アナログ出力、±3℃、1.6V ~ 5.5V 対応、工場出荷時プリセットのトリップ ポイント、温度スイッチ

製品詳細

Setpoint type Factory Programmed Setpoint value (°C) 50, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110, 115, 120, 125, 135, 140, 145, 150 Operating temperature range (°C) -40 to 150 Accuracy over temp range (max) (°C) 2.3 Sensor gain (mV/°C) -12.8, -10.3, -7.7, -5.1 Output type Open drain, Push Pull Supply voltage (min) (V) 1.6 Supply voltage (max) (V) 5.5 Supply current (typ) (µA) 8 Number of comparator channels 1 Features Built-in hysteresis, Trip-Test Pin Rating Catalog Interface type Analog output, Switch
Setpoint type Factory Programmed Setpoint value (°C) 50, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110, 115, 120, 125, 135, 140, 145, 150 Operating temperature range (°C) -40 to 150 Accuracy over temp range (max) (°C) 2.3 Sensor gain (mV/°C) -12.8, -10.3, -7.7, -5.1 Output type Open drain, Push Pull Supply voltage (min) (V) 1.6 Supply voltage (max) (V) 5.5 Supply current (typ) (µA) 8 Number of comparator channels 1 Features Built-in hysteresis, Trip-Test Pin Rating Catalog Interface type Analog output, Switch
WSON (NGF) 6 5.5 mm² 2.5 x 2.2

  • Low 1.6V operation
  • Low quiescent current
  • Latching function: device can latch the Over Temperature condition
  • Push-pull and open-drain temperature switch outputs
  • Wide trip point range of 0°C to 150°C
  • Very linear analog VTEMP temperature sensor output
  • VTEMP output short-circuit protected
  • Accurate over −50°C to 150°C temperature range
  • 2.2 mm by 2.5 mm (typ) LLP-6 package
  • Excellent power supply noise rejection
  • LM26LVQISD–130 only is AEC-Q100 Grade 0 qualified and is manufactured on an Automotive Grade flow. For other trip points, contact your sales office.

  • Key Specifications

    Supply Voltage 1.6V to 5.5V
    Supply Current 8 μA (typ)
    Accuracy, Trip Point  Temperature  0°C to 150°C ±2.2°C
    Accuracy, VTEMP 0°C to 150°C ±2.3°C
      0°C to 120°C ±2.2°C
      −50°C to 0°C ±1.7°C
    VTEMP Output Drive ±100 μA
    Operating Temperature −50°C to 150°C
    Hysteresis Temperature 4.5°C to 5.5°C

  • Low 1.6V operation
  • Low quiescent current
  • Latching function: device can latch the Over Temperature condition
  • Push-pull and open-drain temperature switch outputs
  • Wide trip point range of 0°C to 150°C
  • Very linear analog VTEMP temperature sensor output
  • VTEMP output short-circuit protected
  • Accurate over −50°C to 150°C temperature range
  • 2.2 mm by 2.5 mm (typ) LLP-6 package
  • Excellent power supply noise rejection
  • LM26LVQISD–130 only is AEC-Q100 Grade 0 qualified and is manufactured on an Automotive Grade flow. For other trip points, contact your sales office.

  • Key Specifications

    Supply Voltage 1.6V to 5.5V
    Supply Current 8 μA (typ)
    Accuracy, Trip Point  Temperature  0°C to 150°C ±2.2°C
    Accuracy, VTEMP 0°C to 150°C ±2.3°C
      0°C to 120°C ±2.2°C
      −50°C to 0°C ±1.7°C
    VTEMP Output Drive ±100 μA
    Operating Temperature −50°C to 150°C
    Hysteresis Temperature 4.5°C to 5.5°C

    The LM26LV/LM26LVQ is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (TTRIP) can be preset at the factory to any temperature in the range of 0°C to 150°C in 1°C increments. Built-in temperature hysteresis (THYST) keeps the output stable in an environment of temperature instability.

    In normal operation the LM26LV/LM26LVQ temperature switch outputs assert when the die temperature exceeds TTRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (TTRIP − THYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the ^OVERTEMP digital output, is active-low with an open-drain structure.

    The analog output, VTEMP, delivers an analog output voltage with Negative Temperature Coefficient (NTC).

    Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the VTEMP output pin, which could be used to verify the temperature trip point.

    The LM26LV/LM26LVQ's low minimum supply voltage makes it ideal for 1.8 Volt system designs. Its wide operating range, low supply current , and excellent accuracy provide a temperature switch solution for a wide range of commercial and industrial applications.


    The LM26LV/LM26LVQ is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (TTRIP) can be preset at the factory to any temperature in the range of 0°C to 150°C in 1°C increments. Built-in temperature hysteresis (THYST) keeps the output stable in an environment of temperature instability.

    In normal operation the LM26LV/LM26LVQ temperature switch outputs assert when the die temperature exceeds TTRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (TTRIP − THYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the ^OVERTEMP digital output, is active-low with an open-drain structure.

    The analog output, VTEMP, delivers an analog output voltage with Negative Temperature Coefficient (NTC).

    Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the VTEMP output pin, which could be used to verify the temperature trip point.

    The LM26LV/LM26LVQ's low minimum supply voltage makes it ideal for 1.8 Volt system designs. Its wide operating range, low supply current , and excellent accuracy provide a temperature switch solution for a wide range of commercial and industrial applications.


    ダウンロード 字幕付きのビデオを表示 ビデオ

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    2 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート LM26LV/LM26LVQ 1.6 V, LLP-6 Factory Preset Temp Switch and Temperature Sens(jp) データシート (Rev. D 翻訳版) 最新英語版 (Rev.G) PDF | HTML 2011年 9月 6日
    EVM ユーザー ガイド (英語) LM26LVEVM User's Guide 2015年 9月 11日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    リファレンス・デザイン

    PMP22396 — 2460-W bidirectional boost converter reference design for automotive applications

    This reference design is a 2460-W bidirectional boost converter for automotive applications. The circuit is powered from the nominal 12-V battery to provide an output voltage of 48 V at 51.25 A. The design uses two dual-phase synchronous bidirectional controllers operating at a switching frequency (...)
    試験報告書: PDF
    回路図: PDF
    リファレンス・デザイン

    PMP21867 — 12-V / 100-A negative-to-positive synchronous buck-boost reference design for power amplifiers

    このリファレンス・デザインは、パワー・アンプ・アプリケーション向けに、負電圧を受け入れ、正電圧を出力する同期整流昇降圧コンバータです。この回路は、公称 -48V システム電源からの電力を受け入れ、+12V の出力電圧で 100A を供給します。このデザインは、100kHz のスイッチング周波数と 4 相動作を想定した、デュアル同期整流昇圧コントローラを 2 個使用します。+14.5V への出力電圧調整は、ジャンパで選択可能です。単相から 4 相までの動作も、ジャンパで選択可能です。
    試験報告書: PDF
    回路図: PDF
    リファレンス・デザイン

    PMP15035 — 1000W、双方向、12V ~ 12V コンバータのリファレンス・デザイン

    This reference design is a dual-channel, bidirectional converter suitable for 12-V to 12-V, dual-battery system, automotive applications. This reference design has a wide input range (3 V to 40 V) and could give full load (1kW) in the input voltage from 9V to 18V by using two LM5170-Q1 (...)
    試験報告書: PDF
    回路図: PDF
    パッケージ ピン数 ダウンロード
    WSON (NGF) 6 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ