DRV8813

アクティブ

電流レギュレーション機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ

製品詳細

Number of full bridges 2 Vs (min) (V) 8.2 Vs ABS (max) (V) 47 Full-scale current (A) 2.5 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 400 Sleep current (µA) 10 Control mode PH/EN Control interface Hardware (GPIO) Microstepping levels 4 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
Number of full bridges 2 Vs (min) (V) 8.2 Vs ABS (max) (V) 47 Full-scale current (A) 2.5 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 400 Sleep current (µA) 10 Control mode PH/EN Control interface Hardware (GPIO) Microstepping levels 4 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • 8.2-V to 45-V Operating Supply Voltage Range
  • 2.5-A Maximum Drive Current at 24 V and
    TA = 25°C
  • Dual H-Bridge Current Control Motor Driver
    • Drive a Bipolar Stepper or Two DC Motors
    • Four Level Winding Current Control
  • Multiple Decay Modes
    • Mixed Decay
    • Slow Decay
    • Fast Decay
  • Industry Standard Parallel Digital ControlInterface
  • Low Current Sleep Mode
  • Built In 3.3-V ReferenceOutput
  • Small Package and Footprint
  • Protection Features
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • VM Undervoltage Lockout (UVLO)
    • Fault Condition Indication Pin (nFAULT)
  • 8.2-V to 45-V Operating Supply Voltage Range
  • 2.5-A Maximum Drive Current at 24 V and
    TA = 25°C
  • Dual H-Bridge Current Control Motor Driver
    • Drive a Bipolar Stepper or Two DC Motors
    • Four Level Winding Current Control
  • Multiple Decay Modes
    • Mixed Decay
    • Slow Decay
    • Fast Decay
  • Industry Standard Parallel Digital ControlInterface
  • Low Current Sleep Mode
  • Built In 3.3-V ReferenceOutput
  • Small Package and Footprint
  • Protection Features
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • VM Undervoltage Lockout (UVLO)
    • Fault Condition Indication Pin (nFAULT)

The DRV8813 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and can drive a bipolar stepper motor or two DC motors. The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings. The DRV8813 can supply up to 2.5-A peak or 1.75-A RMS output current (with proper heatsinking at 24 V and 25°C).

A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable.

Internal shutdown functions are provided for overcurrent protection, short circuit protection, undervoltage lockout and overtemperature.

The DRV8813 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).

The DRV8813 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and can drive a bipolar stepper motor or two DC motors. The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings. The DRV8813 can supply up to 2.5-A peak or 1.75-A RMS output current (with proper heatsinking at 24 V and 25°C).

A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable.

Internal shutdown functions are provided for overcurrent protection, short circuit protection, undervoltage lockout and overtemperature.

The DRV8813 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
DRV8424E アクティブ 電流センシング機能内蔵、35V、2.5A、バイポーラ ステッパ モーターまたはデュアル ブラシ付きモーターのドライバ DRV8424E is a newer device with integrated current sensing, smart tuning, P2P scalable family & smooth quiet motion
DRV8434E アクティブ 電流センシング機能内蔵、48V、2.5A、バイポーラ ステッパ モーターまたはデュアル ブラシ付きモーターのドライバ DRV8434E is a newer device with integrated current sensing, smart tuning, P2P scalable family, smooth quiet motion

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
12 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8813 Dual-Bridge Motor Controller IC データシート (Rev. E) PDF | HTML 2015年 9月 1日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
アプリケーション・ノート Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
アプリケーション・ノート High Resolution Microstepping Driver With the DRV88xx Series (Rev. A) PDF | HTML 2020年 12月 21日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
ユーザー・ガイド DRV88xx EVM GUI (Rev. C) 2017年 4月 27日
その他の技術資料 TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
アプリケーション・ノート Optimizing High-Level Micro Stepping of the DRV88xx Driver 2014年 7月 19日
アプリケーション・ノート Understanding Motor Driver Current Ratings 2012年 2月 6日
セレクション・ガイド モーター・ドライバ DRV88xx ファミリー 2010年 11月 19日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

DRV8813EVM — 評価モジュール、DRV8813 用

The DRV8813 evaluation module consists of a 2.5A, dual-H-bridge motor driver with a Phase/Enable control interface and a small number external components that can be used to drive a single bipolar stepper motor. The on-board MSP430 MCU + software/GUI provides signaling and control and supports up (...)

ユーザー ガイド: PDF
サポート・ソフトウェア

SLVC342 DRV88xx Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ブラシ付き DC (BDC) モーター・ドライバ
DRV8814 突入電流保護機能搭載、47V、2.5A、デュアル、ブラシ付き DC モーター ドライバ
ステッパ・モーター・ドライバ
DRV8802 電流レギュレーション機能搭載、45V、1.6A、デュアル H ブリッジ・モーター・ドライバ DRV8812 電流レギュレーション機能搭載、45V、1.6A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ DRV8813 電流レギュレーション機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ DRV8824 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、1.6A、バイポーラ・ステッパ・モーター・ドライバ DRV8825 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、2.5A、バイポーラ・ステッパ・モーター・ドライバ DRV8841 電流レギュレーション機能と PWM 制御機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ IC DRV8843 電流レギュレーション機能と PWM 制御機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ
ハードウェア開発
評価ボード
DRV8802EVM DRV8802 評価モジュール DRV8812EVM 評価モジュール、DRV8812 用 DRV8813EVM 評価モジュール、DRV8813 用 DRV8814EVM DRV8814 評価モジュール DRV8824EVM DRV8824 評価モジュール DRV8825EVM 評価モジュール、DRV8825 用 DRV8840EVM 評価モジュール、DRV8840 用 DRV8841EVM 評価モジュール、DRV8841 用 DRV8842EVM 評価モジュール、DRV8842 用
回路図

DRV88xx Hardware (Rev. A)

SLVC583A.ZIP (721 KB)
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ