I2C/SMBus インターフェイス搭載、精度 2℃、業界標準の温度センサ

製品詳細

Local sensor accuracy (max) 2 Type Local Operating temperature range (°C) -55 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, UL recognized Supply current (max) (µA) 500 Temp resolution (max) (Bits) 9 Remote channels (#) 0 Addresses 8 Rating Catalog
Local sensor accuracy (max) 2 Type Local Operating temperature range (°C) -55 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, UL recognized Supply current (max) (µA) 500 Temp resolution (max) (Bits) 9 Remote channels (#) 0 Addresses 8 Rating Catalog
SOIC (D) 8 29.4 mm² 4.9 x 6 VSSOP (DGK) 8 14.7 mm² 3 x 4.9

  • No external components required
  • Shutdown mode to minimize power consumption
  • Up to eight LM75As can be connected to a single bus
  • Power up defaults permit stand-alone operation as thermostat

  • Key Specifications

    Supply Voltage LM75A 2.7V to 5.5V
    Supply Current operating 280 μA (typ)
      shutdown 4 μA (typ)
    Temperature Accuracy −25°C to 100°C ±2°C (max)
      −55°C to 125°C ±3°C (max)

  • No external components required
  • Shutdown mode to minimize power consumption
  • Up to eight LM75As can be connected to a single bus
  • Power up defaults permit stand-alone operation as thermostat

  • Key Specifications

    Supply Voltage LM75A 2.7V to 5.5V
    Supply Current operating 280 μA (typ)
      shutdown 4 μA (typ)
    Temperature Accuracy −25°C to 100°C ±2°C (max)
      −55°C to 125°C ±3°C (max)

    The LM75A is an industry-standard digital temperature sensor with an integrated Sigma-Delta analog-to-digital converter and I 2C interface. The LM75A provides 9-bit digital temperature readings with an accuracy of ±2°C from -25°C to 100°C and ±3°C over -55°C to 125°C.

    The LM75A operates with a single supply from +2.7V to +5.5V. Communication is accomplished over a 2-wire interface which operates up to 400kHz. The LM75A has three address pins, allowing up to eight LM75A devices to operate on the same 2-wire bus. The LM75A has a dedicated over-temperature output (O.S.) with programmable limit and hysteresis. This output has programmable fault tolerance, which allows the user to define the number of consecutive error conditions that must occur before O.S. is activated.

    The wide temperature and supply range and I 2C interface make the LM75A ideal for a number of applications including base stations, electronic test equipment, office electronics, personal computers, and any other system where thermal management is critical to performance. The LM75A is available in an SOP-8 package and an MSOP-8 package.


    The LM75A is an industry-standard digital temperature sensor with an integrated Sigma-Delta analog-to-digital converter and I 2C interface. The LM75A provides 9-bit digital temperature readings with an accuracy of ±2°C from -25°C to 100°C and ±3°C over -55°C to 125°C.

    The LM75A operates with a single supply from +2.7V to +5.5V. Communication is accomplished over a 2-wire interface which operates up to 400kHz. The LM75A has three address pins, allowing up to eight LM75A devices to operate on the same 2-wire bus. The LM75A has a dedicated over-temperature output (O.S.) with programmable limit and hysteresis. This output has programmable fault tolerance, which allows the user to define the number of consecutive error conditions that must occur before O.S. is activated.

    The wide temperature and supply range and I 2C interface make the LM75A ideal for a number of applications including base stations, electronic test equipment, office electronics, personal computers, and any other system where thermal management is critical to performance. The LM75A is available in an SOP-8 package and an MSOP-8 package.


    ダウンロード 字幕付きのビデオを表示 ビデオ

    お客様が関心を持ちそうな類似品

    open-in-new 代替品と比較
    比較対象デバイスにアップグレード機能を搭載した、ドロップ・イン代替製品
    TMP1075 アクティブ 業界標準の LM75 / TMP75 に対する性能アップグレード、1℃ の精度、I²C 対応温度センサ This product is a digital temperature sensor with improved accuracy (±1°C) and lower max current consumption (4µA)
    比較対象デバイスと同等の機能で、ピン配置が異なる製品
    NEW TMP110 プレビュー アラート機能搭載、小型 X2SON パッケージ封止、精度 ±1.0℃ の I²C 温度センサ Device for cost-optimized designs, with improved accuracy (±1.0°C | max), similar register map, wider VCC range (1.14 to 5.5V), in a smaller X2SON-5 package (0.8 × 0.8mm)

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    7 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート LM75A Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interfa(jp) データシート (Rev. M 翻訳版) 最新英語版 (Rev.P) PDF | HTML 2010年 11月 2日
    アプリケーション・ノート LM75B and TMP1075 Industry-Standard Devices: Design Guidelines and Spec Comparison (Rev. A) PDF | HTML 2024年 3月 7日
    アプリケーション・ノート Temperature sensors: PCB guidelines for surface mount devices (Rev. A) 2019年 1月 18日
    アプリケーション・ノート Applying I2C-Compatible Temperature Sensors in Systems With Slow Clock Edges (Rev. A) 2013年 5月 6日
    ユーザー・ガイド LM75A User’s Guide 2013年 1月 17日
    ユーザー・ガイド LM75AEB User’s Guide (Rev. A) 2012年 8月 24日
    アプリケーション・ノート Tiny Temperature Sensors for Remote Systems 2003年 2月 17日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    ドライバまたはライブラリ

    LM75SW-LINUX — Linux ドライバ、LM75 用

    この Linux ドライバは、LM75 互換の各種温度センサをサポートしています。また、この Linux ドライバは I2C バス経由の通信をサポートしており、ハードウェア監視サブシステムとのインターフェイスとして機能します。
    Linux のメインライン・ステータス

    Linux メインラインで利用可能か:はい
    git.ti.com から入手可能か:N/A

    サポート対象デバイス:
    • LM75A
    • TMP100
    • TMP101
    • TMP105
    • TMP112
    • TMP175
    • TMP275
    • TMP75
    • TMP1075
    Linux ソース・ファイル

    このデバイスに関連付けられているファイル:

    1. drivers/hwmon/lm75.c
    2. (...)
    サポート・ソフトウェア

    SENSOREVAL Eval Board Software For Hardware Monitors And Digital Temperature Sensors

    SensorEval
    SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

    • Download SensorEval Software and Manual
    • Windows XP support is offered for (...)
    サポート対象の製品とハードウェア

    サポート対象の製品とハードウェア

    製品
    デジタル温度センサ
    LM63 ファン制御機能搭載、1 個のリモート / ローカル温度センサ LM64 ファン制御機能と 5 個の GPIO 搭載、1 個のリモート / ローカル温度センサ LM71 SPI インターフェイス搭載、±1.5℃、温度センサ LM71-Q1 車載グレード、SPI インターフェイス搭載、±1.5℃、温度センサ LM73 I2C/SMBus インターフェイス搭載、±1℃、温度センサ LM75A I2C/SMBus インターフェイス搭載、精度 2℃、業界標準の温度センサ LM86 SMBus インターフェイス搭載、±0.75℃、リモート / ローカル温度センサ LM89 SMBus インターフェイス搭載、バス共有向けの 2 個のアドレス使用、±0.75℃、リモート / ローカル温度センサ LM90 SMBus インターフェイス搭載、リモート / ローカル温度センサ LM93 ハードウェア・モニタと 16 個の電源電圧モニタ搭載、2 個のリモートと 1 個のローカル温度センサ LM95010 SensorPath インターフェイス搭載、±2℃、温度センサ LM95071 SPI インターフェイス搭載、±1℃、温度センサ LM95172-Q1 車載グレード、200℃ に対応、SPI インターフェイス搭載、±1℃、温度センサ LM95214 SMBus インターフェイス搭載、±2℃、クワッド、リモート / ローカル温度センサ LM95221 ベータ補償機能と SMBus/I2C インターフェイス搭載、±3℃、デュアル、リモート / ローカル温度センサ LM95231 TruTherm テクノロジー採用、SMBus インターフェイス搭載、デュアル、リモート / ローカル温度センサ LM95233 TruTherm テクノロジー採用、SMBus インターフェイス搭載、±2℃、デュアル、リモート / ローカル温度センサ LM95234 TruTherm テクノロジー採用、SMBus インターフェイス搭載、±2℃、クワッド、リモート / ローカル温度センサ LM95235 SMBus とベータ補償機能搭載、65/90nm ダイオード向け、±0.75℃、リモート / ローカル温度センサ LM95235-Q1 車載グレード、TruTherm テクノロジー採用、SMBus 搭載、±2℃、リモート / ローカル温度センサ LM95241 ベータ補償機能と SMBus/I2C インターフェイス搭載、±1.25℃、デュアル、リモート /ローカル温度センサ LM95245 SMBus とベータ補償機能搭載、45nm ダイオード向け、±0.75℃、リモート / ローカル温度センサ LM96000 ファン制御機能と 6 個の電源電圧モニタ搭載、ハードウェア・モニタ LM96080 ファン速度モニタと電源電圧モニタ搭載、1 個のローカル温度センサ LM96163 ベータ補償機能とファンの速度制御機能搭載、1 個のリモート / ローカル温度センサ LM99 TruTherm テクノロジー採用、SMBus インターフェイス搭載、デュアル、リモート / ローカル温度センサ
    高精度 ADC
    ADC128D818 温度センサと I2C インターフェイス搭載、内部と外部の電圧リファレンスに対応、12 ビット、82SPS、8 チャネル・デルタ・シグマ ADC
    シミュレーション・モデル

    LM75A IBIS Model

    SNOM549.ZIP (33 KB) - IBIS Model
    パッケージ ピン数 ダウンロード
    SOIC (D) 8 オプションの表示
    VSSOP (DGK) 8 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ