THS4281

アクティブ

超低消費電力、高速、レール・ツー・レール入出力、電圧帰還オペアンプ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
NEW OPA863A アクティブ シングルチャネル、高精度、低消費電力、105MHz、12V、RRIO (レール ツー レール入出力) 電圧帰還型アンプ Lower Iq (0.75 mA), lower noise (5.9 nV/√Hz) and higher precision (95 uV/C)

製品詳細

Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16.5 GBW (typ) (MHz) 50 BW at Acl (MHz) 95 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 35 Vn at flatband (typ) (nV√Hz) 12.5 Vn at 1 kHz (typ) (nV√Hz) 12.5 Iq per channel (typ) (mA) 0.8 Vos (offset voltage at 25°C) (max) (mV) 2.5 Rail-to-rail In, Out Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 107 Input bias current (max) (pA) 800000 Offset drift (typ) (µV/°C) 7 Iout (typ) (mA) 30 2nd harmonic (dBc) 69 3rd harmonic (dBc) 76 Frequency of harmonic distortion measurement (MHz) 1
Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16.5 GBW (typ) (MHz) 50 BW at Acl (MHz) 95 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 35 Vn at flatband (typ) (nV√Hz) 12.5 Vn at 1 kHz (typ) (nV√Hz) 12.5 Iq per channel (typ) (mA) 0.8 Vos (offset voltage at 25°C) (max) (mV) 2.5 Rail-to-rail In, Out Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 107 Input bias current (max) (pA) 800000 Offset drift (typ) (µV/°C) 7 Iout (typ) (mA) 30 2nd harmonic (dBc) 69 3rd harmonic (dBc) 76 Frequency of harmonic distortion measurement (MHz) 1
SOIC (D) 8 29.4 mm² 4.9 x 6 SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8 VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Very Low Quiescent Current: 750 µA (at 5 V)
  • Rail-to-Rail Input and Output:
    • Common-Mode Input Voltage Extends
      400 mV Beyond the Rails
    • Output Swings Within 150 mV From the Rails
  • Wide –3-dB Bandwidth at 5 V:
    • 90 MHz at Gain = +1, 40 MHz at Gain = +2
  • High Slew Rate: 35 V/µs
  • Fast Settling Time (2-V Step):
    • 78 ns to 0.1%
    • 150 ns to 0.01%
  • Low Distortion at Gain = +2, VO = 2-VPP, 5 V:
    • –91 dBc at 100 kHz, –67 dBc at 1 MHz
  • Input Offset Voltage: 2.5 mV (Max at +25°C)
  • Output Current > 30 mA (10-Ω Load, 5 V)
  • Low Voltage Noise of 12.5 nV/√Hz
  • Supply Voltages: +2.7 V, 3 V, +5 V, ±5 V, +15 V
  • Packages: SOT23, MSOP, and SOIC
  • APPLICATIONS
    • Portable/Battery-Powered Applications
    • High Channel Count Systems
    • ADC Buffer
    • Active Filters
    • Current Sensing

All other trademarks are the property of their respective owners.

  • Very Low Quiescent Current: 750 µA (at 5 V)
  • Rail-to-Rail Input and Output:
    • Common-Mode Input Voltage Extends
      400 mV Beyond the Rails
    • Output Swings Within 150 mV From the Rails
  • Wide –3-dB Bandwidth at 5 V:
    • 90 MHz at Gain = +1, 40 MHz at Gain = +2
  • High Slew Rate: 35 V/µs
  • Fast Settling Time (2-V Step):
    • 78 ns to 0.1%
    • 150 ns to 0.01%
  • Low Distortion at Gain = +2, VO = 2-VPP, 5 V:
    • –91 dBc at 100 kHz, –67 dBc at 1 MHz
  • Input Offset Voltage: 2.5 mV (Max at +25°C)
  • Output Current > 30 mA (10-Ω Load, 5 V)
  • Low Voltage Noise of 12.5 nV/√Hz
  • Supply Voltages: +2.7 V, 3 V, +5 V, ±5 V, +15 V
  • Packages: SOT23, MSOP, and SOIC
  • APPLICATIONS
    • Portable/Battery-Powered Applications
    • High Channel Count Systems
    • ADC Buffer
    • Active Filters
    • Current Sensing

All other trademarks are the property of their respective owners.

Fabricated using the BiCom-II process, the THS4281 is a low-power, rail-to-rail input and output, voltage-feedback operational amplifier designed to operate over a wide power-supply range of 2.7-V to 15-V single supply, and ±1.35-V to ±7.5-V dual supply. Consuming only 750 µA with a unity gain bandwidth of 90 MHz and a high 35-V/µs slew rate, the THS4281 allows portable or other power-sensitive applications to realize high performance with minimal power. To ensure long battery life in portable applications, the quiescent current is trimmed to be less than 900 µA at +25°C, and 1 mA from –40°C to +85°C.

The THS4281 is a true single-supply amplifier with a specified common-mode input range of 400 mV beyond the rails. This allows for high-side current sensing applications without phase reversal concerns. Its output swings to within 40 mV from the rails with 10-kΩ loads, and 150 mV from the rails with 1-kΩ loads.

The THS4281 has a good 0.1% settling time of 78 ns, and 0.01% settling time of 150 ns. The low THD of –87 dBc at 100 kHz, coupled with a maximum offset voltage of less than 2.5 mV, makes the THS4281 a good match for high-resolution ADCs sampling less than 2 MSPS.

The THS4281 is offered in a space-saving SOT23-5 package, a small MSOP-8 package, and the industry standard SOIC-8 package.

Fabricated using the BiCom-II process, the THS4281 is a low-power, rail-to-rail input and output, voltage-feedback operational amplifier designed to operate over a wide power-supply range of 2.7-V to 15-V single supply, and ±1.35-V to ±7.5-V dual supply. Consuming only 750 µA with a unity gain bandwidth of 90 MHz and a high 35-V/µs slew rate, the THS4281 allows portable or other power-sensitive applications to realize high performance with minimal power. To ensure long battery life in portable applications, the quiescent current is trimmed to be less than 900 µA at +25°C, and 1 mA from –40°C to +85°C.

The THS4281 is a true single-supply amplifier with a specified common-mode input range of 400 mV beyond the rails. This allows for high-side current sensing applications without phase reversal concerns. Its output swings to within 40 mV from the rails with 10-kΩ loads, and 150 mV from the rails with 1-kΩ loads.

The THS4281 has a good 0.1% settling time of 78 ns, and 0.01% settling time of 150 ns. The low THD of –87 dBc at 100 kHz, coupled with a maximum offset voltage of less than 2.5 mV, makes the THS4281 a good match for high-resolution ADCs sampling less than 2 MSPS.

The THS4281 is offered in a space-saving SOT23-5 package, a small MSOP-8 package, and the industry standard SOIC-8 package.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
8 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート THS4281 Very Low-Power, High-Speed, Rail-to-Rail Input and Output Voltage-Feedback Operational Amplifier データシート (Rev. B) PDF | HTML 2015年 10月 30日
e-Book(PDF) The Signal - オペアンプ設計ブログ集 英語版 2018年 3月 23日
ホワイト・ペーパー Voltage-reference impact on total harmonic distortion 2016年 8月 1日
技術記事 When to use an amplifier with rail-to-rail inputs – and what to watch out for PDF | HTML 2016年 6月 30日
アプリケーション・ノート ADS8318 および ADS8319 用の、低消費電力の入力 / リファレンス・ドライバ回路 英語版 2011年 6月 9日
アプリケーション・ノート 高速オペアンプのノイズ解析 (Rev. A 翻訳版) 英語版 (Rev.A) 2007年 12月 5日
Analog Design Journal Designing for low distortion with high-speed op amps 2005年 3月 2日
アプリケーション・ノート Voltage Feedback vs. Current Feedback Op Amps 1998年 11月 30日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

THS4281EVM — THS4281 評価モジュール

The THS4281 evaluation module (EVM) User's Guide is included within the Datasheet.

The THS4281EVM provides a platform for evaluating the THS4281 dual, very low-power, high-speed, rail-to-rail input and output, voltage-feedback amplifier. The user needs only power, input signal, and test instruments (...)

シミュレーション・モデル

THS4281 PSpice Model (Rev. B)

SLOC047B.ZIP (54 KB) - PSpice Model
シミュレーション・モデル

THS4281 TINA-TI Reference Design

SLOM442.TSC (67 KB) - TINA-TI Reference Design
シミュレーション・モデル

THS4281 TINA-TI Spice Model

SLOM443.ZIP (14 KB) - TINA-TI Spice Model
計算ツール

ANALOG-ENGINEER-CALC — アナログ技術者向けカリキュレータ

アナログ・エンジニア向けカリキュレータは、アナログ回路設計エンジニアが日常的に繰り返し行っている計算の多くを迅速化します。この PC ベース・ツールはグラフィカル・インターフェイスにより、帰還抵抗を使用したオペアンプのゲイン設定から、A/D コンバータ(ADC)のドライブ・バッファ回路の安定化に最適な部品の選択に至るまで、一般的に行われている各種計算のリストを表示します。スタンドアロン・ツールとして使用できるほか、『アナログ回路設計式一覧ポケット・ガイド』で説明されているコンセプトと組み合わせることもできます。
計算ツール

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
シミュレーション・ツール

TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム

TINA-TI は、DC 解析、過渡解析、周波数ドメイン解析など、SPICE の標準的な機能すべてを搭載しています。TINA には多彩な後処理機能があり、結果を必要なフォーマットにすることができます。仮想計測機能を使用すると、入力波形を選択し、回路ノードの電圧や波形を仮想的に測定することができます。TINA の回路キャプチャ機能は非常に直観的であり、「クイックスタート」を実現できます。

TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)

TINA は DesignSoft (...)

ユーザー ガイド: PDF
英語版 (Rev.A): PDF
リファレンス・デザイン

TIPD149 — 電力最適化 16ビット 1MSPS データ取得ブロック、最小歪および雑音、リファレンス・デザイン

This TI Verified Design is the realization of a high precision, 16-bit 1MSPS data acquisition system suitable for applications such as digital audio that require front-ends with very low distortion and noise. The circuit uses a high performance Successive Approximation Register Analog to Digital (...)
ユーザー ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIPD115 — データ取得最適化、最小歪み、最小ノイズ、18 ビット、1Msps

この 検証済み設計は、1MSPS のスループットを発揮する 18 ビットの逐次比較型 ADC である ADS8881 を使用した高性能データ・アクイジション・システム(DAQ)を示しています。この設計は、10KHz のフルスケール正弦波入力信号用の最小のノイズ/歪ソリューションを実現するように最適化されています。これにより、50mW 未満の総消費電力で、有効ビット数(ENOB)の最大可能値を実現できるようになります。ADC の入力ドライバでは、超低歪、ノイズ、および高い小信号帯域幅に完全差動 THS4521 が使用されます。リファレンス・バッファ・ドライブは、THS4281 と OPA333 (...)
ユーザー ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIPD173 — 16 ビット 1MSPS データ取得リファレンス・デザイン、シングル・エンド・マルチプレックス・アプリケーション用

This TI Precision Verified Design details a systematic design methodology for a 16 bit, 1MSPS, single-ended data acquisition (DAQ) block optimized to achieve excellent settling time, power consumption, static performance and dynamic performance for multiplexed applications.  The design (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIPD113 — データ取得、10kHz AC、35mW、18 ビット、1Msps

この 検証済み設計は、1MSPS のスループットを発揮する 18 ビットの逐次比較型 ADC である ADS8881 を使用した高性能データ・アクイジション・システム(DAQ)を示しています。この設計は、10KHz のフルスケール正弦波入力信号用の最小の消費電力ソリューションを実現するように最適化されています。総消費電力が 35mW 未満であるこの設計は、16 ビットを超える有効分解能を実現できるよう最適化されています。ADC の入力ドライバでは、低消費電力、低ノイズ、およびリニア・レール・ツー・レール入出力動作に OPA320 (...)
ユーザー ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIPD112 — MUX とステップ入力用データ取得、18 ビット、1uS フル・スケール応答

この 検証済み設計は、1 MSPS のスループットを発揮する 18 ビットの逐次比較型 ADC である ADS8881 を使用した高性能データ・アクイジション・システム(DAQ)を示しています。この設計はフルスケール・ステップ入力信号用の 18 ビットのセトリング性能を実現するよう最適化されているため、優れたシステム直線性をもたらします。このような入力スティミュラスは、マルチプレクサ・アプリケーションにおいて異なる入力電圧のチャネル間遷移を行う場合により適切です。ADC の入力ドライバでは、高帯域(小信号および大信号)、出力電流ドライブ、およびリニア・レール・ツー・レール入出力動作に (...)
ユーザー ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIPD169 — 16 ビット、1MSPS マルチプレクス・データ取得、リファレンス・デザイン

This design is for a 16-bit 1MSPS single-ended, multiplexed data acquisition system (DAQ) for dc inputs. The system is composed of a 16-bit successive-approximation-register (SAR) analog-to-digital converter (ADC), SAR ADC driver, reference driver, and multiplexer. The design shows the process to (...)
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
SOIC (D) 8 オプションの表示
SOT-23 (DBV) 5 オプションの表示
VSSOP (DGK) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ