ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

8 ~ 75V、広い入力電圧範囲 (Vin)、1A、コンスタント・オンタイム非同期整流降圧レギュレータ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TPSM365R6 アクティブ 3V ~ 36V 入力、1V ~ 13V 出力、0.6A、同期整流降圧コンバータ・パワー・モジュール Smaller design with an integrated-inductor power module.

製品詳細

Vin (min) (V) 8 Vin (max) (V) 75 Vout (min) (V) 2.5 Vout (max) (V) 70 Iout (max) (A) 1 Iq (typ) (mA) 0.65 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1000 Features Enable, Over Current Protection Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode Constant on-time (COT) Duty cycle (max) (%) 99 Type Converter
Vin (min) (V) 8 Vin (max) (V) 75 Vout (min) (V) 2.5 Vout (max) (V) 70 Iout (max) (A) 1 Iq (typ) (mA) 0.65 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1000 Features Enable, Over Current Protection Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode Constant on-time (COT) Duty cycle (max) (%) 99 Type Converter
HTSSOP (PWP) 14 32 mm² 5 x 6.4 WSON (DPR) 10 16 mm² 4 x 4
  • Input Voltage Range: 8 V to 75 V
  • Valley Current Limit At 1.25 A
  • Switching Frequency Can Exceed 1 MHz
  • Integrated N-Channel Buck Switch
  • Integrated Start-Up Regulator
  • No Loop Compensation Required
  • Ultra-Fast Transient Response
  • Operating Frequency Remains Constant With
    Load and Line Variations
  • Maximum Duty Cycle Limited During Start-Up
  • Adjustable Output Voltage
  • Precision 2.5-V Feedback Reference
  • Thermal Shutdown
  • Exposed Thermal Pad for Improved Heat
    Dissipation
  • Input Voltage Range: 8 V to 75 V
  • Valley Current Limit At 1.25 A
  • Switching Frequency Can Exceed 1 MHz
  • Integrated N-Channel Buck Switch
  • Integrated Start-Up Regulator
  • No Loop Compensation Required
  • Ultra-Fast Transient Response
  • Operating Frequency Remains Constant With
    Load and Line Variations
  • Maximum Duty Cycle Limited During Start-Up
  • Adjustable Output Voltage
  • Precision 2.5-V Feedback Reference
  • Thermal Shutdown
  • Exposed Thermal Pad for Improved Heat
    Dissipation

The LM5010 step-down switching regulator features all the functions needed to implement a low-cost, efficient, buck bias regulator capable of supplying in excess of 1-A load current. This high-voltage regulator contains an N-Channel Buck Switch, and is available in thermally enhanced 10-pin WSON and 14-pin HTSSOP packages. The hysteretic regulation scheme requires no loop compensation, resulting in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load variations due to the inverse relationship between the input voltage and the ON-time. The valley current limit detection is set at 1.25 A. Additional features include: VCC undervoltage lockout, thermal shutdown, gate drive undervoltage lockout, and maximum duty cycle limiter.

The LM5010 step-down switching regulator features all the functions needed to implement a low-cost, efficient, buck bias regulator capable of supplying in excess of 1-A load current. This high-voltage regulator contains an N-Channel Buck Switch, and is available in thermally enhanced 10-pin WSON and 14-pin HTSSOP packages. The hysteretic regulation scheme requires no loop compensation, resulting in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load variations due to the inverse relationship between the input voltage and the ON-time. The valley current limit detection is set at 1.25 A. Additional features include: VCC undervoltage lockout, thermal shutdown, gate drive undervoltage lockout, and maximum duty cycle limiter.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
5 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM5010 High-Voltage 1-A Step-Down Switching Regulator データシート (Rev. G) PDF | HTML 2016年 4月 27日
EVM ユーザー ガイド (英語) AN-1352 LM5010 Evaluation Board (Rev. A) 2013年 4月 30日
EVM ユーザー ガイド (英語) AN-1423 LM5010A Evaluation Board (Rev. A) 2013年 4月 30日
アプリケーション・ノート Controlling Output Ripple & Achiev ESR Indep Constant On-Time Reg Designs (Rev. A) 2013年 4月 23日
アプリケーション・ノート Controlling Output Ripple & Achiev ESR Indep Constant On-Time Reg Designs (jp) 最新英語版 (Rev.A) 2006年 9月 27日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM5010-EVAL — 高電圧(1A)降圧スイッチング・レギュレータ

LM5010 High Voltage 1A Step Down Switching Regulator

ユーザー ガイド: PDF
評価ボード

TAS3251EVM — TAS3251 175W ステレオ / 350W モノラル Ultra-HD デジタル入力 Class-D の評価モジュール

TAS3251 Ultra-HD オーディオ評価基板は、TI (テキサス・インスツルメンツ) の TAS3251 IC の実証に使用できます。TAS3251 は、デジタル入力の高性能 Class-D アンプであり、Class-D 効率を活用する真のプレミアム音質の実現に貢献します。このデジタル・フロント・エンドは、高性能の Burr-Brown™ DAC を採用したほか、DSP を内蔵しており、SmartAmp や SmartEQ (...)

ユーザー ガイド: PDF
評価ボード

TPA3244EVM — TPA3244 60W ステレオ / 110W ピーク Ultra-HD アナログ入力オーディオ Class-D パッド下部配置モジュール

TPA3244EVM PurePath™ Ultra-HD は、TI の TPA3244DDW 集積回路のための評価モジュールです。TPA3244DDW は、高効率 Class-D 技術を使用した高性能 Class-D アンプで、真のプレミアム音質を実現します。先進的な統合型フィードバック設計と高速ゲート・ドライバ誤り訂正機能(PurePath™ Ultra-HD)を採用しており、全オーディオ帯域で超低歪と優れた音質を実現します。  2 個の BTL(ステレオ 2.0)出力チャネル、1 個の PBTL(モノラル 0.1)出力チャネル、1 個の BTL と (...)
ユーザー ガイド: PDF
評価ボード

TPA3245EVM — TPA3245 115W ステレオ / 230W モノラル Ultra-HD アナログ入力 Class-D オーディオ・モジュール

TPA3245EVM PurePath™ Ultra-HD は、TI の TPA3245DDV 集積回路のための評価モジュールです。TPA3245DDV は高効率 Class-D 技術を使用した高性能 Class-D アンプで、真のプレミアム音質を実現します。先進的な統合型フィードバック設計と高速ゲート・ドライバ誤り訂正機能(PurePath™ Ultra-HD)を採用しており、全オーディオ帯域で超低歪と優れた音質を実現します。  2 個の BTL(ステレオ 2.0)出力チャネル、1 個の PBTL(モノラル 0.1)出力チャネル、1 個の BTL と 2 (...)
ユーザー ガイド: PDF
シミュレーション・モデル

LM5010A PSpice Transient Model

SNVM493.ZIP (39 KB) - PSpice Model
シミュレーション・モデル

LM5010A Unencrypted PSpice Transient Model

SNVM976.ZIP (4 KB) - PSpice Model
計算ツール

LM5010QUICK-CALC — LM5010 クイック・スタート・カリキュレータ

シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

PMP10812 — クラス 2 非絶縁型 PoE 降圧コンバータ(5V/1A)のリファレンス・デザイン

The PMP10812 reference design is ideal for Class 2 PoE PD applications that do not require isolation.  The TPS2378 PD controller provides the interface to the PSE.  The LM5010 buck converter has an integrated high side FET and external low side diode rectifier for low cost.
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 14 オプションの表示
WSON (DPR) 10 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ