DRV8818

アクティブ

電流レギュレーション機能と 1/8 マイクロステップ機能搭載、35V、2.5A、バイポーラ・ステッパ・モーター・ドライバ

製品詳細

Number of full bridges 2 Vs (min) (V) 8 Vs ABS (max) (V) 35 Full-scale current (A) 2.5 Peak output current (A) 3.5 RDS(ON) (HS + LS) (mΩ) 370 Sleep current (µA) 3 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 8 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
Number of full bridges 2 Vs (min) (V) 8 Vs ABS (max) (V) 35 Full-scale current (A) 2.5 Peak output current (A) 3.5 RDS(ON) (HS + LS) (mΩ) 370 Sleep current (µA) 3 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 8 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • Pulse Width Modulation (PWM) Microstepping Motor Driver
    • Built-In Microstepping Indexer
    • Up to 8 Microsteps/Step
    • Step and Direction Control
    • Programmable Mixed Decay, Blanking, and Off Time
  • Up to 2.5-A Current Per Winding
  • Low 0.37-Ω (HS + LS) MOSFET RDS(ON) (25°C)
  • 8-V to 35-V Operating Supply Voltage Range
  • Pin to Pin Upgrade for DRV8811 With Lower RDS(ON)
  • Thermally-Enhanced Surface Mount Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
  • Pulse Width Modulation (PWM) Microstepping Motor Driver
    • Built-In Microstepping Indexer
    • Up to 8 Microsteps/Step
    • Step and Direction Control
    • Programmable Mixed Decay, Blanking, and Off Time
  • Up to 2.5-A Current Per Winding
  • Low 0.37-Ω (HS + LS) MOSFET RDS(ON) (25°C)
  • 8-V to 35-V Operating Supply Voltage Range
  • Pin to Pin Upgrade for DRV8811 With Lower RDS(ON)
  • Thermally-Enhanced Surface Mount Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)

The DRV8818 provides an integrated stepper motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, as well as microstepping indexer logic to control a stepper motor.

The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings.

A simple STEP/DIRECTION interface allows easy interfacing to controller circuits. The mode pins allow for configuration of the motor in full-step, half-step, quarter-step, or eighth-step modes. Decay mode and PWM off time are programmable.

Internal shutdown functions are provided for over current protection, short circuit protection, under-voltage lockout and overtemperature.

The DRV8818 is packaged in a 28-pin HTSSOP package with PowerPAD.

The DRV8818 provides an integrated stepper motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, as well as microstepping indexer logic to control a stepper motor.

The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings.

A simple STEP/DIRECTION interface allows easy interfacing to controller circuits. The mode pins allow for configuration of the motor in full-step, half-step, quarter-step, or eighth-step modes. Decay mode and PWM off time are programmable.

Internal shutdown functions are provided for over current protection, short circuit protection, under-voltage lockout and overtemperature.

The DRV8818 is packaged in a 28-pin HTSSOP package with PowerPAD.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
DRV8424 アクティブ 統合型電流センシング機能および 1/256 マイクロステップ機能搭載、35V、2.5A バイポーラ・ステッパ・ドライバ DRV8424 is a newer device with integrated current sensing, smart tuning, high microstepping, P2P scalable family & smooth quiet motion
DRV8434 アクティブ 電流センシング機能と 1/256 マイクロステップ機能内蔵、48V、2.5A、バイポーラ ステッパ モーター ドライバ DRV8434 is a newer device with integrated current sensing, smart tuning, P2P scalable family and smooth quiet motion
比較対象デバイスと類似の機能
DRV8886 アクティブ 電流センシング機能と 1/16 マイクロステップ機能を統合した、37V、2A のバイポーラ・ステッパ・モーター・ドライバ The DRV8886 includes Integrated Current Sensing for 24V applications

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
13 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8818 Stepper Motor Controller IC データシート (Rev. E) PDF | HTML 2016年 1月 19日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
アプリケーション・ノート Current Recirculation and Decay Modes (Rev. A) PDF | HTML 2021年 4月 20日
アプリケーション・ノート Intelligent Stepper Motor Driver (Rev. B) PDF | HTML 2021年 1月 20日
アプリケーション・ノート Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
アプリケーション・ノート High Resolution Microstepping Driver With the DRV88xx Series (Rev. A) PDF | HTML 2020年 12月 21日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
EVM ユーザー ガイド (英語) DRV8818 EVM GUI (Rev. A) 2017年 4月 27日
その他の技術資料 TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
Analog Design Journal Applying acceleration and deceleration profiles to bipolar stepper motors 2012年 7月 17日
アプリケーション・ノート Understanding Motor Driver Current Ratings 2012年 2月 6日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

DRV8818EVM — DRV8818 評価モジュール

The DRV8818 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8818 integrated micro-stepping motor driver from Texas Instruments. This EVM comes with an on-board MSP430 microprocessor which has been pre-programmed for standalone operation. The regulated voltage for the (...)

ユーザー ガイド: PDF
サポート・ソフトウェア

SLVC415 DRV8818 Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ステッパ・モーター・ドライバ
DRV8818 電流レギュレーション機能と 1/8 マイクロステップ機能搭載、35V、2.5A、バイポーラ・ステッパ・モーター・ドライバ
ハードウェア開発
評価ボード
DRV8818EVM DRV8818 評価モジュール
回路図

Hardware: DRV8818EVM

SLVC588.ZIP (1447 KB)
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ