製品詳細

Number of channels 2 Output type Open-collector, Open-drain Propagation delay time (µs) 0.2 Vs (max) (V) 16 Vs (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 5 Iq per channel (typ) (mA) 0.075 Input bias current (±) (max) (nA) 0.03 Rail-to-rail In to V- Rating Catalog Operating temperature range (°C) -55 to 125 VICR (max) (V) 15 VICR (min) (V) 0
Number of channels 2 Output type Open-collector, Open-drain Propagation delay time (µs) 0.2 Vs (max) (V) 16 Vs (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 5 Iq per channel (typ) (mA) 0.075 Input bias current (±) (max) (nA) 0.03 Rail-to-rail In to V- Rating Catalog Operating temperature range (°C) -55 to 125 VICR (max) (V) 15 VICR (min) (V) 0
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6 SOP (PS) 8 48.36 mm² 6.2 x 7.8 TSSOP (PW) 8 19.2 mm² 3 x 6.4
  • Single or Dual-Supply Operation
  • Wide Range of Supply Voltages 2 V to 18 V
  • Low Supply Current Drain 150 µA Typ at 5 V
  • Fast Response Time . . . 200 ns Typ for TTL-Level Input Step
  • Built-in ESD Protection
  • High Input Impedance . . . 1012 Ω Typ
  • Extremely Low Input Bias Current 5 pA Typ
  • Ultrastable Low Input Offset Voltage
  • Input Offset Voltage Change at Worst-Case Input Conditions Typically 0.23 µV/Month, Including the First 30 Days
  • Common-Mode Input Voltage Range Includes Ground
  • Output Compatible With TTL, MOS, and CMOS
  • Pin-Compatible With LM393

LinCMOS is a trademark of Texas Instruments Incorporated.
All other trademarks are the property of their respective owners.

  • Single or Dual-Supply Operation
  • Wide Range of Supply Voltages 2 V to 18 V
  • Low Supply Current Drain 150 µA Typ at 5 V
  • Fast Response Time . . . 200 ns Typ for TTL-Level Input Step
  • Built-in ESD Protection
  • High Input Impedance . . . 1012 Ω Typ
  • Extremely Low Input Bias Current 5 pA Typ
  • Ultrastable Low Input Offset Voltage
  • Input Offset Voltage Change at Worst-Case Input Conditions Typically 0.23 µV/Month, Including the First 30 Days
  • Common-Mode Input Voltage Range Includes Ground
  • Output Compatible With TTL, MOS, and CMOS
  • Pin-Compatible With LM393

LinCMOS is a trademark of Texas Instruments Incorporated.
All other trademarks are the property of their respective owners.

This device is fabricated using LinCMOS™ technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 2 V to 18 V. Each device features extremely high input impedance (typically greater than 1012Ω), allowing direct interfacing with high-impedance sources. The outputs are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships.

The TLC372 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 1000-V ESD rating using human body model testing. However, care should be exercised in handling this device as exposure to ESD may result in a degradation of the device parametric performance.

The TLC372C is characterized for operation from 0°C to 70°C. The TLC372I is characterized for operation from –40°C to 85°C. The TLC372M is characterized for operation over the full military temperature range of –55°C to 125°C. The TLC372Q is characterized for operation from –40°C to 125°C.

This device is fabricated using LinCMOS™ technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 2 V to 18 V. Each device features extremely high input impedance (typically greater than 1012Ω), allowing direct interfacing with high-impedance sources. The outputs are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships.

The TLC372 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 1000-V ESD rating using human body model testing. However, care should be exercised in handling this device as exposure to ESD may result in a degradation of the device parametric performance.

The TLC372C is characterized for operation from 0°C to 70°C. The TLC372I is characterized for operation from –40°C to 85°C. The TLC372M is characterized for operation over the full military temperature range of –55°C to 125°C. The TLC372Q is characterized for operation from –40°C to 125°C.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
2 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TLC372 LinCMOS(TM) Dual Differential Comparators データシート (Rev. E) 2008年 7月 18日
e-Book(PDF) The Signal - オペアンプ設計ブログ集 英語版 2018年 3月 23日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・モデル

TLC372 PSpice Model

SLCJ027.ZIP (0 KB) - PSpice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
シミュレーション・ツール

TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム

TINA-TI は、DC 解析、過渡解析、周波数ドメイン解析など、SPICE の標準的な機能すべてを搭載しています。TINA には多彩な後処理機能があり、結果を必要なフォーマットにすることができます。仮想計測機能を使用すると、入力波形を選択し、回路ノードの電圧や波形を仮想的に測定することができます。TINA の回路キャプチャ機能は非常に直観的であり、「クイックスタート」を実現できます。

TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)

TINA は DesignSoft (...)

ユーザー ガイド: PDF
英語版 (Rev.A): PDF
リファレンス・デザイン

TIDA-00366 — 電流 / 電圧 / 温度保護機能搭載、強化絶縁型 3 相インバータのリファレンス・デザイン

このリファレンス・デザインは、強化絶縁型ゲート・ドライバ UCC21530、強化絶縁型アンプの AMC1301 と AMC1311、および TMS320F28027 マイコンを使用して設計された、最大 10kW の定格である 3 相インバータを実現します。MCU の内部 ADC と接続した AMC1301 を使用してモータ電流を測定し、ブートストラップ電源を使用して IGBT ゲート・ドライバを駆動することで、システム・コストを低減しています。このインバータは、過負荷、短絡、グランド・フォルト、DC バス低電圧および過電圧、IGBT モジュール過熱に対する保護を備えています。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00201 — 差動シグナル・コンディショニング回路、電流および電圧測定用、Fluxgate センサ使用

This design provides a 4-channel signal conditioning solution for differential ADCs integrated into a microcontroller measuring motor current using fluxgate sensors. Also provided is an alternative measurement circuit with external differential SAR ADCs as well as circuits for high-speed (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00208 — シングル・エンド・シグナル・コンディショニング回路、電流および電圧測定用、Fluxgate センサ使用

This design provides a 4-channel signal conditioning solution for single-ended SAR ADCs integrated into a microcontroller measuring motor current using fluxgate sensors. Also provided is an alternative measurement circuit with external SAR ADCs as well as circuits for high-speed overcurrent and (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-01540 — デッド・タイム挿入機能搭載ゲート・ドライバを使用する 3 相インバータのリファレンス・デザイン

The TIDA-01540 reference design reduces system cost and enables a compact design for a reinforced isolated 10kW three phase inverter. A lower system cost and compact form factor is achieved by using a dual gate driver in a single package and bootstrap configuration to generate floating voltages (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-01541 — 3 相インバータ向け高帯域幅位相電流 / DC-Link 電圧センシングのリファレンス・デザイン

TIDA-01541 リファレンス・デザインは、3 相インバータの絶縁型相電流と DC リンク電圧の測定向けに、システム・コストの低減と設計の小型化を可能にするとともに、高帯域と高精度センシングを実現します。差動からシングルエンドへの変換回路を使用し、絶縁型アンプの出力をマイコン内部の ADC にインターフェイスします。絶縁型アンプの採用により、マイコン内部の SAR(逐次比較型)ADC の使用が可能になることから、電流センシングで何らかの犠牲を伴わずにシステム・コストを低減できます。8 ピン・パッケージは、基板のフォーム・ファクタを縮小します。絶縁型アンプの高帯域によって (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00442 — 220Vac 電源リファレンス・デザインから給電されるインバータ用のシャント・ベース接地故障保護

このリファレンス・デザインは、インバータ・ベースのドライブで地絡を検出します。複数のシャント抵抗を使用し、DC 正電圧パスと DC 負電圧パスの両方でインバータ電流を測定します。DC 正電圧バスを流れる電流は、ローサイドのスイッチング降圧コンバータからの電力供給で動作する INA170 を使用して測定します。DC 負電圧バスを流れる電流は、高精度オペアンプを使用して測定します。2 つの測定電流の間の差を、高速コンパレータを使用して固定的なしきい値と比較し、地絡状態になっているかどうかを判定します。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00439 — 100/110 Vac 電源から給電されるインバータ用のシャント・ベース地絡保護、リファレンス・デザイン

このリファレンス・デザインは、インバータ・ベースのドライブで地絡を検出することを意図しています。複数のシャント抵抗を使用し、DC 正電圧バスと DC 負電圧バスの両方でインバータ電流を測定します。INA149 電流センス・アンプは、+275V の同相電圧範囲に対処できます。このアンプを使用して、DC 正電圧バスに流れる電流を測定します。DC 負電圧バスに流れる電流をセンスするために、高精度オペアンプを使用しています。2 つの測定電流の間の差を、高速コンパレータを使用して固定的なしきい値と比較し、地絡状態になっているかどうかを判定します。
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
PDIP (P) 8 オプションの表示
SOIC (D) 8 オプションの表示
SOP (PS) 8 オプションの表示
TSSOP (PW) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ