The SN74CBT16214C is a high-speed TTL-compatible FET multiplexer/demultiplexer with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT16214C provides protection for undershoot up to 2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.
The SN74CBT16214C is a 12-bit 1-of-3 multiplexer/demultiplexer. The select (S0, S1, S2) inputs control the data path of each multiplexer/demultiplexer. When the multiplexer/demultiplexer is enabled, the A port is connected to the B port, allowing bidirectional data flow between ports. When the multiplexer/demultiplexer is disabled, a high-impedance state exists between the A and B ports.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down.
To ensure the high-impedance state during power up or power down, each select input should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Widebus is a trademark of Texas Instruments.
|Part number||オーダー・オプション||Configuration||Number of channels (#)||Ron (Typ) (Ohms)||Bandwidth (MHz)||Power supply type||Vdd (Min) (V)||Vdd (Max) (V)||Rating||Operating temperature range (C)||Package Group||Input/output continuous current (Max) (mA)||Features||OFF-state leakage current (Max) (µA)||CON (Typ) (pF)|
||3:1||12||3||200||Single||4||5.5||Catalog||-40 to 85||
SSOP | 56
TSSOP | 56