ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧モジュール (インダクタ内蔵)

LMZ14202

アクティブ

リード付き SMT-TO パッケージ封止、SIMPLE SWITCHER®、6V ~ 42V、2A パワー モジュール

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TPSM63602 アクティブ 4mm x 6mm x 1.8mm パッケージ封止、3.6V ~ 36V 入力、1V ~ 12V 出力、2A 降圧モジュール Smaller QFN packaging designed for low EMI.
TPSM63603 アクティブ 高密度、3V ~ 36V 入力、1V ~ 16V 出力、3A パワー・モジュール Smaller QFN packaging designed for low EMI.

製品詳細

Iout (max) (A) 2 Vin (min) (V) 6 Vin (max) (V) 42 Vout (min) (V) 0.8 Vout (max) (V) 6 Soft start Adjustable Features EMI Tested, Enable, Tracking Operating temperature range (°C) -40 to 125 Iq (typ) (mA) 1 Regulated outputs (#) 1 Switching frequency (max) (kHz) 1000 Switching frequency (min) (kHz) 200 Duty cycle (max) (%) 92.5 Topology Buck, Inverting Buck-Boost, Synchronous Buck Type Module Rating Catalog Control mode Constant on-time (COT)
Iout (max) (A) 2 Vin (min) (V) 6 Vin (max) (V) 42 Vout (min) (V) 0.8 Vout (max) (V) 6 Soft start Adjustable Features EMI Tested, Enable, Tracking Operating temperature range (°C) -40 to 125 Iq (typ) (mA) 1 Regulated outputs (#) 1 Switching frequency (max) (kHz) 1000 Switching frequency (min) (kHz) 200 Duty cycle (max) (%) 92.5 Topology Buck, Inverting Buck-Boost, Synchronous Buck Type Module Rating Catalog Control mode Constant on-time (COT)
TO-PMOD (NDW) 7 139.9032 mm² 10.16 x 13.77

The LMZ14202 SIMPLE SWITCHER® power module is an easy-to-use step-down DC-DC solution capable of driving up to 2A load with exceptional power conversion efficiency, line and load regulation, and output accuracy. The LMZ14202 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ14202 can accept an input voltage rail between 6V and 42V and deliver an adjustable and highly accurate output voltage as low as 0.8V. The LMZ14202 only requires three external resistors and four external capacitors to complete the power solution. The LMZ14202 is a reliable and robust design with the following protection features: thermal shutdown, input under-voltage lockout, output over-voltage protection, short-circuit protection, output current limit, and allows startup into a pre-biased output. A single resistor adjusts the switching frequency up to 1 MHz.



Electrical Specifications

  • 12W maximum total output power
  • Up to 2A output current
  • Input voltage range 6V to 42V
  • Output voltage range 0.8V to 6V
  • Efficiency up to 90%

  • Key Features

  • Integrated shielded inductor
  • Simple PCB layout
  • Flexible startup sequencing using external soft-start and precision enable
  • Protection against inrush currents and faults such as input UVLO and output short circuit
  • – 40°C to 125°C junction temperature range
  • Single exposed pad and standard pinout for easy mounting and manufacturing
  • Fast transient response for powering FPGAs and ASICs
  • Low output voltage ripple
  • Pin-to-pin compatible family:

  • LMZ14203/2/1 (42V max 3A, 2A, 1A)

  • LMZ12003/2/1 (20V max 3A, 2A, 1A)
  • Fully enabled for Webench® Power Designer

  • The LMZ14202 SIMPLE SWITCHER® power module is an easy-to-use step-down DC-DC solution capable of driving up to 2A load with exceptional power conversion efficiency, line and load regulation, and output accuracy. The LMZ14202 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

    The LMZ14202 can accept an input voltage rail between 6V and 42V and deliver an adjustable and highly accurate output voltage as low as 0.8V. The LMZ14202 only requires three external resistors and four external capacitors to complete the power solution. The LMZ14202 is a reliable and robust design with the following protection features: thermal shutdown, input under-voltage lockout, output over-voltage protection, short-circuit protection, output current limit, and allows startup into a pre-biased output. A single resistor adjusts the switching frequency up to 1 MHz.



    Electrical Specifications

  • 12W maximum total output power
  • Up to 2A output current
  • Input voltage range 6V to 42V
  • Output voltage range 0.8V to 6V
  • Efficiency up to 90%

  • Key Features

  • Integrated shielded inductor
  • Simple PCB layout
  • Flexible startup sequencing using external soft-start and precision enable
  • Protection against inrush currents and faults such as input UVLO and output short circuit
  • – 40°C to 125°C junction temperature range
  • Single exposed pad and standard pinout for easy mounting and manufacturing
  • Fast transient response for powering FPGAs and ASICs
  • Low output voltage ripple
  • Pin-to-pin compatible family:

  • LMZ14203/2/1 (42V max 3A, 2A, 1A)

  • LMZ12003/2/1 (20V max 3A, 2A, 1A)
  • Fully enabled for Webench® Power Designer

  • ダウンロード 字幕付きのビデオを表示 ビデオ

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    22 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート LMZ14202 2A SIMPLE SWITCHER® Power Module with 42V Maximum Input Voltag(jp) データシート (Rev. D 翻訳版) 最新英語版 (Rev.J) PDF | HTML 2011年 6月 15日
    セレクション・ガイド Innovative DC/DC Power Modules Selection Guide (Rev. D) 2021年 10月 14日
    アプリケーション・ノート Practical Thermal Design With DC/DC Power Modules (Rev. A) 2019年 11月 20日
    セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
    ホワイト・ペーパー 低EMI設計を電源モジュールで簡素化 英語版 2018年 1月 25日
    ホワイト・ペーパー Benefits and trade-offs of various power-module package options 2017年 8月 2日
    ホワイト・ペーパー Comparing the Merits of Integrated Power Modules versus Discrete Regulators (Rev. B) 2016年 9月 15日
    アプリケーション・ノート Design Summary LMZ1xxx and LMZ2xxx Power Module Family (Rev. B) 2016年 1月 20日
    その他の技術資料 SIMPLE SWITCHER パワー・モジュール 2013年 9月 9日
    アプリケーション・ノート AN-2027 Inverting Application for the LMZ14203 SIMPLE SWITCHER Power Module (Rev. A) 2013年 5月 6日
    EVM ユーザー ガイド (英語) AN-2024 LMZ1420x / LMZ1200x Evaluation Board (Rev. E) 2013年 4月 24日
    アプリケーション・ノート AN-2026 Effect of PCB Design on Thermal Performance of SIMPLE SWITCHER Modules (Rev. A) 2013年 4月 23日
    アプリケーション・ノート AN-2052 Texas Instruments SIMPLE SWITCHER Power Modules and EMI (Rev. C) 2013年 4月 23日
    アプリケーション・ノート AN-2078 PCB Layout for Texas Instruments SIMPLE SWITCHER Power Modules (Rev. A) 2013年 4月 23日
    その他の技術資料 SIMPLE SWITCHER® Power Modules for Broadcast Video 2012年 4月 2日
    その他の技術資料 SIMPLE SWITCHER® Power Modules for Communications Infrastructure 2012年 4月 2日
    その他の技術資料 SIMPLE SWITCHER® Power Modules for Factory Automation 2012年 4月 2日
    その他の技術資料 SIMPLE SWITCHER® Power Modules for Medical 2012年 4月 2日
    その他の技術資料 SIMPLE SWITCHER® Power Modules for Military 2012年 4月 2日
    その他の技術資料 SIMPLE SWITCHER® Power Modules for Test and Measurement 2012年 4月 2日
    アプリケーション・ノート ディスクリート型レギュレータと集積型パワー・モジュールのメリットの比較 2010年 8月 26日
    その他の技術資料 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005年 7月 12日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    評価ボード

    LMZ14202EVAL — Simple Switcher 電源モジュール評価ボード、42Vin、2A

    The SIMPLE SWITCHER power module evaluation board is optimized for peak performance and increased flexibility. By incorporating additional ceramic and an aluminum filter capacitor, the power module EVAL board demonstrates the low output ripple, fast transient response, and low conducted and (...)

    ユーザー ガイド: PDF
    シミュレーション・モデル

    LMZ14202 Unencrypted PSpice Transient Model

    SNVM765.ZIP (3 KB) - PSpice Model
    シミュレーション・モデル

    LMZ14202 Unencrypted PSpice Transient Model Package (Rev. A)

    SNVM140A.ZIP (196 KB) - PSpice Model
    計算ツール

    LMZ1X-LMZXEXTDESIGN-CALC — LMZ1x / 外部熱抵抗エスティメータ

    シミュレーション・ツール

    PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

    PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

    設計とシミュレーション向けの環境である PSpice for TI (...)
    リファレンス・デザイン

    TIDA-01056 — 電源効率の最適化と EMI の最小化を実現する 20 ビット、1MSPS DAQ(データ・アクイジション)のリファレンス・デザイン

    This reference design for high performance data acquisition (DAQ) systems optimizes power stage in order to reduce power consumption and minimize the effect of EMI from switching regulator by using LMS3635-Q1 buck converter.  This reference designs yields 7.2% efficiency improvement at most (...)
    設計ガイド: PDF
    回路図: PDF
    リファレンス・デザイン

    TIDA-01054 — 高性能 DAQ システムの EMI 効果排除向けマルチレール電源のリファレンス・デザイン

    TIDA-01054 リファレンス・デザインは LM53635 降圧コンバータを使用し、16 ビット超のデータ・アクイジション(DAQ)システムに EMI がもたらす性能低下の影響を排除します。降圧コンバータにより、基板面積を節減するとともに EMI によるノイズ劣化を招かずに、電源ソリューションをシグナルパスに近接配置できます。このリファレンス・デザインにより、20 ビットの1MSPS 逐次比較型(SAR)ADC を使用する場合に、100.13dB のシステム SNR 性能を実現できます。これは、外部電源を使用する場合の 100.14dB という SNR 性能に匹敵する値です。
    設計ガイド: PDF
    回路図: PDF
    リファレンス・デザイン

    TIDA-010055 — TIDA-010055

    このリファレンス・デザインは、アナログ入出力に対応する保護リレーと各種通信モジュール向けに、5V、12V、24V いずれかの DC 入力を受け入れ、非絶縁型電力を供給する電源アーキテクチャを提示します。このデザインは複数の電力出力を生成するために 1 個の統合型 FET を組み合わせた複数の DC/DC コンバータを使用し、サイズと開発期間を重視するアプリケーション向けに 1 個の統合型インダクタを組み合わせた 1 個のパワー・モジュールを使用しています。また、低 EMI を必要とするアプリケーション向けに HotRod™ (...)
    設計ガイド: PDF
    回路図: PDF
    リファレンス・デザイン

    TIDA-01055 — 高性能 DAQ システム向け ADC リファレンス電圧バッファ最適化のリファレンス・デザイン

    TIDA-01055 は高性能 DAQ システムのリファレンス・デザインで、TI の高速オペアンプ OPA837 の使用により ADC リファレンス・バッファを最適化し、SNR 特性の改善と消費電力の低減を実現します。複合バッファ構成で使用され、従来のオペアンプに比べ消費電力を 22% 改善します。バッファ内蔵リファレンス電圧源は多くの場合、チャネル数の多いシステムでの最適性能の実現に必要な駆動能力が不足しています。  このリファレンス・デザインは複数の ADC を駆動可能なほか、18 ビット 2MSPS 逐次比較型(SAR)ADC を使用して、15.77 ビットのシステム (...)
    設計ガイド: PDF
    回路図: PDF
    リファレンス・デザイン

    TIDA-01057 — 10Vpp の真の差動入力に対応し、信号ダイナミック・レンジを最大化する最大 20 ビットの ADC のリファレンス・デザイン

    This reference design is designed for high performance data acquisition(DAQ) systems to improve the dynamic range of 20 bit differential input ADCs. Many DAQ systems require the measurement capability at a wide FSR (Full Scale Range) in order to obtain sufficient signal dynamic range. Many earlier (...)
    設計ガイド: PDF
    回路図: PDF
    リファレンス・デザイン

    TIDA-01050 — 18 ビット SAR(逐次比較型)データ・コンバータ向けに最適化されたアナログ・フロント・エンド DAQ(データ・アクイジション)システムのリファレンス・デザイン

    TIDA-01050 リファレンス・デザインは自動試験機器に付随する、統合、消費電力、性能、クロッキングの課題を改善します。いかなる ATE(自動試験機器)にも使用できますが、多数の入力チャネルを必要とするシステムに特に最適です。
    設計ガイド: PDF
    回路図: PDF
    リファレンス・デザイン

    TIDA-01052 — 負電源を使用してフルスケール THD を改善する ADC ドライバのリファレンス・デザイン

    TIDA-01052 リファレンス・デザインは、アナログ・フロント・エンド・ドライバ・アンプでグランドの代わりに負の電圧レールを使用する際に見られるシステム性能の向上を実現します。このコンセプトはすべてのアナログ・フロント・エンドに該当しますが、ここでは特に自動試験機器を対象としています。
    設計ガイド: PDF
    回路図: PDF
    パッケージ ピン数 ダウンロード
    TO-PMOD (NDW) 7 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ