ステレオ・ヘッドホン機能搭載、2.2W、モノラル、アナログ入力 Class-AB オーディオ・アンプ

製品詳細

Audio input type Analog Input Architecture Class-AB Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 3 Output power (W) 2.7 SNR (dB) 98 THD + N at 1 kHz (%) 0.3 Iq (typ) (mA) 5.8 Control interface Hardware Analog supply (min) (V) 2 Analog supply voltage (max) (V) 5.5 PSRR (dB) 67 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-AB Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 3 Output power (W) 2.7 SNR (dB) 98 THD + N at 1 kHz (%) 0.3 Iq (typ) (mA) 5.8 Control interface Hardware Analog supply (min) (V) 2 Analog supply voltage (max) (V) 5.5 PSRR (dB) 67 Operating temperature range (°C) -40 to 85
WQFN (NHW) 24 20 mm² 5 x 4
  • Stereo headphone amplifier mode
  • "Click and pop" suppression circuitry
  • Unity-gain stable
  • Thermal shutdown protection circuitry
  • SOIC, TSSOP, exposed-DAP TSSOP, and LLP packages

* Not recommended for new designs. Contact NSC Audio Marketing.


  • Stereo headphone amplifier mode
  • "Click and pop" suppression circuitry
  • Unity-gain stable
  • Thermal shutdown protection circuitry
  • SOIC, TSSOP, exposed-DAP TSSOP, and LLP packages

* Not recommended for new designs. Contact NSC Audio Marketing.


The LM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4 load or 2.5W to a 3 load with less than 1.0% THD+N. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones.

Boomer audio power amplifiers were designed specifically to provide high quality output power from a surface mount package while requiring few external components. To simplify audio system design, the LM4863 combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip.

The LM4863 features an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce "clicks and pops" during device turn-on.


Key Specifications

PO at 1% THD+N

 

LM4863LQ, 3, 4 loads

2.5W(typ), 2.2W(typ)

LM4863MTE, 3, 4 loads

2.5W(typ), 2.2W(typ)

LM4863MTE, 8 load

1.1W(typ)

LM4863, 8

1.1W(typ)

Single-ended mode THD+N at 75mW into 32

0.5%(max)

Shutdown current

0.7µA(typ)

Supply voltage range

2.0V to 5.5V


The LM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4 load or 2.5W to a 3 load with less than 1.0% THD+N. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones.

Boomer audio power amplifiers were designed specifically to provide high quality output power from a surface mount package while requiring few external components. To simplify audio system design, the LM4863 combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip.

The LM4863 features an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce "clicks and pops" during device turn-on.


Key Specifications

PO at 1% THD+N

 

LM4863LQ, 3, 4 loads

2.5W(typ), 2.2W(typ)

LM4863MTE, 3, 4 loads

2.5W(typ), 2.2W(typ)

LM4863MTE, 8 load

1.1W(typ)

LM4863, 8

1.1W(typ)

Single-ended mode THD+N at 75mW into 32

0.5%(max)

Shutdown current

0.7µA(typ)

Supply voltage range

2.0V to 5.5V


ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
TPA2008D2 アクティブ DC ボリューム制御付き、3W、ステレオ、アナログ入力 Class-D オーディオ・アンプ This product is a Class-D audio amplifier with similar output power, does not include headphone output, and has DC gain control instead of a feedback resistor.
TPA2012D2 アクティブ 選択可能なゲイン機能搭載、2.1W、ステレオ、アナログ入力 Class-D オーディオ・アンプ This product is a Class-D audio amplifier with similar output power, does not include headphone output and has selectable gain rather than a feedback resistor.

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM4863   Dual 2.2W Audio Amplifier Plus Stereo Headphone Function (jp) データシート (Rev. E 翻訳版) 最新英語版 (Rev.F) PDF | HTML 2006年 10月 31日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
WQFN (NHW) 24 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ