LM10011

アクティブ

POL(ポイント・オブ・ロード)レギュレータ用の高精度(1%)4/6 ビット VID 電圧プログラマ、可変スタートアップ電流

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
DAC43204 アクティブ Hi-Z (ハイ インピーダンス) 対応、EEPROM と波形ジェネレータ搭載、8 ビット、4 チャネル、電圧 / 電流出力、スマート DAC 4-channel, voltage/current output device with high-z outputs for power-supply margining

製品詳細

Rating Catalog Operating temperature range (°C) -40 to 125
Rating Catalog Operating temperature range (°C) -40 to 125
WSON (DSC) 10 9 mm² 3 x 3
  • 1.0% Output Current Accuracy (0°C to 100°C)
  • 1.25% Output Current Accuracy (–40°C to 125°C)
  • Input Voltage Range: 2.97 V to 5.5 V
  • Pin Selectable VID Format (6- or 4-bit)
  • 16 Selectable Start-Up Currents
  • Precision Enable to Support Custom UVLO
  • SON-10 3-mm × 3-mm Footprint, 0.5-mm Pitch
  • Footprint Compatible with the LM10010
  • 1.0% Output Current Accuracy (0°C to 100°C)
  • 1.25% Output Current Accuracy (–40°C to 125°C)
  • Input Voltage Range: 2.97 V to 5.5 V
  • Pin Selectable VID Format (6- or 4-bit)
  • 16 Selectable Start-Up Currents
  • Precision Enable to Support Custom UVLO
  • SON-10 3-mm × 3-mm Footprint, 0.5-mm Pitch
  • Footprint Compatible with the LM10010

The LM10011 is a precision, digitally programmable device used to control the output voltage of a DC/DC converter. The LM10011 outputs a dc current proportional to a 6-bit or 4-bit input word. By connecting the IDAC_OUT pin to the feedback node of a regulator, the regulator output voltage can be adjusted to a desired range and resolution set by the user. As the input word counts up, the output voltage is adjusted higher based on the values of the feedback resistors in the converter.

The current from the IDAC_OUT pin on start-up is programmable by an external resistor to cover the range of 0 to 56.4 µA with 4 bits of resolution. The MODE pin allows programming of the device through a 4-bit parallel VID interface or through a 6-bit interface consisting of upper and lower 3-bit VID codes. The LM10011 is specifically designed to program a wide variety of Texas Instruments DC/DC converters for VID (Voltage Identification) applications.

The LM10011 is a precision, digitally programmable device used to control the output voltage of a DC/DC converter. The LM10011 outputs a dc current proportional to a 6-bit or 4-bit input word. By connecting the IDAC_OUT pin to the feedback node of a regulator, the regulator output voltage can be adjusted to a desired range and resolution set by the user. As the input word counts up, the output voltage is adjusted higher based on the values of the feedback resistors in the converter.

The current from the IDAC_OUT pin on start-up is programmable by an external resistor to cover the range of 0 to 56.4 µA with 4 bits of resolution. The MODE pin allows programming of the device through a 4-bit parallel VID interface or through a 6-bit interface consisting of upper and lower 3-bit VID codes. The LM10011 is specifically designed to program a wide variety of Texas Instruments DC/DC converters for VID (Voltage Identification) applications.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
6 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM10011 VID Voltage Programmer for Point of Load Regulator データシート (Rev. A) 2014年 10月 20日
アプリケーション・ノート DC/DC Converter Solutions for Hardware Accelerators in Data Center Applications (Rev. A) PDF | HTML 2021年 5月 4日
アプリケーション概要 Improving RF Power Amplifier Efficiency in 5G Radio Systems 2018年 9月 5日
技術記事 Is PMBus still useful without telemetry? PDF | HTML 2017年 5月 10日
技術記事 Power Tips: How to create an adjustable output power supply PDF | HTML 2015年 6月 24日
EVM ユーザー ガイド (英語) Application Note 2269 LM10011 Evaluation Board (Rev. A) 2013年 4月 23日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM10010EVM — LM10010 評価ボード

This evaluation module provides a VID interface to demonstrate the LM10010 and its control of an LM21215A-1 buck regulator. While operating from 3.0V to 5.5V, the LM10010 can adjust the LM21215A-1 output voltage from 0.7V to 1.1V in 6.4mV steps with a default startup output of 1.0V. A (...)

ユーザー ガイド: PDF
評価ボード

LM10011EVM — LM10011 4/6-Bit VID Voltage Programmer Evaluation Module

The Texas Instruments LM10011EVM evaluation module (EVM) provides a VID interface to test the LM10011 and its control of an LM21215A-1 buck regulator. The LM21215A-1 is capable of driving up to 15A of continuous load current with excellent output voltage accuracy due to its ±1% internal reference (...)
ユーザー ガイド: PDF
評価基板 (EVM) 向けの GUI

SNVC071 LM10011 GUI Installer

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
高精度 DAC(≤10 MSPS)
LM10011 POL(ポイント・オブ・ロード)レギュレータ用の高精度(1%)4/6 ビット VID 電圧プログラマ、可変スタートアップ電流
ハードウェア開発
評価ボード
LM10011EVM LM10011 4/6-Bit VID Voltage Programmer Evaluation Module
シミュレーション・モデル

LM10011 IBIS Model

SNVM575.ZIP (12 KB) - IBIS Model
シミュレーション・モデル

LM10011 PSpice Transient Model

SNVMAC4.ZIP (308 KB) - PSpice Model
シミュレーション・モデル

LM10011 Unencrypted PSpice Transient Model

SNVMAC5.ZIP (6 KB) - PSpice Model
計算ツール

ANALOG-ENGINEER-CALC — アナログ技術者向けカリキュレータ

アナログ・エンジニア向けカリキュレータは、アナログ回路設計エンジニアが日常的に繰り返し行っている計算の多くを迅速化します。この PC ベース・ツールはグラフィカル・インターフェイスにより、帰還抵抗を使用したオペアンプのゲイン設定から、A/D コンバータ(ADC)のドライブ・バッファ回路の安定化に最適な部品の選択に至るまで、一般的に行われている各種計算のリストを表示します。スタンドアロン・ツールとして使用できるほか、『アナログ回路設計式一覧ポケット・ガイド』で説明されているコンセプトと組み合わせることもできます。
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
シミュレーション・ツール

TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム

TINA-TI は、DC 解析、過渡解析、周波数ドメイン解析など、SPICE の標準的な機能すべてを搭載しています。TINA には多彩な後処理機能があり、結果を必要なフォーマットにすることができます。仮想計測機能を使用すると、入力波形を選択し、回路ノードの電圧や波形を仮想的に測定することができます。TINA の回路キャプチャ機能は非常に直観的であり、「クイックスタート」を実現できます。

TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)

TINA は DesignSoft (...)

ユーザー ガイド: PDF
英語版 (Rev.A): PDF
リファレンス・デザイン

PMP10488 — 適合型電圧スケーリング電源、通信および企業向けストレージ ASIC コア・レール

このデザインは、TPS53355 PowerStack 同期整流・降圧 SWIFT DC/DC コンバータと、LM10011 VID チップを使用して、ASIC コア用の AVS(アダプティブ電圧スケーリング)電源を実装します。このデザインは、10V ~ 14V の入力を受け入れ、1V、20A の出力を供給します。LM10011 は高精度のデジタル・プログラマブル・デバイスであり、ASIC コアの使用シナリオに応答して、降圧コンバータの出力電圧のレンジと精度を調整することができます。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

TIDEP0041 — TPS544C25 および LM10011 を使用して K2E 用 AVS SmartReflex コア電圧を生成、リファレンス・デザイン

The K2E requires the use of AVS SmartReflex control for the CVDD core voltage. This design provides method of generating the proper voltage without the need for any software. The circuit is currently implemented on the XEVMK2EX.
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

PMP10151 — Sepic、可変出力電圧および入力電流制限付き、リファレンス・デザイン

This reference design provides an adjustable output voltage between 20V and 25V and an input voltage range of 10V to 14V. It also provides the functionality to limit the input current of the converter between 70mA and 135mA. The adjustable values are set by a VID interface which is either discrete (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9464 — TI デザイン:30A、SIMPLE SWITCHER® パワー・モジュール、3.0V-14.5V

PMP9464 リファレンス・デザインは、30A の SIMPLE SWITCHER® パワー・モジュールである LMZ31530 を活用しています。LMZ31530 SIMPLE SWITCHER® パワー・モジュールは、使いやすい統合型パワー・ソリューションであり、30A の DC/DC コンバータに、パワー MOSFET、シールド付きインダクタ、受動部品を組み合わせて、低プロファイルの QFN パッケージに封入しています。

このデザインは LM25056 をフロント・エンドに配置しています。LM25056 は高性能のアナログおよびデジタル・テクノロジーと、PMBus 準拠の (...)

試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP7047 — 高性能の降圧コンバータ、TI TMS320 TCI6634 電源供給用 VID インターフェイス付き

PMP7047 リファレンス・デザインは、TPS56221 25A 降圧コンバータと LM10010 6 ビット VID インターフェイス・チップの採用により、アダプティブ電圧スケーリング(AVS)と TMS320 TCI6634 DSP コア・レールの厳密な電圧レギュレーションを実現しています。少ない部品点数と小さい PCB 面積で、スイッチング周波数 300KHz において高い効率と小さい電力損失を達成するように最適化されています。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

TIDEP0011 — パワー・ソリューション、C667x DSP AVS コア(CVDD)用、ダイナミック・ボルテージ・スケーリング付き

このリファレンス・デザインは、Keystone マルチコア DSP、主に C66x シリーズに AVS コア電源(CVDD)を供給することを目的としています。C66x シリーズは、SmartReflex テクノロジーを使用して、DSP の電源電圧制御を可能にします。この要件を満たすために、このデザインは同期整流・降圧コンバータ(TPS56121)と、POL(ポイント・オブ・ロード)レギュレータ(LM10011)を組み合わせています。LM10011 は、DSP から 6 ビットまたは 4 ビットの VCNTL を受け入れ、TPS56121 の出力電圧を、DSP (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
WSON (DSC) 10 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ