ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

LMR14030

アクティブ

40μA の静止電流 (IQ)、SIMPLE SWITCHER® 40V、3.5A、2.2MHz、降圧コンバータ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LMR33630 アクティブ SIMPLE SWITCHER® 3.8V ~ 36V、3A 同期整流・降圧コンバータ、超低 EMI Smaller footprint, higher efficiency, lower IQ and lower EMI.

製品詳細

Vin (min) (V) 4 Vin (max) (V) 40 Vout (min) (V) 1 Vout (max) (V) 36 Iout (max) (A) 3.5 Iq (typ) (mA) 0.04 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2500 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
Vin (min) (V) 4 Vin (max) (V) 40 Vout (min) (V) 1 Vout (max) (V) 36 Iout (max) (A) 3.5 Iq (typ) (mA) 0.04 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2500 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
HSOIC (DDA) 8 29.4 mm² 4.9 x 6
  • 4 V to 40 V Input Range
  • 3.5 A Continuous Output Current
  • Ultra-low 40 µA Operating Quiescent Current
  • 90 mΩ High-Side MOSFET
  • Minimum Switch-On Time: 75 ns
  • Current Mode Control
  • Adjustable Switching Frequency from 200 kHz to
    2.5 MHz
  • Frequency Synchronization to External Clock
  • Internal Compensation for Ease of Use
  • High Duty Cycle Operation Supported
  • Precision Enable Input
  • 1 µA Shutdown Current
  • External Soft-start
  • Thermal, Overvoltage and Short Protection
  • 8-Pin HSOIC with PowerPAD™ Package
  • 4 V to 40 V Input Range
  • 3.5 A Continuous Output Current
  • Ultra-low 40 µA Operating Quiescent Current
  • 90 mΩ High-Side MOSFET
  • Minimum Switch-On Time: 75 ns
  • Current Mode Control
  • Adjustable Switching Frequency from 200 kHz to
    2.5 MHz
  • Frequency Synchronization to External Clock
  • Internal Compensation for Ease of Use
  • High Duty Cycle Operation Supported
  • Precision Enable Input
  • 1 µA Shutdown Current
  • External Soft-start
  • Thermal, Overvoltage and Short Protection
  • 8-Pin HSOIC with PowerPAD™ Package

The LMR14030 is a 40 V, 3.5 A step down regulator with an integrated high-side MOSFET. With a wide input range from 4 V to 40 V, it’s suitable for various applications from industrial to automotive for power conditioning from unregulated sources. The regulator’s quiescent current is 40 µA in Sleep-mode, which is suitable for battery powered systems. An ultra-low 1 µA current in shutdown mode can further prolong battery life. A wide adjustable switching frequency range allows either efficiency or external component size to be optimized. Internal loop compensation means that the user is free from the tedious task of loop compensation design. This also minimizes the external components of the device. A precision enable input allows simplification of regulator control and system power sequencing. The device also has built-in protection features such as cycle-by-cycle current limit, thermal sensing and shutdown due to excessive power dissipation, and output overvoltage protection.

The LMR14030 is a 40 V, 3.5 A step down regulator with an integrated high-side MOSFET. With a wide input range from 4 V to 40 V, it’s suitable for various applications from industrial to automotive for power conditioning from unregulated sources. The regulator’s quiescent current is 40 µA in Sleep-mode, which is suitable for battery powered systems. An ultra-low 1 µA current in shutdown mode can further prolong battery life. A wide adjustable switching frequency range allows either efficiency or external component size to be optimized. Internal loop compensation means that the user is free from the tedious task of loop compensation design. This also minimizes the external components of the device. A precision enable input allows simplification of regulator control and system power sequencing. The device also has built-in protection features such as cycle-by-cycle current limit, thermal sensing and shutdown due to excessive power dissipation, and output overvoltage protection.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LMR33640 アクティブ SIMPLE SWITCHER® 3.8V ~ 36V、4A 降圧コンバータ、SOIC-8 パッケージ Next-generation 3.8-V to 36-V, 4-A step-down converter in SOIC-8 package.
LMR51430 アクティブ 40μA の静止電流 (IQ)、SIMPLE SWITCHER®、4.5V ~ 36V、3A 同期整流降圧コンバータ Lower Vin voltage, synchronous solution, SOT23-6 package for personal electronics and industrial applications

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
12 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LMR14030 SIMPLE SWITCHER® 40 V 3.5 A, 2.2 MHz Step-Down Converter with 40 µA IQ データシート (Rev. A) PDF | HTML 2015年 4月 9日
アプリケーション・ノート Simple Solution for EMI Filter Stability Issue in DC/DC Converters (Rev. A) 2019年 4月 25日
アプリケーション・ノート How to Evaluate Junction Temperature Properly with Thermal Metrics (Rev. B) 2019年 3月 29日
アプリケーション・ノート How SYNC Logic Affects EMI Performance for Dual-Channel Buck Converters 2018年 4月 27日
アプリケーション・ノート Design Feedforward Capacitor for LMR14020 2017年 12月 20日
アプリケーション・ノート How to Evaluate the Maximum Inductor in Internal Compensation PCM Buck Converter 2017年 9月 20日
アプリケーション・ノート Extending Buck Regulator to Positive Buck-Boost Configuration 2017年 9月 2日
アプリケーション・ノート AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013年 4月 24日
アプリケーション・ノート AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013年 4月 23日
アプリケーション・ノート AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013年 4月 23日
その他の技術資料 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005年 7月 12日
アプリケーション・ノート AN-643 EMI/RFI Board Design (Rev. B) 2004年 5月 3日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LMR14030SEVM — LMR14030SEVM 7V ~ 36V 入力、3.5A 時 5.0/3.3V 出力降圧コンバータ

The LMR14030SEVM is a fully assembled and tested circuit for evaluating the LMR14030S Step-Down Converter. The LMR14030SEVM operates from 7V to 36V input (12V nominal) and provides a 5.0V or 3.3V output at 3.5A. The board also has jumper connectors to enable or disable the converter operation, (...)

ユーザー ガイド: PDF
評価ボード

TPS254900AQ1EVM — LMR14030 3.5A 降圧レギュレータを使用する TPS254900A-Q1 評価モジュール

The TPS254900AQ1 evaluation module (TPS254900AQ1EVM) contains evaluation and reference circuitry for the TPS254900AQ1, which is a USB charging controller and power switch, integrated VBUS and D+/D- short to battery protection, cable compensation, current monitor (IMON) and IEC ESD protection, which (...)
ユーザー ガイド: PDF
評価ボード

TPS254900Q1EVM-817 — LMR14030 3.5A 降圧レギュレータ付き TPS254900Q1 の評価モジュール

The TPS254900-Q1 evaluation module (TPS254900Q1EVM-817) contains evaluation and reference circuitry for the TPS254900-Q1, which is a USB charging controller and power switch, integrated VBUS and D+/D- short to battery protection, cable compensation, current monitor (IMON) and IEC ESD protection, (...)
ユーザー ガイド: PDF
シミュレーション・モデル

LMR14030S PSPICE Transient Model

SNVM707.ZIP (61 KB) - PSpice Model
シミュレーション・モデル

LMR14030S PSpice Average Model

SNVMBD5.ZIP (72 KB) - PSpice Model
シミュレーション・モデル

LMR14030S Unencrypted PSpice Transient Model

SNVM922.ZIP (6 KB) - PSpice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

PMP11594 — USB Type-C™ DFP 5V3A チャージャのリファレンス・デザイン

PMP11594 は、低コストの 5V 3A 自動車用チャージャのリファレンス・デザインであり、Type-C の DFP 機能を実現するほか、BC1.2 デバイスに準拠しています。このデザインは、非同期降圧レギュレータである LMR14030 と、高集積の USB Type-C コントローラである TPS25810 を搭載しています。PMP11594 は、高効率、良好なライン / ロード・レギュレーション、さらに良好な放熱特性を示します。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00845 — バッテリ短絡保護機能搭載、2 ポート 車載 USB 2.0 ハブのリファレンス・デザイン

TIDA-00845 は、デュアル・ポート USB 2.0 ハブであり、両方のダウンストリーム・ポートで最大 18V DC の短絡に耐える能力を搭載し、Level 4 IEC 61000-4-2 ESD、過電流の条件、グランドへの短絡のそれぞれに対する保護機能を実装しています。これらの保護機能を実現しているのは、統合型保護デバイスである TPD3S714-Q1 です。バッテリ短絡(short-to-battery、STB)保護、短絡保護、固定的な電流制限ロード・スイッチを両方のダウンストリーム・ポートに搭載した TUSB4020BI USB 2.0 (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-03026 — LED / 音声フィードバック搭載状態表示のリファレンス・デザイン

TIDA-03026 は、さまざまな最終機器で使用されているステータス表示サブシステムをエミュレートするためのリファレンス・デザインです。複数の LED ドライバの並列配置により、RGB LED アレイの点滅、パルス発光、脈動(光の変化)を同期化し、カスタマー・エクスペリエンスを向上します。オーディオ・フィードバック機能も統合されており、LED とオーディオを組み合わせたソリューションでステータスを表示できます。主なアプリケーションは、IP 電話、ビル・オートメーション、ホーム・オートメーション、白物家電、車載向けインフォテインメントとクラスタです。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00376 — ピエゾ・スピーカー・ストロボ通知リファレンス・デザイン

TIDA-00376 は、TI (テキサス・インスツルメンツ) の産業用ピエゾ・ドライバ、点滅 LED ドライバ、超低消費電力 FRAM マイコン (MCU) を使用して、聴覚と視覚両方の通知サブシステムを実装する方法を提示します。これらは主に、火災報知最終製品システムを意図しています。このリファレンス・デザインは、単一のピエゾ・トランスデューサを通じて複数の警報トーン周波数を出力するとともに、小さい入力電流を受け入れ、明るい光出力の LED ストローブを点灯させる方法を提示します。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HSOIC (DDA) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ