RF430FRL154H
- ISO/IEC 15693, ISO/IEC 18000-3 (Mode 1) Compliant RF Interface
- Power Supply System With Either Battery or 13.56-MHz H-Field Supply
- 14-Bit Sigma-Delta Analog-to-Digital Converter (ADC)
- Internal Temperature Sensor
- Resistive Sensor Bias Interface
- CRC16 CCITT Generator
- MSP430 Mixed-Signal Microcontroller
- 2KB of FRAM
- 4KB of SRAM
- 8KB of ROM
- Supply Voltage Range: 1.45 V to 1.65 V
- Low Power Consumption
- Active Mode (AM): 140 µA/MHz (1.5 V)
- Standby Mode (LPM3): 16 µA
- 16-Bit RISC Architecture
- Up to 2-MHz CPU System Clock
- Compact Clock System
- 4-MHz High-Frequency Clock
- 256-kHz Internal Low-Frequency Clock Source
- External Clock Input
- 16-Bit Timer_A With Three Capture/Compare Registers
- LV Port Logic
- VOL Lower Than 0.15 V at 400 µA
- VOH Higher Than (VDDB – 0.15 V) at 400 µA
- Timer_A PWM Signal Available on All Ports
- eUSCI_B Module Supports 3-Wire and 4-Wire SPI and I2C
- 32-Bit Watchdog Timer (WDT_A)
- ROM Development Mode (Map ROM Addresses to SRAM to Enable Firmware Development)
- Full 4-Wire JTAG Debug Interface
- For Complete Module Descriptions, See the RF430FRL15xH Family Technical Reference Manual (SLAU506)
- For Application Operation and Programming, See the RF430FRL15xH Firmware User's Guide (SLAU603)
The RF430FRL15xH device is a 13.56-MHz transponder chip with a programmable 16-bit MSP430 low-power microcontroller. The device features embedded universal FRAM nonvolatile memory for storage of program code or user data such as calibration and measurement data. The RF430FRL15xH supports communication, parameter setting, and configuration through the ISO/IEC 15693, ISO/IEC 18000-3 compliant RFID interface and the SPI or I2C interface. Sensor measurements are supported by the internal temperature sensor and the onboard 14-bit sigma-delta analog-to-digital converter (ADC), and digital sensors can be connected through SPI or I2C.
The RF430FRL15xH device is optimized for operation in fully passive (battery-less) or single-cell battery-powered (semi-active) mode to achieve extended battery life in portable and wireless sensing applications. FRAM is a nonvolatile memory that combines the speed, flexibility, and endurance of SRAM with the stability and reliability of flash, all at lower total power consumption.
Limited design support from TI available
Existing projects using this product have limited design support from TI. If available, you will find relevant collateral, tools and software on this page. Existing designs using this product have limited design support from TI. Request limited design support in the TI E2E™ support forums.
お客様が関心を持ちそうな類似品
比較対象デバイスと類似の機能
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | RF430FRL15xH NFC ISO 15693 Sensor Transponder データシート (Rev. C) | PDF | HTML | 2014年 12月 8日 | ||
* | エラッタ | RF430FRL15xH Device Errata Sheet (Rev. A) | 2018年 7月 3日 | |||
* | ユーザー・ガイド | RF430FRL15xH Family Technical Reference Manual | 2014年 12月 5日 | |||
アプリケーション・ノート | Frequently asked questions for RF430FRL15xH devices (Rev. C) | PDF | HTML | 2019年 3月 13日 | |||
EVM ユーザー ガイド (英語) | RF430FRL152HEVM User's Guide (Rev. C) | 2018年 7月 3日 | ||||
ユーザー・ガイド | RF430FRL15xH Firmware User's Guide (Rev. B) | 2017年 6月 28日 | ||||
その他の技術資料 | 無線通信ソリューション | 2015年 11月 4日 | ||||
アプリケーション・ノート | RF430FRL15xH NFC ISO 15693 Sensor Transponder Practical Antenna Design (Rev. A) | 2015年 7月 16日 | ||||
アプリケーション・ノート | RF430FRL15xH NFC ISO 15693 Sensor Transponder Practical Antenna Design | 2015年 4月 30日 | ||||
技術記事 | Your smartphone can help you control vital data using NFC | PDF | HTML | 2015年 4月 19日 | |||
ホワイト・ペーパー | Bio-patch Solutions for health and fitness (Rev. A) | 2014年 12月 9日 | ||||
ホワイト・ペーパー | Designing and evaluating an NFC-enabled bio-patch | 2014年 12月 1日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
RF430FRL152HEVM — NFC ISO 15693 センサ・トランスポンダ評価基板
RF430FRL152HEVM 評価基板は、ISO 15693 との互換性がある RF430FRL15xH NFC センサ・トランスポンダの機能や性能の評価に必要なすべての機能を搭載した自己完結型開発プラットフォームです。評価ボードの電源として、バッテリや USB のほか、付近にある NFC 対応リーダーやスマートフォンが発する電波からのエナジー・ハーベストを活用することもできます。ROM 内の組込みアプリケーション・コードは RF (...)
CCSTUDIO — Code Composer Studio 統合開発環境(IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications. Code Composer Studio is available for download across Windows®, Linux® and macOS® (...)
サポート対象の製品とハードウェア
こちらの設計リソースは、このカテゴリに属する製品の大半をサポートしています。
サポート状況を確認するには、製品の詳細ページをご覧ください。
-
parametric-filter MSP430 マイコン -
parametric-filter C2000 リアルタイム・マイコン -
parametric-filter Arm ベースのマイコン -
parametric-filter デジタル信号プロセッサ (DSP) -
parametric-filter Arm ベースのプロセッサ -
parametric-filter シグナル・コンディショナ -
parametric-filter ミリ波レーダー・センサ -
parametric-filter Zigbee 製品 -
parametric-filter Wi-Fi 製品 -
parametric-filter Thread 製品 -
parametric-filter その他のワイヤレス技術 -
parametric-filter Sub-1GHz 製品 -
parametric-filter マルチプロトコル製品 -
parametric-filter Bluetooth 製品 -
parametric-filter デジタル電源絶縁型コントローラ
TIDM-RF430FRLSENSE — RF430FRL152H NFC 温度および光センサ・リファレンス・デザイン
パッケージ | ピン数 | ダウンロード |
---|---|---|
VQFN (RGE) | 24 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。