DRV8880

アクティブ

電流レギュレーション機能と 1/16 マイクロステップ機能とスマート・チューニング機能搭載、45V、2A、バイポーラ・ステッパ・モーター・ドライバ

製品詳細

Number of full bridges 2 Vs (min) (V) 6.5 Vs ABS (max) (V) 50 Full-scale current (A) 2 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 630 Sleep current (µA) 28 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 16 Features Current Regulation, Smart Tune Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 2 Vs (min) (V) 6.5 Vs ABS (max) (V) 50 Full-scale current (A) 2 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 630 Sleep current (µA) 28 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 16 Features Current Regulation, Smart Tune Rating Catalog Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4 WQFN (RHR) 28 19.25 mm² 5.5 x 3.5
  • Microstepping Stepper Motor Driver
    • STEP/DIR Interface
    • Up to 1/16 Microstepping Indexer
    • Non-Circular and Standard ½ Step Modes
  • 6.5- to 45-V Operating Supply Voltage Range
  • Multiple Decay Modes to Support Any Motor
    • Smart tune
    • Mixed Decay
    • Slow Decay
    • Fast Decay
  • Adaptive Blanking Time for Smooth Stepping
  • Configurable Off-Time PWM Chopping
    • 10-, 20-, or 30-µs Off-Time
  • 3.3-V, 10-mA LDO Regulator
  • Low-Current Sleep Mode (28 µA)
  • Small Package and Footprint
    • 28 HTSSOP (PowerPAD™)
    • 28 WQFN

  • Protection Features
    • VM Undervoltage Lockout (UVLO2)
    • Logic Undervoltage (UVLO1)
    • Charge Pump Undervoltage (CPUV)
    • Overcurrent Protection (OCP)
      • Latched OCP Mode
      • Retry OCP Mode
    • Thermal Shutdown (TSD)
    • Fault Condition Indication Pin (nFAULT)
  • Microstepping Stepper Motor Driver
    • STEP/DIR Interface
    • Up to 1/16 Microstepping Indexer
    • Non-Circular and Standard ½ Step Modes
  • 6.5- to 45-V Operating Supply Voltage Range
  • Multiple Decay Modes to Support Any Motor
    • Smart tune
    • Mixed Decay
    • Slow Decay
    • Fast Decay
  • Adaptive Blanking Time for Smooth Stepping
  • Configurable Off-Time PWM Chopping
    • 10-, 20-, or 30-µs Off-Time
  • 3.3-V, 10-mA LDO Regulator
  • Low-Current Sleep Mode (28 µA)
  • Small Package and Footprint
    • 28 HTSSOP (PowerPAD™)
    • 28 WQFN

  • Protection Features
    • VM Undervoltage Lockout (UVLO2)
    • Logic Undervoltage (UVLO1)
    • Charge Pump Undervoltage (CPUV)
    • Overcurrent Protection (OCP)
      • Latched OCP Mode
      • Retry OCP Mode
    • Thermal Shutdown (TSD)
    • Fault Condition Indication Pin (nFAULT)

The DRV8880 is a bipolar stepper motor driver for industrial applications. The device has two N-channel power MOSFET H-bridge drivers and a microstepping indexer. The DRV8880 is capable of driving 2.0 A full-scale current or 1.4-A rms current (with proper PCB ground plane for thermal dissipation and at 24 V and TA = 25°C).

Smart tune automatically tunes stepper motors for optimal current regulation performance and compensates for motor variation and aging effects. Additionally slow, fast, and mixed decay modes are available.

The STEP/DIR pins provide a simple control interface. The device can be configured in full-step up to 1/16- step modes. A low-power sleep mode is provided for very low quiescent current standby using a dedicated nSLEEP pin.

Internal protection functions are provided for undervoltage, charge pump faults, overcurrent, short-circuits, and overtemperature. Fault conditions are indicated by a nFAULT pin.

The DRV8880 is a bipolar stepper motor driver for industrial applications. The device has two N-channel power MOSFET H-bridge drivers and a microstepping indexer. The DRV8880 is capable of driving 2.0 A full-scale current or 1.4-A rms current (with proper PCB ground plane for thermal dissipation and at 24 V and TA = 25°C).

Smart tune automatically tunes stepper motors for optimal current regulation performance and compensates for motor variation and aging effects. Additionally slow, fast, and mixed decay modes are available.

The STEP/DIR pins provide a simple control interface. The device can be configured in full-step up to 1/16- step modes. A low-power sleep mode is provided for very low quiescent current standby using a dedicated nSLEEP pin.

Internal protection functions are provided for undervoltage, charge pump faults, overcurrent, short-circuits, and overtemperature. Fault conditions are indicated by a nFAULT pin.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
DRV8434E アクティブ 電流センシング機能内蔵、48V、2.5A、バイポーラ ステッパ モーターまたはデュアル ブラシ付きモーターのドライバ Higher current capabilities
DRV8436 アクティブ 電流センシング機能と 1/256 マイクロステップ機能を統合した、48V、1.5A のバイポーラ・ステッパ・モーター・ドライバ Wider voltage support
比較対象デバイスと類似の機能
DRV8425E アクティブ 統合型電流センシング機能搭載、35V、2A、バイポーラ・ステッパまたはデュアル・ブラシ付きモーターのドライバ 35V, 2A bipolar stepper or dual brushed motor driver with integrated current sensing
DRV8886AT アクティブ 電流センシング機能とスマート・チューニング・テクノロジーを統合した、37V、2A のバイポーラ・ステッパ・モーター・ドライバ The DRV8886AT includes Integrated Current Sensing and adaptive decay mode

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
9 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8880 2-A Stepper Motor Driver With Smart Tune データシート (Rev. C) PDF | HTML 2017年 8月 24日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
ホワイト・ペーパー How smart tune regulates current in stepper motors (Rev. A) 2019年 3月 19日
アプリケーション概要 Smart Tuning for Efficient Stepper Driving 2018年 11月 20日
技術記事 Getting smart about tuning your stepper motor PDF | HTML 2018年 8月 23日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
技術記事 Spin your stepper automatically PDF | HTML 2016年 3月 3日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

DRV8880EVM — DRV8880 デュアル・ハーフ・ブリッジ・ステッパ・モータ・ドライバ評価モジュール

This dual H-bridge driver with integrated FETs, DRV8880 can drive stepper motor drivers up to 1/16 microstepping with an on-chip indexer. Aimed at 24V motors, this device features AutoTune(TM) adaptive decay mode, which automatically adjusts the decay settings during operation to achieve the (...)

ユーザー ガイド: PDF
リファレンス・デザイン

TIDA-00830 — 24V ステッパ・モーター設計、AutoTune 付、リファレンス・デザイン

TIDA-00830 is an application overview of TI’s automatic stepper motor tuning feature known as AutoTune™.  This design showcases how quickly AutoTune can adapt to changes in system inputs or motor characteristics without the user having to apply any type of parameter tuning.  (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

TIDA-01370 — ストール検出向けエンコーダ搭載閉ループステッパ・モーターのリファレンス・デザイン

このリファレンス・デザインは、光学式ロータリー・インクリメンタル・エンコーダを使用して閉ループ・フィードバックを取得する状況で、DRV8880 が駆動するステッパ・モーターの停止検出に使用できます。このリファレンス・デザインは、閉ループ・アルゴリズムを使用して停止を検出する方法を提示します。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 28 オプションの表示
WQFN (RHR) 28 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ