DRV8844

アクティブ

バイポーラ (±30V) 電源と独立型 1/2 ブリッジ制御機能搭載、60V、2.5A、デュアル H ブリッジ・モーター・ドライバ

製品詳細

Number of full bridges 2 Vs (min) (V) 8 Vs ABS (max) (V) 65 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 480 Sleep current (µA) 500 Control mode Independent 1/2-Bridge, PWM Control interface Hardware (GPIO) Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 2 Vs (min) (V) 8 Vs ABS (max) (V) 65 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 480 Sleep current (µA) 500 Control mode Independent 1/2-Bridge, PWM Control interface Hardware (GPIO) Rating Catalog Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • Quad 1/2-H-Bridge DC Motor Driver
    • Can Drive Four Solenoids, Two DC Motors, One Stepper Motor, or Other Loads
    • Full Individual Half Bridge Control
    • Low MOSFET On-Resistance
  • 2.5-A Maximum Drive Current at 24 V, 25°C
  • Floating Input Buffers Allow Dual (Bipolar) Supplies (up to ±30 V)
  • Built-In 3.3-V, 10-mA LDO Regulator
  • Industry Standard IN/IN Digital Control Interface
  • 8-V to 60-V Operating Supply Voltage Range
  • Outputs Can Be Connected in Parallel
  • Thermally Enhanced Surface Mount Package

All trademarks are the property of their respective owners.

  • Quad 1/2-H-Bridge DC Motor Driver
    • Can Drive Four Solenoids, Two DC Motors, One Stepper Motor, or Other Loads
    • Full Individual Half Bridge Control
    • Low MOSFET On-Resistance
  • 2.5-A Maximum Drive Current at 24 V, 25°C
  • Floating Input Buffers Allow Dual (Bipolar) Supplies (up to ±30 V)
  • Built-In 3.3-V, 10-mA LDO Regulator
  • Industry Standard IN/IN Digital Control Interface
  • 8-V to 60-V Operating Supply Voltage Range
  • Outputs Can Be Connected in Parallel
  • Thermally Enhanced Surface Mount Package

All trademarks are the property of their respective owners.

The DRV8844 provides four individually controllable 1/2-H-bridge drivers. It can be used to drive two DC motors, one stepper motor, four solenoids, or other loads. The output driver channel for each channel consists of N-channel power MOSFET’s configured in a 1/2-H-bridge configuration.

The DRV8844 can supply up to 2.5-A peak or 1.75-A RMS output current per channel (with proper PCB heatsinking at 24 V and 25°C) per H-bridge.

Separate inputs to independently control each 1/2-H-bridge are provided. To allow operation with split supplies, the logic inputs and nFAULT output are referenced to a separate floating ground pin.

Internal shutdown functions are provided for over current protection, short circuit protection, undervoltage lockout, and overtemperature.

The DRV8844 is available in a 28-pin HTSSOP package with PowerPAD (Eco-friendly: RoHS & no Sb/Br).

For all available packages, see the orderable addendum at the end of the data sheet.

The DRV8844 provides four individually controllable 1/2-H-bridge drivers. It can be used to drive two DC motors, one stepper motor, four solenoids, or other loads. The output driver channel for each channel consists of N-channel power MOSFET’s configured in a 1/2-H-bridge configuration.

The DRV8844 can supply up to 2.5-A peak or 1.75-A RMS output current per channel (with proper PCB heatsinking at 24 V and 25°C) per H-bridge.

Separate inputs to independently control each 1/2-H-bridge are provided. To allow operation with split supplies, the logic inputs and nFAULT output are referenced to a separate floating ground pin.

Internal shutdown functions are provided for over current protection, short circuit protection, undervoltage lockout, and overtemperature.

The DRV8844 is available in a 28-pin HTSSOP package with PowerPAD (Eco-friendly: RoHS & no Sb/Br).

For all available packages, see the orderable addendum at the end of the data sheet.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
DRV8932 アクティブ 電流センス機能搭載、35V、1A、クワッド、独立ハーフブリッジ ドライバ 35V, 1.5A Quad Half Bridge driver with integrated current sense
DRV8955 アクティブ 電流センス機能搭載、50V、2.5A、クワッド、ハーフ・ブリッジ・ドライバ 60V, 2.5A dual H Bridge driver with independent half bridge control

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
10 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8844 Quad ½-H-Bridge Driver IC データシート (Rev. D) PDF | HTML 2016年 5月 4日
アプリケーション・ノート How to Drive Unipolar Stepper Motor with the DRV8xxx PDF | HTML 2021年 12月 3日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
アプリケーション・ノート Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
その他の技術資料 TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
EVM ユーザー ガイド (英語) DRV8844EVM Users Guide 2012年 8月 1日
アプリケーション・ノート Understanding Motor Driver Current Ratings 2012年 2月 6日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

DRV8844EVM — DRV8844 評価モジュール

The DRV8844 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8844 motor driver from Texas Instruments.
ユーザー ガイド: PDF
サポート・ソフトウェア

SLVC445 DRV8844 Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ブラシ付き DC (BDC) モーター・ドライバ
DRV8844 バイポーラ (±30V) 電源と独立型 1/2 ブリッジ制御機能搭載、60V、2.5A、デュアル H ブリッジ・モーター・ドライバ
ハードウェア開発
評価ボード
DRV8844EVM DRV8844 評価モジュール
回路図

Hardware: DRV8844EVM

SLVC592.ZIP (1083 KB)
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ