SN74AVC8T245 8 ビット、デュアル電源バス・トランシーバ、電圧変 換構成可、3 ステート出力 | TIJ.co.jp

SN74AVC8T245 (供給中) 8 ビット、デュアル電源バス・トランシーバ、電圧変 換構成可、3 ステート出力

 

推奨代替製品

  • SN74AXC8T245  -  1.2V 未満の IO とグリッチなしの電源投入に対応するピン互換製品

概要

This 8-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC8T245 is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. The device is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.

The SN74AVC8T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are effectively isolated.

The SN74AVC8T245 is designed so that the control pins (DIR and OE) are supplied by VCCA.

The SN74AVC8T245 solution is compatible with a single-supply system and can be replaced later with a ’245 function, with minimal printed circuit board redesign.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down.

The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

特長

  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 8000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)
  • Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage
  • VCC Isolation Feature – If Either VCC Input Is at GND, All I/O Ports Are in the High-Impedance State
  • Ioff Supports Partial Power-Down Mode Operation
  • Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.4-V to 3.6-V Power-Supply Range
  • I/Os Are 4.6-V Tolerant
  • Maximum Data Rates
    • 170 Mbps (VCCA  < 1.8 V or VCCB  < 1.8 V)
    • 320 Mbps (VCCA  ≥ 1.8 V and VCCB  ≥ 1.8 V)

All trademarks are the property of their respective owners.

機能一覧

他の製品と比較 方向制御電圧レベルシフタ メール Excelへダウンロード
Part number オーダー・オプション Technology Family Application Bits (#) High input voltage (Min) (Vih) High input voltage (Max) (Vih) Output voltage (Min) (V) Output voltage (Max) (V) IOH (Max) (mA) IOL (Max) (mA) Package Group Rating
SN74AVC8T245 ご注文 AVC       8     0.78     3.6     1.2     3.6     -12     12     TSSOP | 24
TVSOP | 24
VQFN | 24    
Catalog    
SN74AVC8T245-Q1 ご注文 AVC       8     0.78     3.6     1.2     3.6     -12     12     TSSOP | 24
VQFN | 24    
Automotive    
SN74AVCH8T245 ご注文 AVC       8     1.2     3.6     1.2     3.6     -12     12     TSSOP | 24
TVSOP | 24
VQFN | 24    
Catalog    
SN74AXC8T245 ご注文 AXC     RGMII     8     0.455     3.6     0.65     3.6     -12     12     TSSOP | 24
UQFN | 24
VQFN | 24    
Catalog    
SN74AXC8T245-Q1 ご注文 AXC     RGMII     8     0.455     3.6     0.65     3.6     -12     12     TSSOP | 24
VQFN | 24    
Automotive    
SN74AXCH8T245 ご注文 AXC     RGMII     8     0.455     3.6     0.65     3.6     -12     12     TSSOP | 24
VQFN | 24    
Catalog    
SN74LVC8T245 ご注文 LVC     RGMII     8     1.08     5.5