製品詳細

Number of full bridges 2 Vs (min) (V) 8.2 Vs ABS (max) (V) 47 Full-scale current (A) 1.6 Peak output current (A) 1.8 RDS(ON) (HS + LS) (mΩ) 1280 Sleep current (µA) 10 Control mode PH/EN Control interface Hardware (GPIO) Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
Number of full bridges 2 Vs (min) (V) 8.2 Vs ABS (max) (V) 47 Full-scale current (A) 1.6 Peak output current (A) 1.8 RDS(ON) (HS + LS) (mΩ) 1280 Sleep current (µA) 10 Control mode PH/EN Control interface Hardware (GPIO) Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • 8.2-V to 45-V Operating Supply Voltage Range
  • Dual H-Bridge Current-Control Motor Driver
    • Drive Two DC Motors
    • Brake Mode
    • Four Level Winding Current Control
  • 1.6-A Maximum Drive Current at 24 V and TA
    25°C
  • Industry Standard Parallel Digital Control Interface
  • Low Current Sleep Mode
  • Built-In 3.3-V Reference Output
  • Small Package Footprint
  • Protection Features
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • VM Undervoltage Lockout (UVLO)
    • Fault Condition Indication Pin (nFAULT)
  • Thermally Enhanced Surface Mount Package
  • 8.2-V to 45-V Operating Supply Voltage Range
  • Dual H-Bridge Current-Control Motor Driver
    • Drive Two DC Motors
    • Brake Mode
    • Four Level Winding Current Control
  • 1.6-A Maximum Drive Current at 24 V and TA
    25°C
  • Industry Standard Parallel Digital Control Interface
  • Low Current Sleep Mode
  • Built-In 3.3-V Reference Output
  • Small Package Footprint
  • Protection Features
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • VM Undervoltage Lockout (UVLO)
    • Fault Condition Indication Pin (nFAULT)
  • Thermally Enhanced Surface Mount Package

The DRV8802 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and is intended to drive DC motors. The output driver block for each consists of N-channel power MOSFET’s configured as H-bridges to drive the motor windings. The DRV8802 can supply up to 1.6-A peak or 1.1-A RMS output current (with proper heatsinking at 24 V and 25°C) per H-bridge.

A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable to allow braking or coasting of the motor when disabled.

Internal shutdown functions are provided for over current protection, short circuit protection, under voltage lockout and overtemperature.

The DRV8802 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).

The DRV8802 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and is intended to drive DC motors. The output driver block for each consists of N-channel power MOSFET’s configured as H-bridges to drive the motor windings. The DRV8802 can supply up to 1.6-A peak or 1.1-A RMS output current (with proper heatsinking at 24 V and 25°C) per H-bridge.

A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable to allow braking or coasting of the motor when disabled.

Internal shutdown functions are provided for over current protection, short circuit protection, under voltage lockout and overtemperature.

The DRV8802 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
DRV8884 アクティブ 電流レギュレーション機能と 1/16 マイクロステップ機能搭載、37V、1A、バイポーラ・ステッパ・モーター・ドライバ The DRV8884 has integrated microstepping up to 1/16 and Integrated Current Sensing for Stepper Motor applications

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
8 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8802 DC Motor Driver IC データシート (Rev. D) PDF | HTML 2015年 12月 31日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
アプリケーション・ノート Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
ユーザー・ガイド DRV88xx EVM GUI (Rev. C) 2017年 4月 27日
アプリケーション・ノート Understanding Motor Driver Current Ratings 2012年 2月 6日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

DRV8802EVM — DRV8802 評価モジュール

The DRV8802 evaluation module consists of a 1.6A, dual H-bridge motor driver and a small number of external components that can drive up to two brushed DC motors. The on-board MSP430 MCU plus software & GUI provide all the necessary signaling and control. With this EVM, designers can quickly and (...)

ユーザー ガイド: PDF
サポート・ソフトウェア

SLVC342 DRV88xx Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ブラシ付き DC (BDC) モーター・ドライバ
DRV8814 突入電流保護機能搭載、47V、2.5A、デュアル、ブラシ付き DC モーター ドライバ
ステッパ・モーター・ドライバ
DRV8802 電流レギュレーション機能搭載、45V、1.6A、デュアル H ブリッジ・モーター・ドライバ DRV8812 電流レギュレーション機能搭載、45V、1.6A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ DRV8813 電流レギュレーション機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ DRV8824 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、1.6A、バイポーラ・ステッパ・モーター・ドライバ DRV8825 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、2.5A、バイポーラ・ステッパ・モーター・ドライバ DRV8841 電流レギュレーション機能と PWM 制御機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ IC DRV8843 電流レギュレーション機能と PWM 制御機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ
ハードウェア開発
評価ボード
DRV8802EVM DRV8802 評価モジュール DRV8812EVM 評価モジュール、DRV8812 用 DRV8813EVM 評価モジュール、DRV8813 用 DRV8814EVM DRV8814 評価モジュール DRV8824EVM DRV8824 評価モジュール DRV8825EVM 評価モジュール、DRV8825 用 DRV8840EVM 評価モジュール、DRV8840 用 DRV8841EVM 評価モジュール、DRV8841 用 DRV8842EVM 評価モジュール、DRV8842 用
回路図

DRV88xx Hardware (Rev. A)

SLVC583A.ZIP (721 KB)
リファレンス・デザイン

TIDA-00144 — オートモーティブ HVAC ダンパー・モーター制御

TIDA-00144 リファレンス・デザインは、1.6A のデュアル H ブリッジ・モーター・ドライバと、オートモーティブ HVAC ダンパー・モーター・アプリケーションで採用されているブラシ付き DC モーターを最大 2 個駆動できる少数の外部コンポーネントで形成されています。この設計は、45V の最大動作電源電圧に対応します。バッテリの出力に直接接続できるという特長があります。これらに加えて、過電流保護、短絡保護、低電圧ロックアウト、および過熱保護を目的とした、内蔵シャットダウン機能も用意されています。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ