ホーム パワー・マネージメント LED ドライバ RGB LED ドライバ

LP55231

アクティブ

プログラム・メモリとチャージ・ポンプ内蔵、WQFN 封止、9 チャネル、RGB / 白色 LED ドライバ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと類似の機能
NEW LP5813 アクティブ I2C と自動アニメーション (パターン表示) 制御機能搭載、同期整流昇圧、4 x 3 マトリクス、RGB LED ドライバ Newer device with sync boost, lower IQ and smaller size

製品詳細

Number of channels 9 LED current per channel (mA) 25.5 LED configuration Parallel Program memory Yes Topology Charge pump Programmable ramp control Yes Vin (min) (V) 2.7 Vin (max) (V) 5.5 Iout (max) (A) 0.0255 Features Analog/PWM mixed dimming, Constant current, Current control, I2C control, Power-save mode, Programmable lighting engines Iq (typ) (mA) 0.8 Shutdown current (ISD) (typ) (µA) 0.2 Operating temperature range (°C) -30 to 85 Rating Catalog
Number of channels 9 LED current per channel (mA) 25.5 LED configuration Parallel Program memory Yes Topology Charge pump Programmable ramp control Yes Vin (min) (V) 2.7 Vin (max) (V) 5.5 Iout (max) (A) 0.0255 Features Analog/PWM mixed dimming, Constant current, Current control, I2C control, Power-save mode, Programmable lighting engines Iq (typ) (mA) 0.8 Shutdown current (ISD) (typ) (µA) 0.2 Operating temperature range (°C) -30 to 85 Rating Catalog
WQFN (RTW) 24 16 mm² 4 x 4
  • Three Independent Program Execution Engines, 9 Programmable Outputs With 25.5-mA Full-Scale Current, 8-Bit Current Setting Resolution and
    12-Bit PWM Control Resolution
  • Adaptive High-Efficiency 1×/1.5× Fractional Charge Pump - Efficiency up to 94%
  • LED Drive Efficiency Up to 93%
  • Charge Pump With Soft Start
  • Overcurrent and Short-Circuit Protection
  • Built-in LED Test
  • 200-nA Typical Standby Current
  • Automatic Power Save Mode; IVDD = 10 µA (Typical)
  • Two-Wire I2C-Compatible Control Interface
  • Flexible Instruction Set
  • Large SRAM Program Memory
  • Small Application Circuit
  • Source (High-Side) Drivers
  • Architecture Supports Color Control
  • Three Independent Program Execution Engines, 9 Programmable Outputs With 25.5-mA Full-Scale Current, 8-Bit Current Setting Resolution and
    12-Bit PWM Control Resolution
  • Adaptive High-Efficiency 1×/1.5× Fractional Charge Pump - Efficiency up to 94%
  • LED Drive Efficiency Up to 93%
  • Charge Pump With Soft Start
  • Overcurrent and Short-Circuit Protection
  • Built-in LED Test
  • 200-nA Typical Standby Current
  • Automatic Power Save Mode; IVDD = 10 µA (Typical)
  • Two-Wire I2C-Compatible Control Interface
  • Flexible Instruction Set
  • Large SRAM Program Memory
  • Small Application Circuit
  • Source (High-Side) Drivers
  • Architecture Supports Color Control

The LP55231 is a 9-channel LED driver designed to produce lighting effects for mobile devices. A high-efficiency charge pump enables LED driving over full Li-Ion battery voltage range. The device is equipped with an internal program memory, which allows operation without processor control.

The LP55231 has an I2C-compatible control interface with four pin-selectable addresses. The INT pin can be used to notify processor when a lighting sequence has ended (interrupt function). Also, the device has a trigger input interface, which allows synchronization, for example, between multiple LP55231 devices. Excellent efficiency is maintained over a wide operating range by autonomously selecting the best charge pump gain based on LED forward voltage requirements. The device is able to automatically enter power-save mode when LED outputs are not active, thus lowering idle current consumption down to 10 µA (typical). Only four small and low-cost ceramic capacitors are required.

For all available packages, see the orderable addendum at the end of the data sheet.

The LP55231 is a 9-channel LED driver designed to produce lighting effects for mobile devices. A high-efficiency charge pump enables LED driving over full Li-Ion battery voltage range. The device is equipped with an internal program memory, which allows operation without processor control.

The LP55231 has an I2C-compatible control interface with four pin-selectable addresses. The INT pin can be used to notify processor when a lighting sequence has ended (interrupt function). Also, the device has a trigger input interface, which allows synchronization, for example, between multiple LP55231 devices. Excellent efficiency is maintained over a wide operating range by autonomously selecting the best charge pump gain based on LED forward voltage requirements. The device is able to automatically enter power-save mode when LED outputs are not active, thus lowering idle current consumption down to 10 µA (typical). Only four small and low-cost ceramic capacitors are required.

For all available packages, see the orderable addendum at the end of the data sheet.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスにアップグレード機能を搭載した、ドロップ・イン代替製品
LP5569 アクティブ エンジン制御およびチャージ・ポンプ搭載の 9 チャネル I2C、RGB LED ドライバ LP5569 is for common anode LEDs, while LP55231 is for common cathode LEDs

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
5 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LP55231 Nine-Channel RGB, White-LED Driver With Internal Program Memory and Integrated Charge Pump - WQFN データシート (Rev. D) PDF | HTML 2016年 12月 29日
ホワイト・ペーパー Common LED Functions and LED Driver Design Considerations.. 英語版 2020年 9月 21日
アプリケーション・ノート How to Select a RGB LED Driver 2019年 8月 8日
技術記事 How energy harvesting can extend the life of your fault indicator on the grid PDF | HTML 2017年 10月 18日
EVM ユーザー ガイド (英語) LP55231EVM User's Guide (Rev. B) 2015年 12月 11日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LP55231SQEVM — プログラマブル 9 出力 LED ドライバ評価モジュール・ボード

Programmable 9-Output LED Driver Evaluation Module Board

The LP55231EVM demonstrates the flexibility and programability of LP55231 for dimming and sequencing control of LEDs.
ユーザー ガイド: PDF
ドライバまたはライブラリ

LP5523SW-LINUX — Linux ドライバ、LP5523 用

The Linux driver supports the LP5523 series of LED Drivers. The Linux driver supports communication through the I2C bus and interfaces with the LED sub-system.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • lp5523
  • lp55231

 

Linux Source Files

(...)

評価基板 (EVM) 向けの GUI

SNVC132 LP55231 Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
RGB LED ドライバ
LP55231 プログラム・メモリとチャージ・ポンプ内蔵、WQFN 封止、9 チャネル、RGB / 白色 LED ドライバ
ハードウェア開発
評価ボード
LP55231SQEVM プログラマブル 9 出力 LED ドライバ評価モジュール・ボード
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDA-00757 — 4x 単 3 バッテリの 5 年超の寿命を実現するスマートロックのリファレンス・デザイン

ビルや住宅にスマート・ロック(電子ロック)をレトロフィット(後付け)するケース増加するにつれて、今日の市場では、バッテリで動作するワイヤレス・スマート・ロックがますます普及しています。スマート・ロック・アプリケーションでは、大電流モーターと無線の動作によってバッテリが急速に消費し、バッテリ寿命に問題が生じています。  複数のバッテリの交換には時間とコストを要します。そのため、平均消費電流の低減は、設計の際の重要な考慮事項になります。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-01067 — 圧力、湿度、温度センシング付きスマート・ダンパ制御のリファレンス・デザイン

このリファレンス・デザインは、ネットワーク接続型 HVAC (エアコン) システムで、複数の部屋の快適度制御を実現する設計を採用しています。温度、湿度、圧力のセンシングにより、各ゾーンを別々に監視し、気流を調整できます。このリファレンス・デザインは、定風量 (CAV) システムを可変風量 (VAV) (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00998 — オーバーヘッド・フォルト・インジケータ向けエネルギ・ハーベスト / フォルト・インジケータ・サブシステムのリファレンス・デザイン

このリファレンス・デザインは、変流器 (CT) または太陽電池からのエネルギー・ハーベストによる 2 次バッテリまたはスーパーキャパシタを使用した、1 次電池の動作時間延長のための複数のアーキテクチャを示しています。  LED の直列接続ストリングまたは並列ストリングを駆動する効率的な LED ドライバを使用した最適なパワー・マネージメントにより、輝度を制御し、均一な 360 度の視認性を実現します。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
WQFN (RTW) 24 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ