SLES248A May   2009  – March 2015 PCM1795

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Typical Characteristics
      1. 6.7.1 Digital Filter
      2. 6.7.2 Digital Filter: De-Emphasis Filter
      3. 6.7.3 Analog Dynamic Performance: Supply Voltage Characteristics
      4. 6.7.4 Analog Dynamic Performance: Temperature Characteristics
      5. 6.7.5 Analog FIR Filter performance in DSD Mode
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Audio Data Interface
        1. 7.3.1.1 Audio Serial Interface
        2. 7.3.1.2 PCM Audio Data Formats and Timing
        3. 7.3.1.3 External Digital Filter Interface and Timing
        4. 7.3.1.4 Direct Stream Digital (DSD) Format Interface and Timing
        5. 7.3.1.5 TDMCA Interface
        6. 7.3.1.6 Analog Output
    4. 7.4 Device Functional Modes
    5. 7.5 Programming
      1. 7.5.1 System Clock and Reset Functions
        1. 7.5.1.1 System Clock Input
        2. 7.5.1.2 Power-On and External Reset Functions
      2. 7.5.2 Function Descriptions
        1. 7.5.2.1 Zero Detect
      3. 7.5.3 Serial Control Interface
        1. 7.5.3.1 SPI Interface
        2. 7.5.3.2 Register Read/Write Operation
      4. 7.5.4 I2C Interface
        1. 7.5.4.1 Slave Address
        2. 7.5.4.2 Packet Protocol
        3. 7.5.4.3 Write Register
        4. 7.5.4.4 Read Register
        5. 7.5.4.5 Noise Suppression
    6. 7.6 Register Maps
      1. 7.6.1 Mode Control Registers
        1. 7.6.1.1 User-Programmable Mode Controls
        2. 7.6.1.2 Register Map
        3. 7.6.1.3 Register Definitions
          1. 7.6.1.3.1  R/W: Read/Write Mode Select
          2. 7.6.1.3.2  ATx[7:0]: Digital Attenuation Level Setting
          3. 7.6.1.3.3  R/W: Read/Write Mode Select
          4. 7.6.1.3.4  ATLD: Attenuation Load Control
          5. 7.6.1.3.5  FMT[2:0]: Audio Interface Data Format
          6. 7.6.1.3.6  DMF[1:0]: Sampling Frequency Selection for the De-Emphasis Function
          7. 7.6.1.3.7  DME: Digital De-Emphasis Control
          8. 7.6.1.3.8  MUTE: Soft Mute Control
          9. 7.6.1.3.9  R/W: Read/Write Mode Select
          10. 7.6.1.3.10 REV: Output Phase Reversal
          11. 7.6.1.3.11 ATS[1:0]: Attenuation Rate Select
          12. 7.6.1.3.12 OPE: DAC Operation Control
          13. 7.6.1.3.13 DFMS: Stereo DF Bypass Mode Select
          14. 7.6.1.3.14 FLT: Digital Filter Roll-Off Control
          15. 7.6.1.3.15 INZD: Infinite Zero Detect Mute Control
          16. 7.6.1.3.16 R/W: Read/Write Mode Select
          17. 7.6.1.3.17 SRST: System Reset Control
          18. 7.6.1.3.18 DSD: DSD Interface Mode Control
          19. 7.6.1.3.19 DFTH: Digital Filter Bypass (or Through Mode) Control
          20. 7.6.1.3.20 MONO: Monaural Mode Selection
          21. 7.6.1.3.21 CHSL: Channel Selection for Monaural Mode
          22. 7.6.1.3.22 OS[1:0]: ΔΣ Oversampling Rate Selection
          23. 7.6.1.3.23 R/W: Read/Write Mode Select
          24. 7.6.1.3.24 DZ[1:0]: DSD Zero Output Enable
          25. 7.6.1.3.25 PCMZ: PCM Zero Output Enable
          26. 7.6.1.3.26 R: Read Mode Select
          27. 7.6.1.3.27 ZFGx: Zero-Detection Flag
          28. 7.6.1.3.28 Read Mode Select
          29. 7.6.1.3.29 ID[4:0]: Device ID
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Typical Connection Diagram in PCM Mode
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
          1. 8.2.1.2.1 I/V Section
          2. 8.2.1.2.2 Differential Section
        3. 8.2.1.3 Application Curves
      2. 8.2.2 Application for External Digital Filter Interface
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Detailed Design Procedure
          1. 8.2.2.2.1 Application for Interfacing With an External Digital Filter
          2. 8.2.2.2.2 Pin Assignment When Using the External Digital Filter Interface
          3. 8.2.2.2.3 Audio Format
          4. 8.2.2.2.4 System Clock (SCK) and Interface Timing
          5. 8.2.2.2.5 Functions Available in the External Digital Filter Mode
            1. 8.2.2.2.5.1 FMT[2:0]: Audio Data Format Selection
            2. 8.2.2.2.5.2 OS[1:0]: ΔΣ Modulator Oversampling Rate Selection
        3. 8.2.2.3 Application Curves
      3. 8.2.3 Application for DSD Format (DSD Mode) Interface
        1. 8.2.3.1 Design Requirements
        2. 8.2.3.2 Detailed Design Procedure
          1. 8.2.3.2.1 Features
          2. 8.2.3.2.2 Pin Assignment When Using DSD Format Interface
          3. 8.2.3.2.3 Requirements for System Clock
          4. 8.2.3.2.4 DSD Mode Configuration and Function Controls
            1. 8.2.3.2.4.1 Configuration for the DSD Interface Mode
            2. 8.2.3.2.4.2 DMF[1:0]: Analog-FIR Performance Selection
            3. 8.2.3.2.4.3 OS[1:0]: Analog-FIR Operation-Speed Selection
        3. 8.2.3.3 Application Curves
      4. 8.2.4 TDMCA Interface Format
        1. 8.2.4.1 Design Requirements
        2. 8.2.4.2 Detailed Design Procedure
          1. 8.2.4.2.1  TDMCA Mode Determination
          2. 8.2.4.2.2  TDMCA Terminals
          3. 8.2.4.2.3  Device ID Determination
          4. 8.2.4.2.4  TDMCA Frame
          5. 8.2.4.2.5  Command Field
            1. 8.2.4.2.5.1 Bit 31: Device ID Enable Flag
            2. 8.2.4.2.5.2 Bit 30: Extended Command Enable Flag
            3. 8.2.4.2.5.3 Bit 29: Daisy-Chain Selection Flag
            4. 8.2.4.2.5.4 Bits[28:24]: Device ID
            5. 8.2.4.2.5.5 Bit 23: Command Read/Write flag
            6. 8.2.4.2.5.6 Bits[22:16]: Register ID
            7. 8.2.4.2.5.7 Bits[15:8]: Command data
            8. 8.2.4.2.5.8 Bits[7:0]: Not used
          6. 8.2.4.2.6  Extended Command Field
          7. 8.2.4.2.7  Audio Fields
          8. 8.2.4.2.8  TDMCA Register Requirements
          9. 8.2.4.2.9  Register Write/Read Operation
          10. 8.2.4.2.10 TDMCA Mode Operation
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Third-Party Products Disclaimer
    2. 11.2 Trademarks
    3. 11.3 Electrostatic Discharge Caution
    4. 11.4 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed.

TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use.

TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Products

Applications

TI E2E Community : e2e.ti.com

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright© 2014, Texas Instruments Incorporated