DRV8843

アクティブ

電流レギュレーション機能と PWM 制御機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ

製品詳細

Number of full bridges 2 Vs (min) (V) 8.2 Vs ABS (max) (V) 47 Full-scale current (A) 2.5 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 400 Sleep current (µA) 10 Control mode PWM Control interface Hardware (GPIO) Microstepping levels 4 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
Number of full bridges 2 Vs (min) (V) 8.2 Vs ABS (max) (V) 47 Full-scale current (A) 2.5 Peak output current (A) 3 RDS(ON) (HS + LS) (mΩ) 400 Sleep current (µA) 10 Control mode PWM Control interface Hardware (GPIO) Microstepping levels 4 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • Dual H-Bridge Motor Driver
    • Single/Dual Brushed DC
    • Stepper
  • IN/IN Control Interface
  • Optional Fixed Frequency Current Regulation
    • Two Bit Current control Allows Up to
      Four Current Levels
  • Low MOSFET On-Resistance
    • 2.5-A Maximum Drive Current at 24 V
      and TA = 25°C
    • Combined 400 mΩ RDS(ON) of High-Side
      and Low-Side at 24 V and TA = 25°C
  • 8.2-V to 45-V Operating Supply Voltage Range
  • Low Current Sleep Mode
  • Built-In 3.3-V Reference Output
  • Thermally Enhanced Surface Mount Package
  • Protection Features
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • Undervoltage Lockout (UVLO)
    • Fault Condition Indication Pin (nFAULT)
  • Dual H-Bridge Motor Driver
    • Single/Dual Brushed DC
    • Stepper
  • IN/IN Control Interface
  • Optional Fixed Frequency Current Regulation
    • Two Bit Current control Allows Up to
      Four Current Levels
  • Low MOSFET On-Resistance
    • 2.5-A Maximum Drive Current at 24 V
      and TA = 25°C
    • Combined 400 mΩ RDS(ON) of High-Side
      and Low-Side at 24 V and TA = 25°C
  • 8.2-V to 45-V Operating Supply Voltage Range
  • Low Current Sleep Mode
  • Built-In 3.3-V Reference Output
  • Thermally Enhanced Surface Mount Package
  • Protection Features
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • Undervoltage Lockout (UVLO)
    • Fault Condition Indication Pin (nFAULT)

The DRV8843 provides an integrated dual H-bridge motor driver solution for printers, scanners, and other automated equipment applications. The device can be used to drive one or two brushed DC motors, a bipolar stepper motor, or other loads. A simple PWM interface allows easy interfacing to controller circuits.

The output driver block consists of N-channel power MOSFETs configured as H-bridges. The DRV8843 an supply up to 2.5-A peak or 1.75-A RMS output current (with proper heat sinking at 24 V and TA = 25°C) per H-bridge.

A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.

Internal protection features are provided for overtemperature, overcurrent, and undervoltage. Fault conditions are indicated by a nFAULT pin.

The DRV8843 provides an integrated dual H-bridge motor driver solution for printers, scanners, and other automated equipment applications. The device can be used to drive one or two brushed DC motors, a bipolar stepper motor, or other loads. A simple PWM interface allows easy interfacing to controller circuits.

The output driver block consists of N-channel power MOSFETs configured as H-bridges. The DRV8843 an supply up to 2.5-A peak or 1.75-A RMS output current (with proper heat sinking at 24 V and TA = 25°C) per H-bridge.

A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.

Internal protection features are provided for overtemperature, overcurrent, and undervoltage. Fault conditions are indicated by a nFAULT pin.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
DRV8424E アクティブ 電流センシング機能内蔵、35V、2.5A、バイポーラ ステッパ モーターまたはデュアル ブラシ付きモーターのドライバ Lower voltage support and higher current capabilities
DRV8425E アクティブ 統合型電流センシング機能搭載、35V、2A、バイポーラ・ステッパまたはデュアル・ブラシ付きモーターのドライバ Lower voltage support
DRV8434E アクティブ 電流センシング機能内蔵、48V、2.5A、バイポーラ ステッパ モーターまたはデュアル ブラシ付きモーターのドライバ Higher voltage support and higher current capabilities
比較対象デバイスと類似の機能
DRV8886AT アクティブ 電流センシング機能とスマート・チューニング・テクノロジーを統合した、37V、2A のバイポーラ・ステッパ・モーター・ドライバ The DRV8886AT has integrated microstepping up to 1/16, Integrated Current Sensing, and adaptive decay mode for Stepper Motor applications

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
10 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8843 Dual H-Bridge Driver データシート (Rev. D) PDF | HTML 2015年 11月 30日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
アプリケーション・ノート Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
ユーザー・ガイド DRV88xx EVM GUI (Rev. C) 2017年 4月 27日
その他の技術資料 TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
アプリケーション・ノート Optimizing High-Level Micro Stepping of the DRV88xx Driver 2014年 7月 19日
アプリケーション・ノート Understanding Motor Driver Current Ratings 2012年 2月 6日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

サポート・ソフトウェア

SLVC342 DRV88xx Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ブラシ付き DC (BDC) モーター・ドライバ
DRV8814 突入電流保護機能搭載、47V、2.5A、デュアル、ブラシ付き DC モーター ドライバ
ステッパ・モーター・ドライバ
DRV8802 電流レギュレーション機能搭載、45V、1.6A、デュアル H ブリッジ・モーター・ドライバ DRV8812 電流レギュレーション機能搭載、45V、1.6A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ DRV8813 電流レギュレーション機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ DRV8824 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、1.6A、バイポーラ・ステッパ・モーター・ドライバ DRV8825 電流レギュレーション機能と 1/32 マイクロステップ機能搭載、45V、2.5A、バイポーラ・ステッパ・モーター・ドライバ DRV8841 電流レギュレーション機能と PWM 制御機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ IC DRV8843 電流レギュレーション機能と PWM 制御機能搭載、45V、2.5A、バイポーラ・ステッパまたはデュアル H ブリッジ・モーター・ドライバ
ハードウェア開発
評価ボード
DRV8802EVM DRV8802 評価モジュール DRV8812EVM 評価モジュール、DRV8812 用 DRV8813EVM 評価モジュール、DRV8813 用 DRV8814EVM DRV8814 評価モジュール DRV8824EVM DRV8824 評価モジュール DRV8825EVM 評価モジュール、DRV8825 用 DRV8840EVM 評価モジュール、DRV8840 用 DRV8841EVM 評価モジュール、DRV8841 用 DRV8842EVM 評価モジュール、DRV8842 用
回路図

DRV88xx Hardware (Rev. A)

SLVC583A.ZIP (721 KB)
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ