DDC1128
- Single-Chip Solution to Directly Measure
128 Low-Level Currents - Proven High-Precision, True Integrating
Architecture with 100% Charge Collection - Easy Upgrade for Existing DDC Family
Applications - Low Power: 3 mW/channel at 3 kSPS
- Extremely Linear:
INL = ±0.025% of Reading ±1 ppm of FSR - Low Noise: 6.3 ppm of FSR
- Adjustable Full-Scale Range
- Adjustable Speed
- Data Rates up to 6 kSPS with 20-bit
Performance - Integration Times as low as 160 µs
- Data Rates up to 6 kSPS with 20-bit
- Daisy-Chainable Serial Interface
- In-Package Bypass Capacitors Simplify PCB
Design Area and Design Complexity
The DDC1128 is a 20-bit, 128-channel, current-input analog-to-digital (A/D) converter. It combines both current-to-voltage and A/D conversion so that 128 separate low-level current output devices, such as photodiodes, can be directly connected to its inputs and digitized.
For each of the 128 inputs, the DDC1128 uses the proven dual switched integrator front-end. This configuration allows for continuous current integration: while one integrator is being digitized by the onboard A/D converter, the other is integrating the input current. This architecture provides both a stable offset and a loss-less collection of the input current. Adjustable integration times range from 160µs to 1s, allowing currents from fAs to µAs to be continuously measured with outstanding precision.
The DDC1128 has a serial interface designed for daisy-chaining in multi-device systems. Simply connect the output of one device to the input of the next to create the chain. Common clocking feeds all the devices in the chain so that the digital overhead in a multi-DDC1128 system is minimal.
The DDC1128 operates from a +5 V analog supply and a 2.7 V to 3.6 V digital supply, it is specified from 0°C to 70°C operating temperature and it is available in a 9 × 9 mm2 192-ball BGA, which includes on board bypass capacitors to help minimize the external component requirements and further reduce board space.
To request a full data sheet or other design resources: request DDC1128
詳細
NDA 締結下で、詳細なデータシートやその他の設計リソースを用意しています。ご請求
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | DDC1128 128-Channel, Current-Input Analog-to-Digital Converter データシート (Rev. A) | PDF | HTML | 2016年 5月 27日 | ||
Analog Design Journal | Selecting a multichannel ultra-low-current measurement IC | PDF | HTML | 2022年 3月 18日 | |||
EVM ユーザー ガイド (英語) | DDC1128 EVM Intro User's Guide | 2014年 3月 19日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
DDC1128EVM — 128 チャネル、電流入力、AD コンバータ用 DDC1128 評価モジュール
The DDC1128EVM evaluation module (EVM) is an evaluation kit for evaluating the DDC1128, a 128-channel, current input, 20-bit analog-to-digital (A/D) converter. The EVM consists of two DDC1128 devices, a USB device for interfacing to a PC, an FPGA for device (...)
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
NFBGA (ZKL) | 192 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。