The DRV8835 provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications. The device has two H-bridge drivers, and drives two DC motors or one stepper motor, as well as other devices like solenoids. The output driver block for each consists of N-channel power MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates gate drive voltages.
The DRV8835 supplies up to 1.5-A of output current per H-bridge and operates on a motor power supply voltage from 0 V to 11 V, and a device power supply voltage of 2 V to 7 V.
PHASE/ENABLE and IN/IN interfaces are compatible with industry-standard devices.
Internal shutdown functions are provided for overcurrent protection, short circuit protection, undervoltage lockout, and overtemperature.
The DRV8835 is packaged in a tiny 12-pin WSON package (Eco-friendly: RoHS and no Sb/Br).
For all available packages, see the orderable addendum at the end of the data sheet.All trademarks are the property of their respective owners.
Vs (Min) (V) |
Vs (Max) (V) |
Peak output current (A) |
Number of half bridges |
Control I/F |
RDS(ON) (HS + LS) (mOhms) |
Rating |
Operating temperature range (C) |
Package Group |
Package size: mm2:W x L (PKG) |
Approx. price (US$) |
DRV8835 |
---|
2 |
11 |
1.5 |
4 |
PWM PH/EN |
305 |
Catalog |
-40 to 85 |
WSON | 12 |
See datasheet (WSON) |
0.70 | 1ku |
ご注文 |