製品詳細

Number of full bridges 2 Vs (min) (V) 4 Vs ABS (max) (V) 20 Full-scale current (A) 1 Peak output current (A) 2 RDS(ON) (HS + LS) (mΩ) 900 Sleep current (µA) 3 Control mode Independent 1/2-Bridge, PWM Control interface Hardware (GPIO) Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
Number of full bridges 2 Vs (min) (V) 4 Vs ABS (max) (V) 20 Full-scale current (A) 1 Peak output current (A) 2 RDS(ON) (HS + LS) (mΩ) 900 Sleep current (µA) 3 Control mode Independent 1/2-Bridge, PWM Control interface Hardware (GPIO) Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 16 32 mm² 5 x 6.4
  • Dual H-Bridge Motor Driver
    • Single/Dual Brushed DC
    • Stepper
  • PWM Control Interface
  • Optional Current Regulation With 20-µs Fixed Off-
    Time
  • High Output Current per H-Bridge
    • 2-A Maximum Driver Current at 12 V and
      TA = 25°C
    • Parallel Mode Available Capable of 4-A
      Maximum Driver Current at 12 V and
      TA = 25°C
  • 4- to 18-V Operating Supply Voltage Range
  • Low-Current 3-µA Sleep Mode
  • Thermally-Enhanced Surface Mount Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • Fault Condition Indication Pin (nFAULT)
  • Dual H-Bridge Motor Driver
    • Single/Dual Brushed DC
    • Stepper
  • PWM Control Interface
  • Optional Current Regulation With 20-µs Fixed Off-
    Time
  • High Output Current per H-Bridge
    • 2-A Maximum Driver Current at 12 V and
      TA = 25°C
    • Parallel Mode Available Capable of 4-A
      Maximum Driver Current at 12 V and
      TA = 25°C
  • 4- to 18-V Operating Supply Voltage Range
  • Low-Current 3-µA Sleep Mode
  • Thermally-Enhanced Surface Mount Package
  • Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Thermal Shutdown (TSD)
    • Fault Condition Indication Pin (nFAULT)

The DRV8848 provides a dual H-bridge motor driver for home appliances and other mechatronic applications. The device can be used to drive one or two DC motors, a bipolar stepper motor, or other loads. A simple PWM interface allows easy interfacing to controller circuits.

The output block of each H-bridge driver consists of N-channel and P-channel power MOSFETs configured as full H-bridges to drive the motor windings. Each H-bridge includes circuitry to regulate the winding current using a fixed off-time chopping scheme. The DRV8848 is capable of driving up to 2 A of current from each output or 4 A of current in parallel mode (with proper heat sinking, at 12 V and TA = 25°C).

A low-power sleep mode is provided, which shuts down internal circuitry to achieve very-low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.

Internal protection functions are provided for UVLO, OCP, short-circuit protection, and overtemperature. Fault conditions are indicated by a nFAULT pin.

The DRV8848 provides a dual H-bridge motor driver for home appliances and other mechatronic applications. The device can be used to drive one or two DC motors, a bipolar stepper motor, or other loads. A simple PWM interface allows easy interfacing to controller circuits.

The output block of each H-bridge driver consists of N-channel and P-channel power MOSFETs configured as full H-bridges to drive the motor windings. Each H-bridge includes circuitry to regulate the winding current using a fixed off-time chopping scheme. The DRV8848 is capable of driving up to 2 A of current from each output or 4 A of current in parallel mode (with proper heat sinking, at 12 V and TA = 25°C).

A low-power sleep mode is provided, which shuts down internal circuitry to achieve very-low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.

Internal protection functions are provided for UVLO, OCP, short-circuit protection, and overtemperature. Fault conditions are indicated by a nFAULT pin.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
DRV8847 アクティブ 電流レギュレーション機能と独立したハーフ・ブリッジ制御機能搭載、18V、2A デュアル H ブリッジ・モーター・ドライバ The DRV8847 has interface (2 GPIO) options available, and open-load detection
比較対象デバイスと類似の機能
DRV8220 アクティブ 自動スリープ・モード搭載、20V、1.76A、H ブリッジ・モーター・ドライバ 18V, optimized for single H-bridge applications, automatic sleep mode

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
9 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8848 Dual H-Bridge Motor Driver データシート (Rev. A) PDF | HTML 2015年 11月 4日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
EVM ユーザー ガイド (英語) DRV8848 EVM GUI (Rev. C) 2019年 9月 10日
技術記事 Using smart relay drivers for smart meters, part 2 PDF | HTML 2018年 12月 10日
アプリケーション概要 Small Motors in Large Appliances 2018年 7月 20日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
アプリケーション・ノート Using a Motor Driver DRV8848 for Low-Power Isolated Full-Bridge DC-DC Conversion 2017年 11月 13日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

BOOST-DRV8848 — デュアル・ブラシ付き DC モーター BoosterPack、DRV8848 機能付き

BOOST-DRV8848 は、デュアル H ブリッジ・モーター・ドライバである DRV8848 をベースとする、4 ~ 18V のブラシ付き DC モーター・ドライブ段です。このリファレンス・デザインは、シングルまたはデュアルのブラシ付き DC モーターを駆動するために必要なすべての機能を搭載しており、大電流ニーズに対応するための並列モードもサポートしています。BOOST-DRV8848 は、ブラシ付き DC モーター・ドライブ段の設計法を学ぶのに最適です。このキットは、LaunchPad 標準のピン配置に従うすべての TI LaunchPad (...)

ユーザー ガイド: PDF
評価ボード

DRV8848EVM — DRV8848EVM ステッピング・モーター用評価モジュール

The DRV8848EVM (evaluation module) serves as a user-friendly evaluation kit to demonstrate TI's brushed motor driver DRV8848. A MSP430F2617 is used to control the speed of the motor and current levels.  The EVM is a high-performance, power-efficient, cost-effective platform that speeds (...)

ユーザー ガイド: PDF
サポート・ソフトウェア

SLLC450 DRV8848 Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ステッパ・モーター・ドライバ
DRV8848 電流レギュレーション機能搭載、18V、2A、デュアル H ブリッジ・モーター・ドライバ
ハードウェア開発
評価ボード
DRV8848EVM DRV8848EVM ステッピング・モーター用評価モジュール
リファレンス・デザイン

TIDA-00297 — 冷蔵庫ダンパおよびファン・モーター制御ソリューション

冷蔵庫は多くの場合、ダンパーを使用してエアフローを制御し、ファンを使用して空気循環を実施します。長年にわたってディスクリート・ソリューションが使用されてきましたが、このリファレンス・デザインは統合型のモーター・ドライバを採用し、容易な制御、高性能、包括的な保護を実現します。DRV8848 はステッパ・モーター・ダンパーを駆動し、DRV10983 は可聴ノイズの小さい 180° 整流を実施して BLDC (ブラシレス直流) ファンを駆動します。この BLDC は閉ループ速度制御も採用しており、MSP430G2553 と DRV8812 を使用して PWM ベースの電源に対応しています。 (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 16 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ