ホーム パワー・マネージメント パワー・スイッチ eFuse とホット・スワップ・コントローラ

5.5V ~ 65V、ハイサイド保護コントローラ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと類似の機能
NEW TPS4800-Q1 プレビュー Automotive 100-V low IQ high side driver with protection and diagnostics Wider operating input voltage range, current monitoring, short circuit protection and lower disable mode shutdown current

製品詳細

FET External Vin (min) (V) 5.5 Vin (max) (V) 65 Vabsmax_cont (V) 75 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response current limiting Fault response Latch-off Soft start Adjustable Overvoltage response Cut-off Features Fault output, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection
FET External Vin (min) (V) 5.5 Vin (max) (V) 65 Vabsmax_cont (V) 75 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response current limiting Fault response Latch-off Soft start Adjustable Overvoltage response Cut-off Features Fault output, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection
VSSOP (DGS) 10 14.7 mm² 3 x 4.9
  • Available in Automotive Grade / AEC Q-100
  • Wide operating input voltage range:
    5.5 V to 65 V
  • Functional safety capable
    • Documentation available to aid functional safety system design
  • Less than 15-µA quiescent current in disabled mode
  • Controlled output rise time for safe connection of capacitive loads
  • Charge pump gate driver for external N-Channel MOSFET
  • Adjustable Undervoltage Lockout (UVLO) with hysteresis
  • UVLO Serves as second enable input for systems requiring safety redundancy
  • Programmable fault detection delay time
  • MOSFET latched off after load fault is detected
  • Active low open drain POWER GOOD (nPGD) output
  • Adjustable input Overvoltage Protection (OVP)
  • Immediate restart after overvoltage shutdown
  • 10-Lead VSSOP
  • Available in Automotive Grade / AEC Q-100
  • Wide operating input voltage range:
    5.5 V to 65 V
  • Functional safety capable
    • Documentation available to aid functional safety system design
  • Less than 15-µA quiescent current in disabled mode
  • Controlled output rise time for safe connection of capacitive loads
  • Charge pump gate driver for external N-Channel MOSFET
  • Adjustable Undervoltage Lockout (UVLO) with hysteresis
  • UVLO Serves as second enable input for systems requiring safety redundancy
  • Programmable fault detection delay time
  • MOSFET latched off after load fault is detected
  • Active low open drain POWER GOOD (nPGD) output
  • Adjustable input Overvoltage Protection (OVP)
  • Immediate restart after overvoltage shutdown
  • 10-Lead VSSOP

The LM5060 high-side protection controller provides intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. In-rush current is controlled by the nearly constant rise time of the output voltage. A POWER GOOD output indicates when the output voltage reaches the input voltage and the MOSFET is fully on. Input UVLO (with hysteresis) is provided as well as programmable input OVP. An enable input provides remote on or off control. The programmable UVLO input can be used as second enable input for safety redundancy. A single capacitor programs the initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time. When a detected fault condition persists longer than the allowed fault delay time, the MOSFET is latched off until either the enable input or the UVLO input is toggled low and then high.

The LM5060 high-side protection controller provides intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. In-rush current is controlled by the nearly constant rise time of the output voltage. A POWER GOOD output indicates when the output voltage reaches the input voltage and the MOSFET is fully on. Input UVLO (with hysteresis) is provided as well as programmable input OVP. An enable input provides remote on or off control. The programmable UVLO input can be used as second enable input for safety redundancy. A single capacitor programs the initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time. When a detected fault condition persists longer than the allowed fault delay time, the MOSFET is latched off until either the enable input or the UVLO input is toggled low and then high.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
LM5060-Q1 アクティブ 車載、5.5V ~ 65V、ハイサイド保護コントローラ This product is the automotive qualified version.
比較対象デバイスと類似の機能
LM7480-Q1 アクティブ 車載、3V ~ 65V、複数の双方向 NFET を駆動、理想ダイオード・コントローラ This product offers lower Iq, lower voltage support and a higher gate drive to support higher power applications.
TPS1663 アクティブ 出力電力制限機能搭載、4.5V ~ 60V、31mΩ、0.6 ~ 6A eFuse Need a smaller solution? This device offers an integrated FET to reduce the solution size for 24V/6A applications.
TPS2660 アクティブ 入力逆極性保護機能内蔵、4.2V ~ 60V、150mΩ、0.1 ~ 2.23A eFuse Need a smaller solution? This device offers integrated back-to-back FETs to reduce the solution size for 24V/2A applications.

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
5 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM5060 High-Side Protection Controller With Low Quiescent Current データシート (Rev. H) PDF | HTML 2019年 12月 23日
e-Book(PDF) 11 Ways to Protect Your Power Path(英語) 英語版 2020年 10月 30日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
EVM ユーザー ガイド (英語) AN-2000 LM5060EVAL Evaluation Board (Rev. C) 2013年 5月 6日
アプリケーション・ノート Surge Stopping and Reverse Voltage Protection with the LM5069 2013年 4月 11日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM5060EVAL — LM5060 評価ボード

The LM5060 evaluation board is designed to demonstrate the capabilities of the LM5060 high side protection controller with low quiescent current. It is intended for evaluation of the functions of the LM5060. One high side N-channel power MOSFET is used. The evaluation board is designed to highlight (...)

ユーザー ガイド: PDF
開発キット

EVMK2GX — 66AK2Gx 1GHz 評価モジュール

EVMK2GX(「K2G」とも呼ぶ)1GHz 評価モジュール(EVM)は 66AK2Gx プロセッサ・ファミリの迅速な評価のほか、オーディオ、産業用モーター制御、スマート・グリッド保護、高信頼性リアルタイム・コンピューティング集約型アプリケーションの迅速な開発を可能にします。  既存の KeyStone ベース SoC デバイスと同様に、66AK2Gx の DSP と ARM コアがシステム内のメモリとペリフェラルをすべて制御します。こうしたアーキテクチャは DSP または ARM を中心としたシステム設計を可能にし、ソフトウェアのフレキシビリティを最大限に高めます。

この EVM は (...)

ユーザー ガイド: PDF
開発キット

EVMK2GXS — 66AK2Gx(K2G)1GHz 高度セキュリティの評価モジュール

The K2G 1GHz High Secure Evaluation Module (EVM) enables developers to start  evaluating and testing the programming of the  high secure developmental version of the  66AK2Gx processor, and to accelerate the next stage of secure boot product development of audio and industrial real (...)

ユーザー ガイド: PDF
シミュレーション・モデル

LM5060 TINA-TI Reference Design (Rev. A)

SNVMA08A.TSC (153 KB) - TINA-TI Reference Design
シミュレーション・モデル

LM5060 TINA-TI Transient Spice Model (Rev. A)

SNVMA09A.ZIP (26 KB) - TINA-TI Spice Model
シミュレーション・モデル

LM5060 Unencrypted PSpice Transient Model Package (Rev. B)

SLIM321B.ZIP (77 KB) - PSpice Model
計算ツール

SLVC667 LM5060 Design Calculator

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
eFuse とホット・スワップ・コントローラ
LM5060 5.5V ~ 65V、ハイサイド保護コントローラ LM5060-Q1 車載、5.5V ~ 65V、ハイサイド保護コントローラ
計算ツール

TVS-RECOMMENDATION-CALC TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

こちらの設計リソースは、このカテゴリに属する製品の大半をサポートしています。

サポート状況を確認するには、製品の詳細ページをご覧ください。

シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

PMP22125 — Battery back-up switch, charger and monitor reference design

このリファレンス・デザインは、バッテリ・バックアップ、チャージャ、監視の包括的な機能を実装します。  このデザインの搭載機能は、12/24Vdc の電力供給源と 12/24V 鉛酸バッテリの間での切り替え、代表値 1A の定電流によるバッテリ充電、バッテリ・メンテナンス目的のフロート式充電、バッテリと電力入力源向けの監視回路です。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP40182 — 双方向バッテリ初期化システム電源ボードのリファレンス・デザイン

This reference design is a battery initialization reference design solution for automotive and battery applications. The module enables a high efficiency single stage conversion for charging and discharging the battery. This design features a 0.1% accurate current control loop using the high (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP10260 — 24Vdc 入力(ダブルの自動車バッテリ)オートモーティブ多相同期整流降圧、リファレンス・デザイン

This high-efficiency, high-power reference design uses the LM5119 two-phase synchronous-buck controller to regulate 14.4V at 60A. This design can be used to supply single car battery power from a double battery system, often found in trucks. Features include input EMI filtering, output hot swap (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VSSOP (DGS) 10 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ