ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ PWM コントローラ

高電圧デュアル・インターリーブ電流モード・コントローラ

LM5032 は生産中止予定です
以下の代替品のいずれかをご検討ください。
open-in-new 代替品と比較
比較対象デバイスと類似の機能
LM5034 アクティブ P チャネル FET 搭載、100V、デュアル・インターリーブ・アクティブ・クランプ電流モード・コントローラ Replacement

製品詳細

Topology Boost, Flyback Control mode Current Duty cycle (max) (%) 80 Switching frequency (max) (kHz) 2000 Features Adjustable switching frequency, Current limiting, High-voltage startup, Multi-topology, Programmable max duty cycle, Synchronization pin UVLO thresholds on/off (V) Programmable/1.25V Operating temperature range (°C) -40 to 125 Rating Catalog Gate drive (typ) (A) 2.5 Vin (max) (V) 15
Topology Boost, Flyback Control mode Current Duty cycle (max) (%) 80 Switching frequency (max) (kHz) 2000 Features Adjustable switching frequency, Current limiting, High-voltage startup, Multi-topology, Programmable max duty cycle, Synchronization pin UVLO thresholds on/off (V) Programmable/1.25V Operating temperature range (°C) -40 to 125 Rating Catalog Gate drive (typ) (A) 2.5 Vin (max) (V) 15
TSSOP (PW) 16 32 mm² 5 x 6.4
  • Two Independent PWM Current Mode Controllers
  • Integrated High-Voltage Startup Regulator
  • Compound 2.5-A Main Output Gate Drivers
  • Single Resistor Oscillator Setting to 2 MHz
  • Synchronizable Oscillator
  • Programmable Maximum Duty Cycle
  • Maximum Duty Cycle Fold-Back at High-Line Voltage
  • Adjustable Timer for Hiccup Mode Current Limiting
  • Integrated Slope Compensation
  • Adjustable Line Undervoltage Lockout
  • Independently Adjustable Soft-Start (Each Regulator)
  • Direct Interface with Opto-Coupler Transistor
  • Thermal Shutdown
  • TSSOP 16-Pin Package
  • Two Independent PWM Current Mode Controllers
  • Integrated High-Voltage Startup Regulator
  • Compound 2.5-A Main Output Gate Drivers
  • Single Resistor Oscillator Setting to 2 MHz
  • Synchronizable Oscillator
  • Programmable Maximum Duty Cycle
  • Maximum Duty Cycle Fold-Back at High-Line Voltage
  • Adjustable Timer for Hiccup Mode Current Limiting
  • Integrated Slope Compensation
  • Adjustable Line Undervoltage Lockout
  • Independently Adjustable Soft-Start (Each Regulator)
  • Direct Interface with Opto-Coupler Transistor
  • Thermal Shutdown
  • TSSOP 16-Pin Package

The LM5032 dual current mode PWM controller contains all the features needed to control either two independent forward dc/dc converters or a single high current converter comprised of two interleaved power stages. The two controller channels operate 180° out of phase thereby reducing input ripple current. The LM5032 includes a startup regulator that operates over a wide input range up to 100 V and compound (bipolar + CMOS) gate drivers that provide a robust 2.5-A peak sink current. The adjustable maximum PWM duty cycle reduce stress on the primary side MOSFET switches. Additional features include programmable line undervoltage lockout, cycle-by-cycle current limit, hiccup mode fault operation with adjustable response time, PWM slope compensation, soft-start, and a 2-MHz capable oscillator with synchronization capability.

For all available packages, see the orderable addendum at the end of the datasheet.

The LM5032 dual current mode PWM controller contains all the features needed to control either two independent forward dc/dc converters or a single high current converter comprised of two interleaved power stages. The two controller channels operate 180° out of phase thereby reducing input ripple current. The LM5032 includes a startup regulator that operates over a wide input range up to 100 V and compound (bipolar + CMOS) gate drivers that provide a robust 2.5-A peak sink current. The adjustable maximum PWM duty cycle reduce stress on the primary side MOSFET switches. Additional features include programmable line undervoltage lockout, cycle-by-cycle current limit, hiccup mode fault operation with adjustable response time, PWM slope compensation, soft-start, and a 2-MHz capable oscillator with synchronization capability.

For all available packages, see the orderable addendum at the end of the datasheet.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
5 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM5032 High-Voltage Dual Interleaved Current Mode Controller データシート (Rev. B) PDF | HTML 2014年 12月 15日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
アプリケーション・ノート AN-1820 LM5032 Interleaved Boost Converter (Rev. A) 2013年 5月 6日
EVM ユーザー ガイド (英語) AN-1962 LM5032 Interleaved Boost Evaluation Board (Rev. A) 2013年 5月 6日
アプリケーション・ノート 電流モード制御の内側を探る 2007年 3月 22日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM5032EVAL — LM5032 インターリーブ昇圧、評価ボード

A two phase interleaved boost implementation for increased output power and reduced ripple.

ユーザー ガイド: PDF
リファレンス・デザイン

TIDA-00200 — 120V AC 入力 200W、インターリーブ・フライバック、バッテリ充電アプリケーション用

TIDA-00200 は、必要とする出力電力レベルが約 200W で部品表 (BOM) を最小化したバッテリ・チャージャ・アプリケーションに適した、インターリーブ形式のフライバック・トポロジーを提示します。実際の各種電子部品に加えて、冷却に関連する労力も、全体的な設計コストの大きな寄与要因です。高電圧デュアル・インターリーブ電流モード・コントローラである LM5032 を活用することで、このデザインは全負荷時に 90% (...)
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
TSSOP (PW) 16 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ