THS12082 12 ビット、8MSPS ADC、デュアル・チャネル、DSP/マイクロプロセッサ・インターフェイス、16段FIFO、チャネル自動スキャン、低消費電力 | TIJ.co.jp

THS12082
この製品はすでに市場にリリースされており、ご購入できます。 一部の製品は、より新しい代替品を使用できる可能性があります。
12 ビット、8MSPS ADC、デュアル・チャネル、DSP/マイクロプロセッサ・インターフェイス、16段FIFO、チャネル自動スキャン、低消費電力

12 ビット、8MSPS ADC、デュアル・チャネル、DSP/マイクロプロセッサ・インターフェイス、16段FIFO、チャネル自動スキャン、低消費電力 - THS12082
データシート
 

概要

The THS12082 is a CMOS, low-power, 12-bit, 8 MSPS analog-to-digital converter (ADC). The speed, resolution, bandwidth, and single-supply operation are suited for applications in radar, imaging, high-speed acquisition, and communications. A multistage pipelined architecture with output error correction logic provides for no missing codes over the full operating temperature range. Internal control registers allow for programming the ADC into the desired mode. The THS12082 consists of two analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. An integrated 16 word deep FIFO allows the storage of data in order to take the load off of the processor connected to the ADC. Internal reference voltages for the ADC (1.5 V and 3.5 V) are provided.

An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application. Two different conversion modes can be selected. In the single conversion mode, a single and simultaneous conversion can be initiated by using the single conversion start signal (CONVST)\. The conversion clock in the single conversion mode is generated internally using a clock oscillator circuit. In the continuous conversion mode, an external clock signal is applied to the CONV_CLK input of the THS12082. The internal clock oscillator is switched off in the continuous conversion mode.

The THS12082C is characterized for operation from 0°C to 70°C, and the THS12082I is characterized for operation from –40°C to 85°C.

特長

  • Simultaneous Sampling of 2 Single-Ended Signals or 1 Differential Signal
  • Integrated 16 Word FIFO
  • Signal-to-Noise and Distortion Ratio: 66 dB at fI = 2 MHz
  • Differential Nonlinearity Error: ±1 LSB
  • Integral Nonlinearity Error: ±1.5 LSB
  • Auto-Scan Mode for 2 Inputs
  • 3-V or 5-V Digital Interface Compatible
  • Low Power: 216 mW Max
  • 5-V Analog Single Supply Operation
  • Internal Voltage References . . . 50 PPM/°C and ±5% Accuracy
  • Parallel µC/DSP Interface
  • applications
    • Radar Applications
    • Communications
    • Control Applications
    • High-Speed DSP Front-End
    • Automotive Applications

WEBENCH® Designer THS12082



機能一覧

他の製品と比較 高精度 ADCs (<=10MSPS) メール Excelへダウンロード
Part number オーダー・オプション Resolution (Bits) Sample rate (Max) (kSPS) Number of input channels Interface Operating temperature range (C) Package Group Approx. price (US$) Power consumption (Typ) (mW) Package size: mm2:W x L (PKG) Architecture Input type Multi-channel configuration Reference mode Features Input range (Max) (V) Input range (Min) (V) Analog voltage AVDD (Min) (V) Analog voltage AVDD (Max) (V) Digital supply (Min) (V) Digital supply (Max) (V) INL (Max) (+/-LSB) SNR (dB) THD (Typ) (dB) Rating
THS12082 ご注文 12     8000     2     Parallel     -40 to 85
0 to 70    
TSSOP | 32     12.86 | 1ku     186     32TSSOP: 89 mm2: 8.1 x 11 (TSSOP | 32)     Pipeline     Differential
Single-Ended    
Simultaneous Sampling     Ext
Int    
    4     1.4     4.75     5.25     3     5.25     1.5     69     -70     Catalog