BQ24190

アクティブ

I2C 制御、4.5A、シングル・セル、USB / アダプタ・チャージャ

ご注文はこちら

データシート

document-pdfAcrobat bq2419x I2C Controlled 4.5-A Single Cell USB/Adapter Charger with Narrow VDC Power Path Management and USB OTG データシート (Rev. B) (英語) PDF | HTML

BQ24190

アクティブ

データシート

ご注文はこちら

製品詳細

Number of series cells

1

Charge current (max) (A)

4.5

Vin (max) (V)

17

Cell chemistry

Li-Ion/Li-Polymer

Battery charge voltage (min) (V)

3.5

Battery charge voltage (max) (V)

4.4

Absolute max Vin (max) (V)

22

Control topology

Switch-Mode Buck

Control interface

I2C

Features

BAT temp thermistor monitoring (hot/cold profile), IINDPM (Input current limit), Input OVP, Power Path, USB D+/D-/BC1.2 integrated, USB OTG integrated

Vin (min) (V)

3.9

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of series cells

1

Charge current (max) (A)

4.5

Vin (max) (V)

17

Cell chemistry

Li-Ion/Li-Polymer

Battery charge voltage (min) (V)

3.5

Battery charge voltage (max) (V)

4.4

Absolute max Vin (max) (V)

22

Control topology

Switch-Mode Buck

Control interface

I2C

Features

BAT temp thermistor monitoring (hot/cold profile), IINDPM (Input current limit), Input OVP, Power Path, USB D+/D-/BC1.2 integrated, USB OTG integrated

Vin (min) (V)

3.9

Rating

Catalog

Operating temperature range (°C)

-40 to 85

VQFN (RGE)

24

16 mm² 4 x 4

High Efficiency 4.5-A Switch Mode Charger
- 92% Charge Efficiency at 2 A, 90% at 4 A
- Accelerate Charge Time by Battery Path Impedance
  Compensation
Compatible with MaxLife Technology for Faster
Charging When Used in Conjunction With bq27531
Highest Battery Discharge Efficiency with 12-mΩ
Battery Discharge MOSFET up to 9-A Discharge Current
Single Input USB-compliant/Adapter Charger
- USB Host or Charging Port D+/D- Detection
  Compatible to USB Battery Charger Spec 1.2
- Input Voltage and Current Limit Supports USB2.0
  and USB3.0
- Input Current Limit: 100 mA, 150 mA, 500 mA, 900 mA,
  1.2 A, 1.5 A, 2 A and 3 A
3.9-V to 17-V Input Operating Voltage Range
- Support All Kinds of Adapter with Input
  Voltage DPM Regulation
USB OTG 5 V at 1.3-A Synchronous Boost Converter
Operation
- 93% 5-V Boost Efficiency at 1 A
Narrow VDC (NVDC) Power Path Management
- Instant-on Works with No Battery or Deeply
  Discharged Battery
- Ideal Diode Operation in Battery Supplement Mode
1.5-MHz Switching Frequency for Low Profile Inductor
Autonomous Battery Charging with or without Host
Management
- Battery Charge Enable
- Battery Charge Preconditioning
- Charge Termination and Recharge
High Accuracy (0°C to 125°C)
- ±0.5% Charge Voltage Regulation
- ±7% Charge Current Regulation
- ±7.5% Input Current Regulation
- ±2% Output Regulation in Boost Mode
High Integration
- Power Path Management
- Synchronous Switching MOSFETs
- Integrated Current Sensing
- Bootstrap Diode
- Internal Loop Compensation
Safety
- Battery Temperature Sensing and Charging
  Safety Timer
- Thermal Regulation and Thermal Shutdown
- Input System Over-Voltage Protection
- MOSFET Over-Current Protection
Charge Status Outputs for LED or Host
Processor
Low Battery Leakage Current and Support Shipping
Mode
4.00 mm × 4.00 mm VQFN-24 Package

High Efficiency 4.5-A Switch Mode Charger
- 92% Charge Efficiency at 2 A, 90% at 4 A
- Accelerate Charge Time by Battery Path Impedance
  Compensation
Compatible with MaxLife Technology for Faster
Charging When Used in Conjunction With bq27531
Highest Battery Discharge Efficiency with 12-mΩ
Battery Discharge MOSFET up to 9-A Discharge Current
Single Input USB-compliant/Adapter Charger
- USB Host or Charging Port D+/D- Detection
  Compatible to USB Battery Charger Spec 1.2
- Input Voltage and Current Limit Supports USB2.0
  and USB3.0
- Input Current Limit: 100 mA, 150 mA, 500 mA, 900 mA,
  1.2 A, 1.5 A, 2 A and 3 A
3.9-V to 17-V Input Operating Voltage Range
- Support All Kinds of Adapter with Input
  Voltage DPM Regulation
USB OTG 5 V at 1.3-A Synchronous Boost Converter
Operation
- 93% 5-V Boost Efficiency at 1 A
Narrow VDC (NVDC) Power Path Management
- Instant-on Works with No Battery or Deeply
  Discharged Battery
- Ideal Diode Operation in Battery Supplement Mode
1.5-MHz Switching Frequency for Low Profile Inductor
Autonomous Battery Charging with or without Host
Management
- Battery Charge Enable
- Battery Charge Preconditioning
- Charge Termination and Recharge
High Accuracy (0°C to 125°C)
- ±0.5% Charge Voltage Regulation
- ±7% Charge Current Regulation
- ±7.5% Input Current Regulation
- ±2% Output Regulation in Boost Mode
High Integration
- Power Path Management
- Synchronous Switching MOSFETs
- Integrated Current Sensing
- Bootstrap Diode
- Internal Loop Compensation
Safety
- Battery Temperature Sensing and Charging
  Safety Timer
- Thermal Regulation and Thermal Shutdown
- Input System Over-Voltage Protection
- MOSFET Over-Current Protection
Charge Status Outputs for LED or Host
Processor
Low Battery Leakage Current and Support Shipping
Mode
4.00 mm × 4.00 mm VQFN-24 Package

The bq24190, bq24192, and bq24192I are highly-integrated switch-mode battery charge management and system power path management devices for single cell Li-Ion and Li-polymer battery in a wide range of tablet and other portable devices.

Its low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I²C serial interface with charging and system settings makes the device a truly flexible solution.

The device supports a wide range of input sources, including standard USB host port, USB charging port and high power DC adapter. To set the default input current limit, the bq24190 detects the input source following the USB battery charging spec 1.2, and the bq24192 and bq24192I take the results from detection circuit in the system, such as USB PHY device. The bq24190,192, and 192I are compliant with USB 2.0 and USB 3.0 power specifications with input current and voltage regulation. Meanwhile, the bq24190, bq24192, and bq24192I meet USB On-the-Go operation power rating specification by supplying 5 V on the VBUS with a current limit up to 1.3 A.

The power path management regulates the system slightly above battery voltage but does not drop below 3.5-V minimum system voltage (programmable). With this feature, the system maintains operation even when the battery is completely depleted or removed. When the input current limit or voltage limit is reached, the power path management automatically reduces the charge current to zero. As the system load continues to increase, the power path discharges the battery until the system power requirement is met. This supplement mode operation prevents overloading the input source.

The devices initiate and complete a charging cycle without software control. It automatically detects the battery voltage and charges the battery in three phases: pre-conditioning, constant current and constant voltage. At the end of the charging cycle, the charger automatically terminates when the charge current is below a preset limit in the constant voltage phase. When the full battery falls below the recharge threshold, the charger will automatically start another charging cycle.

The bq24190, bq24192, and bq24192I provide various safety features for battery charging and system operation, including dual pack negative thermistor monitoring, charging safety timer and over-voltage/over-current protections. The thermal regulation reduces charge current when the junction temperature exceeds 120°C (programmable).

The STAT output reports the charging status and any fault conditions. The PG output in the bq24192 and bq24192I indicates if a good power source is present. The INT immediately notifies the host when a fault occurs.

The bq24190, bq24192, and bq24192I are available in a 24-pin, 4.00 × 4.00 mm² thin VQFN package.