バッテリ・チャージャ BQ2057C AutoComp(TM) 採用、4.2V、低ドロップアウト・リニア 1 セル・リチウムイオン・バッテリ充電コントローラ BQ24010 AC 検出機能と温度センス機能搭載、QFN-11 パッケージ封止、1 セル、1A、リニア・リチウムイオン・バッテリ・チャージャ BQ24012 FET と AC 検出機能と充電イネーブル搭載、QFN-12 封止、1 セル、1A、リニア・リチウムイオン・バッテリ・チャージャ BQ24013 充電イネーブルと充電終了イネーブル搭載、QFN-11 パッケージ封止、1 セル、1A、リニア・リチウムイオン・バッテリ・チャージャ BQ24200 電流制限型アプリケーション向け、温度センス機能搭載、MSOP-8 封止、500mA、4.2V リチウムイオン・チャージャ BQ24201 電流制限型アプリケーション向け、温度センス機能搭載、MSOP-8 封止、500mA、4.1V リチウムイオン・チャージャ BQ24202 電流制限型アプリケーション向け、充電ステータス機能搭載、MSOP-8 封止、500mA、4.2V リチウムイオン・チャージャ BQ24203 電流制限型アプリケーション向け、充電ステータス機能搭載、MSOP-8 封止、500mA、4.1V リチウムイオン・チャージャ BQ24205 電流制限型アプリケーション向け、MSOP-8 封止、500mA、4.1V リチウムイオン・チャージャ BQ24715 N チャネル MOSFET セレクタ搭載、SMBus、2 ~ 3 セル、NVDC 降圧バッテリ充電コントローラ
ソフトウェア
サポート・ソフトウェア
TEMPSENSE-SW 温度感知設計者用ソフトウェア
サポート・ソフトウェア

TEMPSENSE-SW — 温度感知設計者用ソフトウェア

The TempSense Designer software allows the user to easily design temperature sensing circuits for many of the Texas Instruments battery charger devices. A full listing of the supported devices is included under the "Support" menu in the program. The user can use the thermisters included in the (...)
パッケージ ピン数 ダウンロード
VSON (DRC) 10 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ