ホーム パワー・マネージメント バッテリ管理 IC バッテリ・チャージャ IC

BQ51010B

アクティブ

高集積ワイヤレス・レシーバ Qi (WPC V1.1) 準拠電源

製品詳細

Rating Catalog Operating temperature range (°C) -40 to 85
Rating Catalog Operating temperature range (°C) -40 to 85
DSBGA (YFP) 28 5.4 mm² 1.8 x 3
  • Integrated Wireless Power Supply Receiver
    Solution With a 7-V Regulated Supply
    • 93% Overall Peak AC-DC Efficiency
    • Full Synchronous Rectifier
    • WPC v1.1 Compliant Communication Control
    • Output Voltage Conditioning
    • Only IC Required Between RX Coil and 7-V
      Output
  • WPC v1.1 Compliant (FOD Enabled) Highly
    Accurate Current Sense
  • Dynamic Rectifier Control for Improved Load
    Transient Response
  • Dynamic Efficiency Scaling for Optimized
    Performance Over Wide Range of Output Power
  • Adaptive Communication Limit for Robust
    Communication
  • Supports 20-V Maximum Input
  • Low-power Dissipative Rectifier Overvoltage
    Clamp (VOVP = 15 V)
  • Thermal Shutdown
  • Multifunction NTC and Control Pin for
    Temperature Monitoring, Charge Complete and
    Fault Host Control
  • Integrated Wireless Power Supply Receiver
    Solution With a 7-V Regulated Supply
    • 93% Overall Peak AC-DC Efficiency
    • Full Synchronous Rectifier
    • WPC v1.1 Compliant Communication Control
    • Output Voltage Conditioning
    • Only IC Required Between RX Coil and 7-V
      Output
  • WPC v1.1 Compliant (FOD Enabled) Highly
    Accurate Current Sense
  • Dynamic Rectifier Control for Improved Load
    Transient Response
  • Dynamic Efficiency Scaling for Optimized
    Performance Over Wide Range of Output Power
  • Adaptive Communication Limit for Robust
    Communication
  • Supports 20-V Maximum Input
  • Low-power Dissipative Rectifier Overvoltage
    Clamp (VOVP = 15 V)
  • Thermal Shutdown
  • Multifunction NTC and Control Pin for
    Temperature Monitoring, Charge Complete and
    Fault Host Control

The bq51010B is a family of advanced, flexible, secondary-side devices for wireless power transfer in portable applications. The bq51010B devices provide the AC-DC power conversion and regulation while integrating the digital control required to comply with the Qi v1.1 communication protocol. Together with the bq50xxx primary-side controller, the bq51010B enables a complete contact-less power transfer system for a wireless power supply solution. Global feedback is established from the secondary to the primary to control the power transfer process using the Qi v1.1 protocol.

The bq51010B devices integrate a low resistance synchronous rectifier, low-dropout regulator, digital control, and accurate voltage and current loops to ensure high efficiency and low power dissipation.

The bq51010B also includes a digital controller that can calculate the amount of power received by the mobile device within the limits set by the WPC v1.1 standard. The controller will then communicate this information to the transmitter to allow the transmitter to determine if a foreign object is present within the magnetic interface and introduces a higher level of safety within magnetic field. This Foreign Object Detection (FOD) method is part of the requirements under the WPC v1.1 specification.

The bq51010B is a family of advanced, flexible, secondary-side devices for wireless power transfer in portable applications. The bq51010B devices provide the AC-DC power conversion and regulation while integrating the digital control required to comply with the Qi v1.1 communication protocol. Together with the bq50xxx primary-side controller, the bq51010B enables a complete contact-less power transfer system for a wireless power supply solution. Global feedback is established from the secondary to the primary to control the power transfer process using the Qi v1.1 protocol.

The bq51010B devices integrate a low resistance synchronous rectifier, low-dropout regulator, digital control, and accurate voltage and current loops to ensure high efficiency and low power dissipation.

The bq51010B also includes a digital controller that can calculate the amount of power received by the mobile device within the limits set by the WPC v1.1 standard. The controller will then communicate this information to the transmitter to allow the transmitter to determine if a foreign object is present within the magnetic interface and introduces a higher level of safety within magnetic field. This Foreign Object Detection (FOD) method is part of the requirements under the WPC v1.1 specification.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート bq51010B Highly Integrated Wireless Receiver Qi (WPC v1.1) Compliant Power Supply データシート (Rev. A) PDF | HTML 2016年 6月 30日
アプリケーション・ノート Test and Troubleshoot a Wireless Power Receiver 2014年 8月 6日
EVM ユーザー ガイド (英語) bq51010BEVM-764 Evaluation Module (WCSP Package) (Rev. A) 2013年 12月 11日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

計算ツール

SLUC577 Foreign Object Detection (FOD) Calibration/Tuning Tool

lock = 輸出許可が必要 (1 分)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
バッテリ・チャージャ IC
BQ51003 BQ51003 ワイヤレス・パワー・レシーバ BQ51010B 高集積ワイヤレス・レシーバ Qi (WPC V1.1) 準拠電源 BQ51013B WPC 1.1 互換、統合型、ワイヤレス・パワー・レシーバ IC BQ51020 5W (WPC) シングルチップ・ワイヤレス・パワー・レシーバ BQ51021 I2C 対応、5W (WPC) シングルチップ・ワイヤレス・パワー・レシーバ BQ51025 bq51025 10W WPC 準拠シングル・チップ・ワイヤレス・パワー・レシーバ BQ51050B Qi (WPC) 準拠、高集積、2 次側ダイレクト・リチウム・イオン・チャージャ。 BQ51051B Qi (WPC) 準拠、統合型ワイヤレス・パワー・リチウムイオン・チャージャ・レシーバ BQ51052B BQ51052B Qi (WPC) 準拠、高集積ワイヤレス・パワー・リチウムイオン・チャージャ・レシーバ BQ51221 デュアル・モード 5W (WPC と PMA) シングル・チップ・ワイヤレス・パワー・レシーバ BQ51222 デュアル・モード 5W (WPC v1.2 と PMA) シングル・チップ・ワイヤレス・パワー・レシーバ
パッケージ ピン数 ダウンロード
DSBGA (YFP) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ