ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 昇圧 (ブースト) レギュレータ 昇圧コントローラ (スイッチ外付け)

LM25122-Q1

アクティブ

AEC-Q100 認証済み、多相機能対応、3 ~ 42V の広い入力電圧範囲 (Vin)、同期整流昇圧コントローラ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LM51231-Q1 アクティブ 2.2MHz 広い入力電圧範囲 (VIN) 同期整流昇圧コントローラ、出力電圧トラッキング付き Updated, better specs

製品詳細

Topology Boost, Flyback, Forward, SEPIC Vin (min) (V) 3 Vin (max) (V) 42 Vout (min) (V) 3 Vout (max) (V) 50 Regulated outputs (#) 1 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 600 Iq (typ) (mA) 4 Features Enable, Frequency synchronization, Phase Interleaving, Synchronous Rectification Duty cycle (max) (%) 100 Rating Automotive Operating temperature range (°C) -40 to 125 Type Controller Thermal resistance θJA (°C/W) 36
Topology Boost, Flyback, Forward, SEPIC Vin (min) (V) 3 Vin (max) (V) 42 Vout (min) (V) 3 Vout (max) (V) 50 Regulated outputs (#) 1 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 600 Iq (typ) (mA) 4 Features Enable, Frequency synchronization, Phase Interleaving, Synchronous Rectification Duty cycle (max) (%) 100 Rating Automotive Operating temperature range (°C) -40 to 125 Type Controller Thermal resistance θJA (°C/W) 36
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4
  • AEC-Q100 Qualified with the following results:
    • Device Temperature Grade 1: -40°C to +125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C6
  • Maximum Input Voltage : 42 V
  • Min Input Voltage : 3 V (4.5 V for startup)
  • Output Voltage up to 50 V
  • Bypass (VOUT = VIN) Operation
  • 1.2 V Reference with ±1.0% Accuracy
  • Free-Run and Synchronizable Switching to 600 kHz
  • Peak Current Mode Control
  • Robust 3 A Integrated Gate Drivers
  • Adaptive Dead-Time Control
  • Optional Diode Emulation Mode
  • Programmable Cycle-by-Cycle Current Limit
  • Hiccup Mode Overload Protection
  • Programmable Line UVLO
  • Programmable Soft-Start
  • Thermal Shutdown Protection
  • Low Shutdown Quiescent Current: 9 µA
  • Programmable Slope Compensation
  • Programmable Skip Cycle Mode Reduces Standby Power
  • Allows External VCC Supply
  • Inductor DCR Current Sensing Capability
  • Multiphase Capability
  • Thermally Enhanced 20-Pin HTSSOP
  • AEC-Q100 Qualified with the following results:
    • Device Temperature Grade 1: -40°C to +125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C6
  • Maximum Input Voltage : 42 V
  • Min Input Voltage : 3 V (4.5 V for startup)
  • Output Voltage up to 50 V
  • Bypass (VOUT = VIN) Operation
  • 1.2 V Reference with ±1.0% Accuracy
  • Free-Run and Synchronizable Switching to 600 kHz
  • Peak Current Mode Control
  • Robust 3 A Integrated Gate Drivers
  • Adaptive Dead-Time Control
  • Optional Diode Emulation Mode
  • Programmable Cycle-by-Cycle Current Limit
  • Hiccup Mode Overload Protection
  • Programmable Line UVLO
  • Programmable Soft-Start
  • Thermal Shutdown Protection
  • Low Shutdown Quiescent Current: 9 µA
  • Programmable Slope Compensation
  • Programmable Skip Cycle Mode Reduces Standby Power
  • Allows External VCC Supply
  • Inductor DCR Current Sensing Capability
  • Multiphase Capability
  • Thermally Enhanced 20-Pin HTSSOP

The LM25122 is a multiphase capable synchronous boost controller intended for high-efficiency synchronous boost regulator applications. The control method is based upon peak current mode control. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting and ease of loop compensation.

The switching frequency is programmable up to 600 kHz. Higher efficiency is achieved by two robust N-channel MOSFET gate drivers with adaptive dead-time control. A user-selectable diode emulation mode also enables discontinuous mode operation for improved efficiency at light load conditions.

An internal charge pump allows 100% duty cycle for high-side synchronous switch (Bypass operation). A 180º phase shifted clock output enables easy multi-phase interleaved configuration. Additional features include thermal shutdown, frequency synchronization, hiccup mode current limit and adjustable line undervoltage lockout.

The LM25122 is a multiphase capable synchronous boost controller intended for high-efficiency synchronous boost regulator applications. The control method is based upon peak current mode control. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting and ease of loop compensation.

The switching frequency is programmable up to 600 kHz. Higher efficiency is achieved by two robust N-channel MOSFET gate drivers with adaptive dead-time control. A user-selectable diode emulation mode also enables discontinuous mode operation for improved efficiency at light load conditions.

An internal charge pump allows 100% duty cycle for high-side synchronous switch (Bypass operation). A 180º phase shifted clock output enables easy multi-phase interleaved configuration. Additional features include thermal shutdown, frequency synchronization, hiccup mode current limit and adjustable line undervoltage lockout.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LM5123-Q1 アクティブ 2.2MHz、広い入力電圧範囲 (VIN)、低静止電流 (IQ)、同期整流昇圧コントローラ LM5123-Q1 has updated/better specs

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
6 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM25122-Q1 Wide-Input Synchronous Boost Controller With Multiple Phase Capability データシート (Rev. B) PDF | HTML 2016年 5月 27日
ホワイト・ペーパー An overview of radiated EMI specifications for power supplies 2018年 6月 5日
ホワイト・ペーパー An overview of conducted EMI specifications for power supplies 2018年 2月 1日
アプリケーション概要 Improve DC/DC Regulator EMI for Free with Optimized Power Stage Layout 2017年 11月 13日
技術記事 Get loud with a 700W automotive audio amplifier for infotainment systems PDF | HTML 2017年 6月 15日
その他の技術資料 TI Automotive External Amplifiers (Rev. A) 2017年 2月 3日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

計算ツール

SNVC196 LM25122-Q1 Design Calculator

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
昇圧コントローラ (スイッチ外付け)
LM25122-Q1 AEC-Q100 認証済み、多相機能対応、3 ~ 42V の広い入力電圧範囲 (Vin)、同期整流昇圧コントローラ LM5122ZA マルチフェーズ機能搭載、3 ~ 65V の広い入力電圧範囲 (VIN)、電流モード、同期整流昇圧コントローラ
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

PMP11769 — 車載 700W 外部オーディオ・アンプのリファレンス・デザイン

このリファレンス・デザインが搭載している昇圧コンバータは、9 ~ 16V の入力電圧を受け入れ、36.0V の出力電圧で 10.0A の連続電流 / 20.0A のピーク電流を供給します。また、2 個のプレミアム Class-D オーディオ・アンプも搭載しており、これらのアンプは 2 個の 4Ω 負荷 (左チャネルと右チャネル) への 175W 出力と、1 個の 2Ω負荷 (サブウーファー) への350W 出力を供給します。このデザインには、薄型プロファイルおよび大電力出力という特長があるので、車載オーディオの外部アンプ・アプリケーションに最適です。

試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP31114 — 3V のコールド・クランキングに対処する同期 SEPIC のリファレンス・デザイン

このリファレンス・デザインは、5V の出力電圧で 5A の最大出力電流を供給する LM25122 を使用しています。代表的な入力電圧範囲は 6V ~ 18V です。このデザインは、最小 3V のコールド・クランク、および最大 36V のロード・ダンプという入力電圧に耐えることができます。この個別のボードの実測スイッチング周波数 FSW は、261kHz でした。底面にある付加的なジャンパを使用して、オン / オフ機能に必要な機能を実現できます。
試験報告書: PDF
リファレンス・デザイン

TIDA-01610 — オーディオ・アンプ向け車載トラッキング電源のリファレンス・デザイン

このリファレンス・デザインは、10A の 2 相昇圧コンバータを 1 個実装し、16V ~ 40V DC の電圧範囲で動的に設定可能な調整可能出力電圧を供給します。この出力電圧範囲により、プロセッサからの PWM 信号供給、または電圧供給を実施する場合、オーディオ信号への追従が可能です。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-01534 — バッテリからの電力供給で動作する車載 2 相昇圧コンバータのリファレンス・デザイン

このリファレンス・デザインは、大出力、広い入力電圧範囲の回路で、2 相構成の同期整流昇圧コントローラを複数使用し、それぞれが診断機能付きで最大 2.5A を供給できる 4 個の切り替え可能な 12V レールを出力します。さらに、2 個の大電流、低電圧レールを生成するデュアル同期整流降圧回路も搭載しています。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-01553 — 2.5V のコールド・クランク・プロファイルに対応し、バッテリからの電力供給で動作する車載 VCM のリファレンス・デザイン

このリファレンス・デザインは、入力電圧範囲が広く、大電流を供給する回路であり、最小 2.5V というエンジンのコールド・クランク・プロファイルに対処できます。デュアル出力電圧は 5V と 3.3V で、各出力は最大 10A を供給できます。このデザインは、最小 2.5V に低下する非常に過酷な始動プロファイルをサポートする必要のある、バッテリ直結型の車載用インフォテイメント・アプリケーションに適しています。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

PMP21112 — エンベロープ・トラッキング機能搭載、効率 98%、400W 可変出力、2 相昇圧のリファレンス・デザイン

PMP21112 is a dual-phase boost reference design utilizing the LM25112-Q1 controller for automotive applications. This design can operate from 9V to 16V. The design has an adjustable output of 16V to 40V and capable of sourcing 10A continuous current. LM25112-Q1 has a bypass function where Vin is (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP30331 — 車載プリレギュレータ(SEPIC 5Vout@3A)のリファレンス・デザイン

The PMP30331 reference design is for an input voltage from 5V to 16V.  Cranking is possible for voltages as low as 4V and load dump for voltages to 36V.  This reference design uses the SEPIC topology as a cost effective alternative for 4 switch buck-boost (for low power).
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00699 — フロント・エンド電源、リファレンス・デザイン、コールド・クランク操作、過渡保護、EMI フィルタ付

このソリューションは、10 ~ 15W のシステム向けに広範囲で利用可能な車載バッテリ直結のフロント・エンド電源を実現する目的で設計されています。EMI / EMC のテストと準拠に注目し、車載エレクトロニクス・サブシステムの製造に関連する規制要件を達成できるように設計者をサポートします。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 20 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ