ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

LM20242

アクティブ

調整可能な周波数、4.5 ~ 36V、2A、電流モード、同期整流降圧レギュレータ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TLVM13620 アクティブ 4mm x 6mm x 1.8mm パッケージ封止、3.6V ~ 36V 入力、1V ~ 6V 出力、2A 降圧モジュール Save board space, simplify design and speed time to market with an integrated-inductor power module.

製品詳細

Vin (min) (V) 4.5 Vin (max) (V) 36 Vout (min) (V) 0.8 Vout (max) (V) 32 Iout (max) (A) 2 Iq (typ) (mA) 2 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Enable, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 90 Type Converter
Vin (min) (V) 4.5 Vin (max) (V) 36 Vout (min) (V) 0.8 Vout (max) (V) 32 Iout (max) (A) 2 Iq (typ) (mA) 2 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Enable, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 90 Type Converter
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4

  • 2A Output Current, 3.7A peak current
  • 130 mΩ/110 mΩ integrated power MOSFETs
  • 1.5% output voltage accuracy
  • Current Mode Control, selectable compensation
  • Resistor programmed, 1MHz capable oscillator
  • Synchronous rectifier with diode emulation
  • Adjustable output voltage down to 0.8V
  • Compatible with pre-biased loads
  • Programmable soft-start with external capacitor
  • Precision enable pin with hysteresis
  • OVP, UVLO inputs and PGOOD output
  • Internally protected with peak current limit, thermal shutdown and restart
  • Accurate current limit with frequency foldback
  • Non-linear current mode slope compensation
  • eTSSOP-20 exposed pad package

  • 2A Output Current, 3.7A peak current
  • 130 mΩ/110 mΩ integrated power MOSFETs
  • 1.5% output voltage accuracy
  • Current Mode Control, selectable compensation
  • Resistor programmed, 1MHz capable oscillator
  • Synchronous rectifier with diode emulation
  • Adjustable output voltage down to 0.8V
  • Compatible with pre-biased loads
  • Programmable soft-start with external capacitor
  • Precision enable pin with hysteresis
  • OVP, UVLO inputs and PGOOD output
  • Internally protected with peak current limit, thermal shutdown and restart
  • Accurate current limit with frequency foldback
  • Non-linear current mode slope compensation
  • eTSSOP-20 exposed pad package

  • The LM20242 is a full featured 1MHz capable synchronous buck regulator capable of delivering up to 2A of load current. The current mode control loop is externally compensated with only two external components, offering both high performance and ease of use. The device is optimized to work over the input voltage range of 4.5V to 36V making it well suited for high voltage systems.

    The device features internal Over Voltage Protection (OVP) and Over Current Protection (OCP) circuits for increased system reliability. A precision Enable pin and integrated UVLO allows the turn on of the device to be tightly controlled and sequenced. Startup inrush currents are limited by both an internally fixed and externally adjustable soft-start circuit. Fault detection and supply sequencing are possible with the integrated PGOOD circuit.

    The LM20242 is designed to work well in multi-rail power supply architectures. The output voltage of the device can be configured to track a higher voltage rail using the SS/TRK pin. If the output of the LM20242 is pre-biased at startup it will not sink current to pull the output low until the internal soft-start ramp exceeds the voltage at the feedback pin.

    The LM20242 is offered in an exposed pad 20 pin TSSOP package that can be soldered to the PCB, eliminating the need for bulky heatsinks.


    The LM20242 is a full featured 1MHz capable synchronous buck regulator capable of delivering up to 2A of load current. The current mode control loop is externally compensated with only two external components, offering both high performance and ease of use. The device is optimized to work over the input voltage range of 4.5V to 36V making it well suited for high voltage systems.

    The device features internal Over Voltage Protection (OVP) and Over Current Protection (OCP) circuits for increased system reliability. A precision Enable pin and integrated UVLO allows the turn on of the device to be tightly controlled and sequenced. Startup inrush currents are limited by both an internally fixed and externally adjustable soft-start circuit. Fault detection and supply sequencing are possible with the integrated PGOOD circuit.

    The LM20242 is designed to work well in multi-rail power supply architectures. The output voltage of the device can be configured to track a higher voltage rail using the SS/TRK pin. If the output of the LM20242 is pre-biased at startup it will not sink current to pull the output low until the internal soft-start ramp exceeds the voltage at the feedback pin.

    The LM20242 is offered in an exposed pad 20 pin TSSOP package that can be soldered to the PCB, eliminating the need for bulky heatsinks.


    ダウンロード 字幕付きのビデオを表示 ビデオ

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    8 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート LM20242 36V, 2A PowerWise ® Adjustable Frequency Synchronous Buck Regu(jp) データシート (Rev. D 翻訳版) 最新英語版 (Rev.E) PDF | HTML 2008年 5月 29日
    セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
    その他の技術資料 LM20242 入力4.5V~36V 出力2A  同期整流降圧DCDCコンバータ 2013年 12月 11日
    EVM ユーザー ガイド (英語) AN-1694 LM20242 Evaluation Board (Rev. B) 2013年 5月 5日
    アプリケーション・ノート AN-2077 LM20k POL Module (Rev. A) 2013年 5月 3日
    製品概要 36V耐圧版、LM20Kファミリー 2012年 8月 20日
    ユーザー・ガイド LM20242 Demonstration Board User Guide 2012年 1月 27日
    ユーザー・ガイド Application Note 1694 LM20242 Evaluation Board (jp) 2007年 10月 30日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    評価ボード

    LM20242EVAL — 36V、2A PowerWise 可変周波数、同期整流・降圧レギュレータ

    The LM20242 synchronous rectifier Buck evaluation board is designed to provide the design engineer with a fully functional Buck power converter based on Current Mode Control to evaluate the LM20242 switching regulator IC. The evaluation board provides a 3.3V output with 2A current capability. The (...)

    ユーザー ガイド: PDF
    CAD/CAE シンボル

    LM20242 Demonstration Board CAD File

    SNVC015.ZIP (436 KB)
    計算ツール

    LM20242DESIGN-CALC — LM20242 カリキュレータ・スプレッドシート

    シミュレーション・ツール

    PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

    PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

    設計とシミュレーション向けの環境である PSpice for TI (...)
    リファレンス・デザイン

    PMP4494 — 200mS 出力電圧ホールドアップ・タイム回路付き 5V ~ 3.3V 1.2A DC/DC コンバータのリファレンス・デザイン

    The PMP4494 is a 5V to 3.3V 1.2A DC-DC converter with a Vout hold-up circuit. The synchronous buck converter LM20242 is used in the design to provide high efficiency for the system voltage. A boost converter TPS61170 boosts an auxiliary rail from 10V up to 20V to provide the backup voltage. A (...)
    試験報告書: PDF
    回路図: PDF
    パッケージ ピン数 ダウンロード
    HTSSOP (PWP) 20 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ