ホーム パワー・マネージメント AC/DC & DC/DC converters (integrated FET)

2.9V ~ 18V、エミュレーション・ピーク電流モード降圧コントローラ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと類似の機能
TPS546A24A アクティブ ピン・ストラップ機能搭載、PMBus 対応、2.95V ~ 18V、スタッカブル 10A、同期整流SWIFT™ 降圧コンバータ Upgraded PMBus and faster switching frequency.

製品詳細

Iout (max) (A) 10 Vin (min) (V) 2.9 Vin (max) (V) 18 Topology Buck Type Controller Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1500 Features Enable, Frequency synchronization, Tracking Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125
Iout (max) (A) 10 Vin (min) (V) 2.9 Vin (max) (V) 18 Topology Buck Type Controller Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1500 Features Enable, Frequency synchronization, Tracking Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125
TSSOP (PW) 16 32 mm² 5 x 6.4

  • Input voltage from 2.9V to 18V
  • Output voltage adjustable from 0.6V to 5.5V
  • Feedback Accuracy: ±1%
  • Low-side Sensing, Programmable Current Limit without sense resistor
  • Input Under Voltage Lockout
  • Hiccup mode current limit protection eliminates thermal runaway during fault conditions
  • Internal soft start with tracking capability
  • 200 kHz to 1.5 MHz Switching frequency, Synchronizable
  • On-chip gate drivers
  • Soft output discharge during shutdown
  • Startup into output pre-bias
  • Operation from a single input rail
  • Adaptive Duty Cycle Limit
  • TSSOP-16 package

  • Input voltage from 2.9V to 18V
  • Output voltage adjustable from 0.6V to 5.5V
  • Feedback Accuracy: ±1%
  • Low-side Sensing, Programmable Current Limit without sense resistor
  • Input Under Voltage Lockout
  • Hiccup mode current limit protection eliminates thermal runaway during fault conditions
  • Internal soft start with tracking capability
  • 200 kHz to 1.5 MHz Switching frequency, Synchronizable
  • On-chip gate drivers
  • Soft output discharge during shutdown
  • Startup into output pre-bias
  • Operation from a single input rail
  • Adaptive Duty Cycle Limit
  • TSSOP-16 package

  • The LM3495 is a PWM buck regulator which implements a unique emulated peak current mode control. This control method eliminates the switching noise which typically limits current mode operation at extremely short duty cycles and high operating frequency. The switching frequency is programmable between 200 kHz and 1.5 MHz, and can also be synchronized to an external clock. The LM3495 is also very fault tolerant with both switch node short, hiccup mode, and adaptive duty cycle limit protection. A 0.6V 1% reference and glitch free pre-biased start-up ensure the most demanding digital loads operate reliably. Internal soft start and the ability to track the output of another supply make the LM3495 versatile and efficient.


    The LM3495 is a PWM buck regulator which implements a unique emulated peak current mode control. This control method eliminates the switching noise which typically limits current mode operation at extremely short duty cycles and high operating frequency. The switching frequency is programmable between 200 kHz and 1.5 MHz, and can also be synchronized to an external clock. The LM3495 is also very fault tolerant with both switch node short, hiccup mode, and adaptive duty cycle limit protection. A 0.6V 1% reference and glitch free pre-biased start-up ensure the most demanding digital loads operate reliably. Internal soft start and the ability to track the output of another supply make the LM3495 versatile and efficient.


    ダウンロード 字幕付きのビデオを表示 ビデオ

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    5 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート LM3495 Emulated Peak Current Mode Buck Controller for Low Output Voltage (jp) データシート (Rev. E 翻訳版) 最新英語版 (Rev.F) PDF | HTML 2007年 11月 28日
    ユーザー・ガイド LM3495 Buck Controller Evaluation Module User's Guide (Rev. C) 2022年 2月 1日
    技術記事 When and how to supply an external bias for buck controllers – part 2 PDF | HTML 2017年 12月 22日
    Analog Design Journal Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics 2016年 7月 21日
    アプリケーション・ノート Emulatd Cur Mode Cntrl for Buck Regs Using Sample and Hold Technique 2007年 3月 21日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    評価ボード

    LM3495EVAL — エミュレーテッド・ピーク電流モード・バック・コントローラ、低出力電圧用

    The Evaluation Board has been designed for testing of various circuits using the LM3495 buck regulator controller. A complete schematic for all the components is shown in Figure 3. The board is four layers, consisting of signal/power traces on top and bottom, one internal ground plane, and an (...)

    ユーザー ガイド: PDF
    パッケージ ピン数 ダウンロード
    TSSOP (PW) 16 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ