DP83869HM 銅線とファイバのインターフェイス対応、高耐性のギガ ビット・イーサネット PHY | TIJ.co.jp

DP83869HM (供給中) 銅線とファイバのインターフェイス対応、高耐性のギガ ビット・イーサネット PHY

銅線とファイバのインターフェイス対応、高耐性のギガ ビット・イーサネット PHY - DP83869HM
データシート
DP83869HM High Immunity 10/100/1000 Ethernet Physical Layer Transceiver With Copper and Fiber Interface データシート   （英語）
 

概要

The DP83869HM device is a robust, fully-featured Gigabit Physical Layer (PHY) transceiver with integrated PMD sublayers that supports 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols. The DP83869 also supports 1000BASE-X and 100BASE-FX Fiber protocols. Optimized for ESD protection, the DP83869HM exceeds 8-kV IEC 61000-4-2 (direct contact).This device interfaces to the MAC layer through Reduced GMII (RGMII) and SGMII. In 100M mode, the device lets the designer use MII for lower Latency. Programmable integrated termination impedance on RGMII/MII helps reduce system BOM.

The DP83869HM supports Media Conversion in Managed mode. In this mode, the DP83869HM can run 1000BASE-X-to-1000BASE-T and 100BASE-FX-to-100BASE-TX conversions.

The DP83869HM can also support Bridge Conversion from RGMII to SGMII and SGMII to RGMII. The DP83869HM is compliant to TSN standards and offers low latency.

The DP83869HM can also generate IEEE 1588 Sync Frame Detect indications to MAC. This can reduce the jitter in Time Synchronization and help the System account for asymmetric delays in Transmission and Reception of packets.

The standard Ethernet system block diagram is shown on the first page. Designers can also use the DP83869 in Media Convertor mode, in RGMII-to-SGMII Bridge applications, and in SGMII-RGMII Bridge applications.

特長

  • Multiple Operating Modes
    • Media Support: Copper and Fiber
    • Media Conversion Between Copper and Fiber
    • Bridge Between RGMII and SGMII
  • Maximum Ambient Temperature of 125ºC
  • Exceeds 8-kV IEC61000-4-2 ESD
  • Low RGMII Latency
    • Total Latency ≤ 384ns for 1000Base-T
    • Total Latency ≤ 361ns for 100Base-TX
  • Low Power Consumption
    • < 150 mW for 1000Base-X
    • < 500 mW for 1000Base-T
  • Time Sensitive Network (TSN) Compliant
  • Recovered Clock Output for SyncE
  • Selectable Synchronized Clock Output: 25 MHz and 125 MHz
  • 1000Base-X, 100Base-FX Compatible With SFP MSA Specification
  • IEEE1588 Support via SFD
  • Wake On LAN Support
  • Configurable IO Voltages: 1.8 V, 2.5 V, and 3.3 V
  • SGMII, RGMII, MII MAC Interface
  • Jumbo Frame Support for 1000M and 100M Speed
  • Cable Diagnostics
    • TDR
    • BIST
  • Programmable RGMII Termination Impedance
  • Integrated MDI Termination Resistor
  • Fast Link Drop modes
  • Compatible to IEEE 802.3 1000Base-T, 100Base-TX, 10Base-Te,1000Base-X, 100Base-FX

All trademarks are the property of their respective owners.

機能一覧

他の製品と比較 イーサネット PHYs メール Excelへダウンロード
Part number オーダー・オプション Port count Datarate (Mbps) Interface Supply voltage (Volt) IO supply (Typ) (V) Cable length (m) JTAG1149.1 Features Rating Operating temperature range (C) Package Group Package size: mm2:W x L (PKG)
DP83869HM ご注文 Single     10/100/1000     SGMII
RGMII
MII    		 1.1 and 2.5     1.8
2.5
3.3    		 130     Yes     FX support
Media convertor
Bridge mode
Cable diagnostics
JTAG1149.1    		 Catalog     -40 to 125     VQFN | 48     48VQFN: 49 mm2: 7 x 7 (VQFN | 48)