87mW ヘッドホン・アンプと 3D 強化 (立体音響) 機能搭載、2.2W、モノラル、Class-D アンプ

製品詳細

Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 8 Output power (W) 1.19 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 4.5 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 79 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 8 Output power (W) 1.19 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 4.5 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 79 Operating temperature range (°C) -40 to 85
DSBGA (YZR) 25 7.5625 mm² 2.75 x 2.75
  • I2C Control Interface
  • I2C Programmable Texas Instruments 3D Audio
  • I2C Controlled 32 Step Digital Volume Control (-59.5dB to +18dB)
  • Three Independent Volume Channels (Left, Right, Mono)
  • Eight Distinct Output Modes
  • Small, 25–Bump DSBGA Packaging
  • “Click and Pop” Suppression Circuitry
  • Thermal Shutdown Protection
  • Low Shutdown Current (0.1μA, typ)
  • RF Suppression
  • Differential Mono and Stereo Inputs
  • Stereo Input Mux

Key Specifications

  • THD+N at 1kHz, 500mW into 8Ω BTL (3.3V): 1.0% (typ)
  • THD+N at 1kHz, 37mW into 32Ω SE (3.3V): 1.0% (typ)
  • Single Supply Operation (VDD): 2.7 to 5.5 V
  • I2C Single Supply Operation: 2.2 to 5.5 V

All trademarks are the property of their respective owners.

  • I2C Control Interface
  • I2C Programmable Texas Instruments 3D Audio
  • I2C Controlled 32 Step Digital Volume Control (-59.5dB to +18dB)
  • Three Independent Volume Channels (Left, Right, Mono)
  • Eight Distinct Output Modes
  • Small, 25–Bump DSBGA Packaging
  • “Click and Pop” Suppression Circuitry
  • Thermal Shutdown Protection
  • Low Shutdown Current (0.1μA, typ)
  • RF Suppression
  • Differential Mono and Stereo Inputs
  • Stereo Input Mux

Key Specifications

  • THD+N at 1kHz, 500mW into 8Ω BTL (3.3V): 1.0% (typ)
  • THD+N at 1kHz, 37mW into 32Ω SE (3.3V): 1.0% (typ)
  • Single Supply Operation (VDD): 2.7 to 5.5 V
  • I2C Single Supply Operation: 2.2 to 5.5 V

All trademarks are the property of their respective owners.

The LM4947 is an audio subsystem capable of efficiently delivering 500mW (Class D operation) of continuous average power into a mono 8Ω bridged-tied load (BTL) with 1% THD+N, 37mW (Class AB operation) power channel of continuous average power into stereo 32Ω single-ended (SE) loads with 1% THD+N, or an output capacitor-less (OCL) configuration with identical specification as the SE configuration, from a 3.3V power supply.

The LM4947 has six input channels: one pair for a two-channel stereo signal, the second pair for a secondary two-channel stereo input, and the third pair for a differential single-channel mono input. Additionally, the two sets of stereo inputs may be configured as a single stereo differential input (differential left and differential right). The LM4947 features a 32-step digital volume control and eight distinct output modes. The digital volume control, 3D enhancement, and output modes are programmed through a two-wire I2C compatible interface that allows flexibility in routing and mixing audio channels.

The RF suppression circuitry in the LM4947 makes it well-suited for GSM mobile phones and other portable applications in which strong RF signals generated by an antenna (and long output traces) may couple audibly into the amplifier.

The LM4947 is designed for cellular phones, PDAs, and other portable handheld applications. It delivers high quality output power from a surface-mount package and requires only eight external components in the OCL mode (two additional components in SE mode).

The LM4947 is an audio subsystem capable of efficiently delivering 500mW (Class D operation) of continuous average power into a mono 8Ω bridged-tied load (BTL) with 1% THD+N, 37mW (Class AB operation) power channel of continuous average power into stereo 32Ω single-ended (SE) loads with 1% THD+N, or an output capacitor-less (OCL) configuration with identical specification as the SE configuration, from a 3.3V power supply.

The LM4947 has six input channels: one pair for a two-channel stereo signal, the second pair for a secondary two-channel stereo input, and the third pair for a differential single-channel mono input. Additionally, the two sets of stereo inputs may be configured as a single stereo differential input (differential left and differential right). The LM4947 features a 32-step digital volume control and eight distinct output modes. The digital volume control, 3D enhancement, and output modes are programmed through a two-wire I2C compatible interface that allows flexibility in routing and mixing audio channels.

The RF suppression circuitry in the LM4947 makes it well-suited for GSM mobile phones and other portable applications in which strong RF signals generated by an antenna (and long output traces) may couple audibly into the amplifier.

The LM4947 is designed for cellular phones, PDAs, and other portable handheld applications. It delivers high quality output power from a surface-mount package and requires only eight external components in the OCL mode (two additional components in SE mode).

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM4947 Mono Class D & Stereo Audio Sub-Sys w/OCL Hp Amp & TI 3D データシート (Rev. D) 2013年 5月 1日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM4947TLEVAL — モノ Class-D およびステレオ・オーディオ・サブシステム、OCL ヘッドフォン・アンプ/ National 3D 付

The LM4947 is an integrated stereo subsystem with a filterless monoClass D speaker amplifier and selectable output low noise headphone amplifier in a 25-bump micro SMD package. The LM4947 also features RF suppression circuitry and TI 3D enhancement. The LM4947 is designed to meet the demands of (...)

評価基板 (EVM) 向けの GUI

SNAC026 LM4947 Control Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
スピーカ・アンプ
LM4947 87mW ヘッドホン・アンプと 3D 強化 (立体音響) 機能搭載、2.2W、モノラル、Class-D アンプ
ハードウェア開発
評価ボード
LM4947TLEVAL モノ Class-D およびステレオ・オーディオ・サブシステム、OCL ヘッドフォン・アンプ/ National 3D 付
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
DSBGA (YZR) 25 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ