ホーム パワー・マネージメント リニア・レギュレータと低ドロップアウト (LDO) レギュレータ

LP5912-Q1

アクティブ

車載対応、逆電流保護機能搭載、500mA、低ノイズ、低静止電流 (IQ)、低ドロップアウト電圧レギュレータ

製品詳細

Output options Fixed Output Iout (max) (A) 0.5 Vin (max) (V) 6.5 Vin (min) (V) 1.6 Vout (max) (V) 3.3 Vout (min) (V) 0.9 Fixed output options (V) 0.9, 1.1, 1.2, 1.5, 1.8, 2.8, 3, 3.3 Noise (µVrms) 12 Iq (typ) (mA) 0.03 Thermal resistance θJA (°C/W) 71 TI functional safety category Functional Safety-Capable Rating Automotive Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Output discharge, Power good, Reverse Current Protection, Soft start Accuracy (%) 3 PSRR at 100 KHz (dB) 40 Dropout voltage (Vdo) (typ) (mV) 150 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 0.5 Vin (max) (V) 6.5 Vin (min) (V) 1.6 Vout (max) (V) 3.3 Vout (min) (V) 0.9 Fixed output options (V) 0.9, 1.1, 1.2, 1.5, 1.8, 2.8, 3, 3.3 Noise (µVrms) 12 Iq (typ) (mA) 0.03 Thermal resistance θJA (°C/W) 71 TI functional safety category Functional Safety-Capable Rating Automotive Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Output discharge, Power good, Reverse Current Protection, Soft start Accuracy (%) 3 PSRR at 100 KHz (dB) 40 Dropout voltage (Vdo) (typ) (mV) 150 Operating temperature range (°C) -40 to 125
WSON (DRV) 6 4 mm² 2 x 2
  • Qualified for Automotive Applications
  • AEC Q100-Qualified With the Following Results
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM Classification Level 2
    • Device CDM Classification Level C6
  • Input Voltage Range: 1.6 V to 6.5 V
  • Output Voltage Range: 0.8 V to 5.5 V
  • Output Current up to 500 mA
  • Low Output-Voltage Noise: 12 µVRMS Typical
  • PSRR at 1 kHz: 75 dB Typical
  • Output Voltage Tolerance (VOUT ≥ 3.3 V): ±2%
  • Low IQ (Enabled, No Load): 30 µA Typical
  • Low Dropout (VOUT ≥ 3.3 V): 95 mV Typical at 500-mA Load
  • Stable With 1-µF Ceramic Input and Output Capacitors
  • Thermal-Overload and Short-Circuit Protection
  • Reverse Current Protection
  • No Noise Bypass Capacitor Required
  • Output Automatic Discharge for Fast Turnoff
  • Power-Good Output With 140-µs Typical Delay
  • Internal Soft-Start to Limit the In-rush Current
  • –40°C to +125°C Operating Junction Temperature Range
  • Qualified for Automotive Applications
  • AEC Q100-Qualified With the Following Results
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM Classification Level 2
    • Device CDM Classification Level C6
  • Input Voltage Range: 1.6 V to 6.5 V
  • Output Voltage Range: 0.8 V to 5.5 V
  • Output Current up to 500 mA
  • Low Output-Voltage Noise: 12 µVRMS Typical
  • PSRR at 1 kHz: 75 dB Typical
  • Output Voltage Tolerance (VOUT ≥ 3.3 V): ±2%
  • Low IQ (Enabled, No Load): 30 µA Typical
  • Low Dropout (VOUT ≥ 3.3 V): 95 mV Typical at 500-mA Load
  • Stable With 1-µF Ceramic Input and Output Capacitors
  • Thermal-Overload and Short-Circuit Protection
  • Reverse Current Protection
  • No Noise Bypass Capacitor Required
  • Output Automatic Discharge for Fast Turnoff
  • Power-Good Output With 140-µs Typical Delay
  • Internal Soft-Start to Limit the In-rush Current
  • –40°C to +125°C Operating Junction Temperature Range

The LP5912-Q1 is low-noise LDO that can supply up to 500 mA of output current. Designed to meet the requirements of RF and analog circuits, the LP5912-Q1 device provides low noise, high PSRR, low quiescent current, and low line and load transient response. The LP5912-Q1 offers class-leading noise performance without a noise bypass capacitor and with the ability for remote output capacitance placement.

The device is designed to work with a 1-µF input and a 1-µF output ceramic capacitor (no separate noise bypass capacitor required).

This device is available with fixed output voltages from 0.8 V to 5.5 V in 25-mV steps. Contact Texas Instruments Sales for specific voltage option needs.

For all available packages, see the Package Option Addendum (POA) at the end of this data sheet.

The LP5912-Q1 is low-noise LDO that can supply up to 500 mA of output current. Designed to meet the requirements of RF and analog circuits, the LP5912-Q1 device provides low noise, high PSRR, low quiescent current, and low line and load transient response. The LP5912-Q1 offers class-leading noise performance without a noise bypass capacitor and with the ability for remote output capacitance placement.

The device is designed to work with a 1-µF input and a 1-µF output ceramic capacitor (no separate noise bypass capacitor required).

This device is available with fixed output voltages from 0.8 V to 5.5 V in 25-mV steps. Contact Texas Instruments Sales for specific voltage option needs.

For all available packages, see the Package Option Addendum (POA) at the end of this data sheet.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TPS745-Q1 アクティブ 車載対応、パワー グッド搭載、500mA、低静止電流 (IQ)、高 PSRR、低ドロップアウト (LDO) 電圧レギュレータ Same functionality with adjustable options available
NEW TPS7A21-Q1 アクティブ 車載、500mA、低ノイズ、超低静止電流 (IQ)、高 PSRR、低ドロップアウト (LDO) 電圧レギュレータ Improved performance with lower noise, higher PSRR and lower Iq

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
4 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LP5912-Q1 Automotive 500-mA Low-Noise, Low-IQ LDO データシート (Rev. C) PDF | HTML 2016年 9月 2日
機能安全情報 LP5912-Q1 Functional Safety FIT Rate and Failure Mode Distribution 2019年 12月 16日
技術記事 Power over coax: A design guide for automotive applications PDF | HTML 2016年 8月 26日
EVM ユーザー ガイド (英語) LP5912DRV EVM User's Guide 2015年 12月 15日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

DS90UB971-Q1EVM — DS90UB971-Q1 の評価基板

DS90UB971-Q1 評価基板 (EVM) は、FPD-Link IV シリアライザである DS90UB971-Q1 を評価する目的で機能するボードを提示するデザインです。DS90UB971-Q1 シリアライザは、FPD-Link IV シリアライザの第 1 世代であり、8MP (メガピクセル) またはそれ以上のイメージャ、衛星のレーダー、LIDAR、タイム オブ フライト (ToF) センサを含め、各種超高速センサをサポートする設計を採用しています。このチップは、1 個の 8.4Gbps フォワード チャネルと、レイテンシが非常に短い 1 個の 52.5Mbps (...)
評価ボード

LP5912DRV33EVM — DRV パッケージ封止、3.3V、500mA、低ノイズ、低 IQ LDO 電圧レギュレータ向け LP5912 評価基板

LP5912 評価基板 (EVM) を使用すると、LP5912-3.3DRVR 低ノイズ、500mA リニア・レギュレータを評価できます。このレギュレータは、ユーザーがアクセス可能なテスト・ポイントを備えており、イネーブル (EN) とパワー・グッド (PG) に対応しています。この評価基板は、固定電圧レギュレーション (3.3V) 用の正電圧低ドロップアウト・レギュレータ IC を 1 個搭載したスタンドアロン評価基板です。この評価基板により、6 ピン WSON/DRV パッケージに封止した 3.3V、500mA の超低ノイズ、低ドロップアウト・リニア・レギュレータの動作を実証できます。

ユーザー ガイド: PDF
シミュレーション・モデル

LP5912 0P9 PSpice Transient Model

SNVMAJ1.ZIP (62 KB) - PSpice Model
シミュレーション・モデル

LP5912 0P9 Unencrypted PSpice Transient Model

SNVMAJ0.ZIP (3 KB) - PSpice Model
シミュレーション・モデル

LP5912 1P1 PSpice Transient Model

SNVMB44.ZIP (63 KB) - PSpice Model
シミュレーション・モデル

LP5912 1P1 Unencrypted PSpice Transient Model

SNVMB43.ZIP (3 KB) - PSpice Model
シミュレーション・モデル

LP5912 1P2 PSpice Transient Model

SNVMB47.ZIP (63 KB) - PSpice Model
シミュレーション・モデル

LP5912 1P2 Unencrypted PSpice Transient Model

SNVMB46.ZIP (3 KB) - PSpice Model
シミュレーション・モデル

LP5912 1P5 PSpice Transient Model

SNVMAI7.ZIP (62 KB) - PSpice Model
シミュレーション・モデル

LP5912 1P5 Unencrypted PSpice Transient Model

SNVMAI8.ZIP (3 KB) - PSpice Model
シミュレーション・モデル

LP5912 1P8 Unencrypted PSpice Transient Model

SNVMAJ4.ZIP (3 KB) - PSpice Model
シミュレーション・モデル

LP5912 1P8_PSpice Transient Model

SNVMAI3.ZIP (61 KB) - PSpice Model
シミュレーション・モデル

LP5912 2P8 PSpice Transient Model

SNVMAI9.ZIP (62 KB) - PSpice Model
シミュレーション・モデル

LP5912 2P8_Unencrypted PSpice Transient Model

SNVMAI2.ZIP (3 KB) - PSpice Model
シミュレーション・モデル

LP5912 3P0 PSpice Transient Model

SNVMB42.ZIP (63 KB) - PSpice Model
シミュレーション・モデル

LP5912 3P0 Unencrypted PSpice Transient Model

SNVMB45.ZIP (3 KB) - PSpice Model
シミュレーション・モデル

LP5912 3P3 PSpice Transient Model

SNVMAJ3.ZIP (59 KB) - PSpice Model
シミュレーション・モデル

LP5912 3P3 Unencrypted PSpice Transient Model

SNVMAJ2.ZIP (3 KB) - PSpice Model
リファレンス・デザイン

PMP23242 — 車載、マイクロプロセッサ ユニット (MPU) 向け、ディスクリート電源のリファレンス デザイン

このデザインは、低コストのディスクリート電圧レギュレータを複数使用したパワー ツリーを提示し、AM62x-Q1 プロセッサ ファミリのさまざまな電圧レール固有のパワーアップ / パワーダウン シーケンシング要件の詳細を示します。
試験報告書: PDF
リファレンス・デザイン

TIDA-01168 — 12V/48V 車載システム向け双方向 DC/DC コンバータのリファレンス・デザイン

TIDA-01168 リファレンス・デザインは、12V/48V 車載システム向け 4 相双方向 DC/DC コンバータ開発プラットフォームです。システムは出力段制御に 2 つの LM5170-Q1 電流コントローラと、1 つの TMS320F28027F マイコン(MCU)を使用しています。C2000™ マイコンが電流制御に電圧フィードバックを使用するのに対して、LM5170-Q1 サブシステムは平均電流フィードバックを使用します。こうした制御方式では、マルチフェーズ・コンバータで使われる位相電流バランシングが不要になります。LM5170-Q1 (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

PMP22030 — Efficient, low-heat, CISPR 25 class 5-compliant power reference design for infotainment display

このリファレンス・デザインが注目している車載インフォテインメント・ディスプレイ・ユニット向けパワー・ツリーは、それぞれ 5.0V と 3.3V を供給する 2 個のバッテリ直結型コンバータや、1.8V と 1.1V の中間システム・レールを含め、さまざまな電源レールに対応しています。テスト結果は、高効率、少ない発熱量、CISPR 25 class 5 の伝導型電磁波規格への準拠を示しています。 
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00733 — 2.1MHz スイッチング電源付き車載 8 チャネル Class-D アンプのリファレンス・デザイン

TIDA-00733 は 8 チャネルの Class-D アンプ向けのリファレンス・デザインであり、2Ω の負荷を駆動できるほか、バッテリ直結に対応した降圧電源を搭載しており、5V と 3.3V の出力を供給します。このアンプのデザインには、各オーディオ・チャネル用のオーディオ入力があります。高性能のオーディオ A/D コンバータ(ADC)は、オーディオ入力からデジタル・データ・ストリームを生成するほか、システム向けのデジタル・タイミングも生成します。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
WSON (DRV) 6 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ