2.7V, 650µA, 55MHz Rail-to-Rail Input and Output Amplifiers with Shutdown Option - LMH6646

LMH6646 (供給中)

2.7V, 650µA, 55MHz Rail-to-Rail Input and Output Amplifiers with Shutdown Option

 

推奨代替製品

  • LMH6612  -  シングル電源 RRO オペ・アンプ
  • LM8262  -  デュアル RRIO 高出力電流、無制限の容量性負荷オペ・アンプ、MSOP パッケージ
  • LMH6658  -  シングル電源デュアル・オペ・アンプ

概要

The LMH™6645 (single) and LMH6646 (dual), rail-to-rail input and output voltage feedback amplifiers, offer high speed (55MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMH6647, single).

Input common mode voltage range exceeds either supply by 0.3V, enhancing ease of use in multitude of applications where previously only inferior devices could be used. Output voltage range extends to within 20mV of either supply rails, allowing wide dynamic range especially in low voltage applications. Even with low supply current of 650µA/amplifier, output current capability is kept at a respectable ±20mA for driving heavier loads. Important device parameters such as BW, Slew Rate and output current are kept relatively independent of the operating supply voltage by a combination of process enhancements and design architecture.

In portable applications, the LMH6647 provides shutdown capability while keeping the turn-off current to less than 50µA. Both turn-on and turn-off characteristics are well behaved with minimal output fluctuations during transitions. This allows the part to be used in power saving mode, as well as multiplexing applications. Miniature packages (SOT23, MSOP-8, and SO-8) are further means to ease the adoption of these low power high speed devices in applications where board area is at a premium.


特長

(VS = 2.7V, TA = 25°C, RL = 1k to V+/2, AV = +1. Typical values unless specified).

-3dB BW

55MHz

Supply voltage range

2.5V to 12V

Slew rate

22V/µs

Supply current

650µA/channel

Output short circuit current

42mA

Linear output current

±20mA

Input common mode voltage

0.3V beyond rails

Output voltage swing

20mV from rails 

Input voltage noise

17nV/

Input current noise

0.75pA/


詳細を表示

機能一覧 他の製品と比較 高速オペアンプ ( >=50 MHZ)

 
Architecture
Number of Channels (#)
Total Supply Voltage (Min) (+5V=5, +/-5V=10)
Total Supply Voltage (Max) (+5V=5, +/-5V=10)
BW @ Acl (MHz)
Acl, min spec gain (V/V)
Slew Rate (Typ) (V/us)
Vn at Flatband (Typ) (nV/rtHz)
Vn at 1kHz (Typ) (nV/rtHz)
Iq per channel (Typ) (mA)
Vos (Offset Voltage @ 25C) (Max) (mV)
Rail-to-Rail
Additional Features
Rating
Operating Temperature Range (C)
Package Group
Package Size: mm2:W x L (PKG)
CMRR (Typ) (dB)
Input Bias Current (Max) (pA)
Offset Drift (Typ) (uV/C)
GBW (Typ) (MHz)
Output Current (Typ) (mA)
2nd Harmonic (dBc)
3rd Harmonic (dBc)
@ MHz
LMH6646
Bipolar
Voltage FB   
2   
2.5   
12   
55   
1   
22   
17   
17   
0.725   
3   
In
Out   
N/A   
Catalog   
-40 to 85   
DIESALE
SOIC
VSSOP   
8VSSOP: 15 mm2: 4.9 x 3(VSSOP)
8SOIC: 29 mm2: 6 x 4.9(SOIC)   
84   
2000000   
5   
55   
20   
62   
72   
1   

主要ツールとソフトウェア

WEBENCH® Designer LMH6646

Amplifier Topology
 Non-inverting
 Inverting
Desired Power Supply Voltage
Positive Supply (Vcc):  V
Negative Supply (Vee):  V
Allowed Power Supply(Vcc-Vee) = 2.5 to 12.0 V
Desired Input and Output Requirements
  Min Max
Vin  V  V
Vout  V  V
Minimum Temperature = -40.0 °C
Maximum Temperature = 85.0 °C