この製品には新バージョンがあります。
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LMR14050-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range
- Device HBM ESD Classification Level H1C
- Device CDM ESD Classification Level C4A - 4 V to 40 V Input Range
- 5 A Continuous Output Current
- Ultra-low 40 µA Operating Quiescent Current
- 90 mΩ High-Side MOSFET
- Minimum Switch-On Time: 75 ns
- Current Mode Control
- Adjustable Switching Frequency from 200 kHz to
2.5 MHz - Frequency Synchronization to External Clock
- Spread Spectrum Option for Reduced EMI
- Internal Compensation for Ease of Use
- High Duty Cycle Operation Supported
- Precision Enable Input
- 1 µA Shutdown Current
- External Soft-start
- Thermal, Overvoltage and Short Protection
- 8-Pin HSOIC with PowerPAD™ Package
The LMR14050-Q1 is a 40 V, 5 A step down regulator with an integrated high-side MOSFET. With a wide input range from 4 V to 40 V, its suitable for various applications from industrial to automotive for power conditioning from unregulated sources. An extended family is available in 2 A and 3.5 A options in pin-to-pin compatible packages, including LMR14020-Q1 and LMR14030-Q1. The regulators quiescent current is 40 µA in Sleep-mode, which is suitable for battery powered systems. An ultra-low 1 µA current in shutdown mode can further prolong battery life. A wide adjustable switching frequency range allows either efficiency or external component size to be optimized. Internal loop compensation means that the user is free from the tedious task of loop compensation design. This also minimizes the external components of the device. A precision enable input allows simplification of regulator control and system power sequencing. The device also has built-in protection features such as cycle-by-cycle current limit, thermal sensing and shutdown due to excessive power dissipation, and output overvoltage protection.
The LMR14050-Q1 is available in an 8-pin HSOIC or 10-pin WSON package with exposed pad for low thermal resistance.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | LMR14050-Q1 SIMPLE SWITCHER® 40 V, 5 A Step-Down Converter with 40 µA IQ データシート (Rev. A) | PDF | HTML | 2016年 2月 3日 | ||
アプリケーション・ノート | Reduce Conducted EMI in Automotive Buck Converter Applications | 2019年 7月 31日 | ||||
アプリケーション・ノート | How to Evaluate Junction Temperature Properly with Thermal Metrics (Rev. B) | 2019年 3月 29日 | ||||
アプリケーション・ノート | How SYNC Logic Affects EMI Performance for Dual-Channel Buck Converters | 2018年 4月 27日 | ||||
技術記事 | There are more ways than you think to reduce conducted EMI | PDF | HTML | 2018年 4月 17日 | |||
アプリケーション・ノート | Low Conducted EMI Power Solution for Automotive Digital Cockpit With LMR14050 an | 2018年 2月 7日 | ||||
アプリケーション・ノート | Design Feedforward Capacitor for LMR14020 | 2017年 12月 20日 | ||||
アプリケーション・ノート | How to Evaluate the Maximum Inductor in Internal Compensation PCM Buck Converter | 2017年 9月 20日 | ||||
EVM ユーザー ガイド (英語) | LMR14050QDPR EVM USer's Guide | 2016年 2月 8日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
LMR14050QDPREVM — LMR14050QDPR 広入力電圧降圧コンバータの評価モジュール
LMR14050SEVM — LMR14050SEVM 7V ~ 36V 入力、5A 時 5.0/3.3V 出力降圧コンバータ
The LMR14050SEVM is a fully assembled and tested circuit for evaluating the LMR14050S Step-Down Converter. The LMR14050SEVM operates from 7V to 36V input (12V nominal) and provides a 5.0V or 3.3V output at 5A. The board also has jumper connectors to enable or disable the converter operation, change (...)
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TIDA-00887 — バッテリ短絡保護付き、車載 2.4A デュアル・ポート USB ハブのリファレンス・デザイン
パッケージ | ピン数 | ダウンロード |
---|---|---|
HSOIC (DDA) | 8 | オプションの表示 |
WSON (DPR) | 10 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。