DRV8825

アクティブ

電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、2.5A、バイポーラ・ステッパ・モーター・ドライバ

製品詳細

Number of full bridges 2 Vs (min) (V) 8.2 Vs ABS (max) (V) 47 Full-scale current (A) 2.5 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 400 Sleep current (µA) 10 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 32 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
Number of full bridges 2 Vs (min) (V) 8.2 Vs ABS (max) (V) 47 Full-scale current (A) 2.5 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 400 Sleep current (µA) 10 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 32 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • PWM Microstepping Stepper Motor Driver
    • Built-In Microstepping Indexer
    • Up to 1/32 Microstepping
  • Multiple Decay Modes
    • Mixed Decay
    • Slow Decay
    • Fast Decay
  • 8.2-V to 45-V Operating Supply Voltage Range
  • 2.5-A Maximum Drive Current at 24 V and
    TA = 25°C
  • Simple STEP/DIR Interface
  • Low Current Sleep Mode
  • Built-In 3.3-V Reference Output
  • Small Package and Footprint
  • Protection Features
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • VM Undervoltage Lockout (UVLO)
    • Fault Condition Indication Pin (nFAULT)
  • APPLICATIONS
    • Automatic Teller Machines
    • Money Handling Machines
    • Video Security Cameras
    • Printers
    • Scanners
    • Office Automation Machines
    • Gaming Machines
    • Factory Automation
    • Robotics

  • PWM Microstepping Stepper Motor Driver
    • Built-In Microstepping Indexer
    • Up to 1/32 Microstepping
  • Multiple Decay Modes
    • Mixed Decay
    • Slow Decay
    • Fast Decay
  • 8.2-V to 45-V Operating Supply Voltage Range
  • 2.5-A Maximum Drive Current at 24 V and
    TA = 25°C
  • Simple STEP/DIR Interface
  • Low Current Sleep Mode
  • Built-In 3.3-V Reference Output
  • Small Package and Footprint
  • Protection Features
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • VM Undervoltage Lockout (UVLO)
    • Fault Condition Indication Pin (nFAULT)
  • APPLICATIONS
    • Automatic Teller Machines
    • Money Handling Machines
    • Video Security Cameras
    • Printers
    • Scanners
    • Office Automation Machines
    • Gaming Machines
    • Factory Automation
    • Robotics

The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver block consists of N-channel power MOSFET’s configured as full H-bridges to drive the motor windings. The DRV8825 is capable of driving up to 2.5 A of current from each output (with proper heat sinking, at 24 V and 25°C).

A simple STEP/DIR interface allows easy interfacing to controller circuits. Mode pins allow for configuration of the motor in full-step up to 1/32-step modes. Decay mode is configurable so that slow decay, fast decay, or mixed decay can be used. A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.

Internal shutdown functions are provided for overcurrent, short circuit, under voltage lockout and over temperature. Fault conditions are indicated via the nFAULT pin.

The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers and a microstepping indexer, and is intended to drive a bipolar stepper motor. The output driver block consists of N-channel power MOSFET’s configured as full H-bridges to drive the motor windings. The DRV8825 is capable of driving up to 2.5 A of current from each output (with proper heat sinking, at 24 V and 25°C).

A simple STEP/DIR interface allows easy interfacing to controller circuits. Mode pins allow for configuration of the motor in full-step up to 1/32-step modes. Decay mode is configurable so that slow decay, fast decay, or mixed decay can be used. A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.

Internal shutdown functions are provided for overcurrent, short circuit, under voltage lockout and over temperature. Fault conditions are indicated via the nFAULT pin.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
DRV8424 アクティブ 統合型電流センシング機能および 1/256 マイクロステップ機能搭載、35V、2.5A バイポーラ・ステッパ・ドライバ DRV8424 is a newer device with integrated current sensing, smart tuning, high microstepping, P2P scalable family and smooth quiet motion
DRV8434 アクティブ 電流センシング機能と 1/256 マイクロステップ機能内蔵、48V、2.5A、バイポーラ ステッパ モーター ドライバ DRV8424 is a newer device with integrated current sensing, smart tuning, high microstepping, P2P scalable family and smooth quiet motion
比較対象デバイスと類似の機能
DRV8886AT アクティブ 電流センシング機能とスマート・チューニング・テクノロジーを統合した、37V、2A のバイポーラ・ステッパ・モーター・ドライバ The DRV8886AT has integrated microstepping up to 1/16, integrated current sensing and adaptive decay mode

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
11 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8825 Stepper Motor Controller IC データシート (Rev. F) PDF | HTML 2014年 7月 24日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
アプリケーション・ノート Intelligent Stepper Motor Driver (Rev. B) PDF | HTML 2021年 1月 20日
アプリケーション・ノート Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
ユーザー・ガイド DRV88xx EVM GUI (Rev. C) 2017年 4月 27日
その他の技術資料 TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
Analog Design Journal Applying acceleration and deceleration profiles to bipolar stepper motors 2012年 7月 17日
セレクション・ガイド モーター・ドライバ DRV88xx ファミリー 2010年 11月 19日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

DRV8825EVM — 評価モジュール、DRV8825 用

The DRV8825 evaluation module consists of a 2.5A, dual-H-bridge motor driver with on chip indexer (step/dir control interface) supporting up to 32 micro steps and a small number external components that can be used to drive a single bipolar stepper motor. The on-board MSP430 MCU + software/GUI (...)

ユーザー ガイド: PDF
サポート・ソフトウェア

SLVC342 DRV88xx Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ブラシ付き DC (BDC) モーター・ドライバ
DRV8814 突入電流保護機能搭載、47V、2.5A、デュアル、ブラシ付き DC モーター ドライバ
ステッパ・モーター・ドライバ
DRV8802 電流レギュレーション機能搭載、45V、1.6A、デュアル H ブリッジ・モーター・ドライバ DRV8812 電流レギュレーション機能搭載、45V、1.6A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ DRV8813 電流レギュレーション機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ DRV8824 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、1.6A、バイポーラ・ステッパ・モーター・ドライバ DRV8825 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、2.5A、バイポーラ・ステッパ・モーター・ドライバ DRV8841 電流レギュレーション機能と PWM 制御機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ IC DRV8843 電流レギュレーション機能と PWM 制御機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ
ハードウェア開発
評価ボード
DRV8802EVM DRV8802 評価モジュール DRV8812EVM 評価モジュール、DRV8812 用 DRV8813EVM 評価モジュール、DRV8813 用 DRV8814EVM DRV8814 評価モジュール DRV8824EVM DRV8824 評価モジュール DRV8825EVM 評価モジュール、DRV8825 用 DRV8840EVM 評価モジュール、DRV8840 用 DRV8841EVM 評価モジュール、DRV8841 用 DRV8842EVM 評価モジュール、DRV8842 用
サポート・ソフトウェア

SLVC502 Software: DRV8824EVM and DRV8825EVM

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ステッパ・モーター・ドライバ
DRV8824 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、1.6A、バイポーラ・ステッパ・モーター・ドライバ DRV8825 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、2.5A、バイポーラ・ステッパ・モーター・ドライバ
ハードウェア開発
評価ボード
DRV8824EVM DRV8824 評価モジュール DRV8825EVM 評価モジュール、DRV8825 用
リファレンス・デザイン

TIDA-00293 — DLP® テクノロジを使用する、ベスト・イン・クラスのステレオリソグラフィ 3D プリンタ

DLP® 3D プリンタを示すこのリファレンス・デザインで、TI の DLP 3D 構造化光ソフトウェア開発キット (SDK) を使用して、クラス最高解像度の 3D オブジェクトを製作できます。DLP テクノロジーは、高精度の高速 3D プリントにステレオ・リソグラフィー技術を使用しており、高度に差別化した製品の開発に役立ちます。このリファレンス・デザインは、DLP LightCrafter™ 4500 評価基板 (EVM) を採用しているので、物体の複数のレイヤーを高精度で露光する DLP® 0.45 インチ WXGA チップセットの性能を提示できます。このデザインはまた、TI (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

TIDM-PRINTERPACK — 40 ピン・ブースタパック、3D プリンタ制御用

This design is a 40-pin boosterpack which incorporates all of the necessary components for 3D printer operation. Convenient location of all I/O headers and inclusion of firmware allows developers to immediately start creating their own cost-effective 3D printers.  Although the original (...)
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ