ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ PWM コントローラ

P チャネルまたは N チャネルのクランプ FET と CS (電流センス) リスタート・タイマ搭載、100V、アクティブ・クランプ電流モード PWM コントローラ

製品詳細

Topology Active-clamp forward Control mode Current Duty cycle (max) (%) 80 Switching frequency (max) (kHz) 1000 Features Current limiting, Dead time control, High-voltage startup, Leading edge blanking, Programmable max duty cycle, Programmable soft start, Supports NFET clamp, Supports PFET clamp, Synchronization pin UVLO thresholds on/off (V) Programmable/1.25V Operating temperature range (°C) -40 to 125 Rating Catalog Gate drive (typ) (A) 3 Vin (max) (V) 15
Topology Active-clamp forward Control mode Current Duty cycle (max) (%) 80 Switching frequency (max) (kHz) 1000 Features Current limiting, Dead time control, High-voltage startup, Leading edge blanking, Programmable max duty cycle, Programmable soft start, Supports NFET clamp, Supports PFET clamp, Synchronization pin UVLO thresholds on/off (V) Programmable/1.25V Operating temperature range (°C) -40 to 125 Rating Catalog Gate drive (typ) (A) 3 Vin (max) (V) 15
TSSOP (PW) 16 32 mm² 5 x 6.4 WSON (NHQ) 16 25 mm² 5 x 5
  • Current-Mode Control
  • Internal 100-V Start-Up Bias Regulator
  • 3-A Compound Main Gate Driver
  • High Bandwidth Optocoupler Interface
  • Programmable Line Undervoltage Lockout (UVLO)
    With Adjustable Hysteresis
  • Versatile Dual Mode Overcurrent Protection With
    Hiccup Delay Timer
  • Programmable Overlap or Deadtime between the
    Main and Active Clamp Outputs
  • Programmable Maximum Duty Cycle Clamp
  • Programmable Soft-Start
  • Leading Edge Blanking
  • Resistor Programmed 1-MHz Capable Oscillator
  • Oscillator Sync I/O Capability
  • Precision 5-V Reference
  • Current-Mode Control
  • Internal 100-V Start-Up Bias Regulator
  • 3-A Compound Main Gate Driver
  • High Bandwidth Optocoupler Interface
  • Programmable Line Undervoltage Lockout (UVLO)
    With Adjustable Hysteresis
  • Versatile Dual Mode Overcurrent Protection With
    Hiccup Delay Timer
  • Programmable Overlap or Deadtime between the
    Main and Active Clamp Outputs
  • Programmable Maximum Duty Cycle Clamp
  • Programmable Soft-Start
  • Leading Edge Blanking
  • Resistor Programmed 1-MHz Capable Oscillator
  • Oscillator Sync I/O Capability
  • Precision 5-V Reference

The LM5026 PWM controller contains all of the features necessary to implement power converters utilizing the active clamp and reset technique with current-mode control. With the active clamp technique, higher efficiencies and greater power densities can be realized compared to conventional catch winding or RDC clamp and reset techniques. Two control outputs are provided, the main power switch control (OUT_A) and the active clamp switch control (OUT_B). The device can be configured to control either a P-Channel or N-Channel clamp switch. The main gate driver features a compound configuration, consisting of both MOS and Bipolar devices, providing superior gate drive characteristics. The LM5026 can be configured to operate with bias voltages over a wide input range of 8 V to 100 V. Additional features include programmable maximum duty cycle, line undervoltage lockout, cycle-by-cycle current limit, hiccup mode fault operation with adjustable timeout delay, PWM slope compensation, soft-start, 1-MHz capable oscillator with synchronization input and output capability, precision reference, and thermal shutdown.

The LM5026 PWM controller contains all of the features necessary to implement power converters utilizing the active clamp and reset technique with current-mode control. With the active clamp technique, higher efficiencies and greater power densities can be realized compared to conventional catch winding or RDC clamp and reset techniques. Two control outputs are provided, the main power switch control (OUT_A) and the active clamp switch control (OUT_B). The device can be configured to control either a P-Channel or N-Channel clamp switch. The main gate driver features a compound configuration, consisting of both MOS and Bipolar devices, providing superior gate drive characteristics. The LM5026 can be configured to operate with bias voltages over a wide input range of 8 V to 100 V. Additional features include programmable maximum duty cycle, line undervoltage lockout, cycle-by-cycle current limit, hiccup mode fault operation with adjustable timeout delay, PWM slope compensation, soft-start, 1-MHz capable oscillator with synchronization input and output capability, precision reference, and thermal shutdown.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
LM5025 アクティブ P チャネルまたは N チャネルのクランプ FET 搭載、0.25V の CS (電流センス) スレッショルド、90V、アクティブ・クランプ電圧モード PWM コントローラ Lower 1ku price

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
4 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM5026 Active Clamp Current Mode PWM Controller データシート (Rev. E) PDF | HTML 2015年 11月 30日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
EVM ユーザー ガイド (英語) AN-1387 LM5026 Evaluation Board (Rev. A) 2013年 5月 6日
アプリケーション・ノート アクティブ・クランプ・フォワード電源コンバータの動作と特長 英語版 2007年 3月 22日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM5026EVAL — アクティブ・クランプ電流モード PWM コントローラ

LM5026 Active Clamp Current Mode PWM Controller

ユーザー ガイド: PDF
シミュレーション・モデル

LM5026 Unencrypted PSpice Transient Model

SNVM015.ZIP (896 KB) - PSpice Model
リファレンス・デザイン

PMP22075 — 9V ~ 60V の広い入力電圧範囲に対応する、高効率、12V、5A のアクティブ・クランプ・フォワードのリファレンス・デザイン

このフォワード・コンバータ・リファレンス・デザインは、絶縁型 60W を供給する 12V の中間バス電圧レールを想定した設計を採用しています。このデザインは、9V ~ 60V の広い入力範囲で動作します。また、このデザインは、100V のアクティブ・クランプ電流モード PWM コントローラである LM5026 を採用しています。高効率を目的とし、自己駆動型の 2 次側整流器を、 4A と 8A を出力するドライバである UCC27511 と組み合わせて使用しています。高効率とヒカップ保護機能を必要とする絶縁型電源アプリケーションで、このデザインを使用することもできます。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP11478 — 30W アクティブ・クランプ・フォワード・コンバータのリファレンス・デザイン

PMP11478 is an isolated active clamp forward converter accepts a voltage range of 24-36V and delivers a 12V output at 2.5A. This design uses the LM5026 active clamp current-mode controller. Output voltage regulation is maintained using an LMV431 shunt regulator and opto-coupler feedback. Schottky (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP7895 — 12Vin+/-10%、12Vout @ 1A アクティブ・リセット・フライバック・コンバータ、リファレンス・デザイン

PMP7895 は、アクティブ・リセット・フライバック・コンバータのリファレンス・デザインです。  このデザインは、12V±10% の入力電圧を受け入れ、負荷に対して 1A の電流を供給できる 12V を出力します。
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
TSSOP (PW) 16 オプションの表示
WSON (NHQ) 16 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ