TLV320AIC3107

アクティブ

低消費電力ステレオ・コーデック、統合モノラル Class-D アンプ付

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
NEW TAC5112 プレビュー ダイナミック レンジが 100dB の ADC とダイナミック レンジ が106dB の DAC 搭載、低消費電力、ステレオ オーディオ コーデック Improved SNR
NEW TAC5142 プレビュー Hardware-control stereo audio codec with 100-dB dynamic range ADC, 106-dB dynamic range DAC Improved SNR

製品詳細

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R, TDM Analog inputs 7 Analog outputs 6 Sampling rate (max) (kHz) 96 Rating Catalog Features Headset detect, Matrix mixing, Mono Class-D amplifier, Mono headphone amplifier, Phase-locked loop (PLL) ADC SNR (typ) (dB) 92 DAC SNR (typ) (dB) 97 Operating temperature range (°C) -40 to 85
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R, TDM Analog inputs 7 Analog outputs 6 Sampling rate (max) (kHz) 96 Rating Catalog Features Headset detect, Matrix mixing, Mono Class-D amplifier, Mono headphone amplifier, Phase-locked loop (PLL) ADC SNR (typ) (dB) 92 DAC SNR (typ) (dB) 97 Operating temperature range (°C) -40 to 85
DSBGA (YZF) 42 12.1875 mm² 3.75 x 3.25 WQFN (RSB) 40 25 mm² 5 x 5
  • Stereo CODEC With Integrated Mono Class-D Amplifier
  • High Performance Audio DAC
    • 97-dBA Signal-to-Noise Ratio (Single Ended)
    • 16/20/24/32-Bit Data
    • Supports Sample Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-Emphasis Effects
    • Flexible Power Saving Modes and Performance
      are Available
  • High Performance Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
    • Digital Signal Processing and Noise Filtering Available
      During Record
  • Seven Audio Input Pins
    • Programmable as 6 Single-Ended or 3 Fully Differential
      Inputs
    • Capability for Floating Input Configurations
  • Multiple Audio Output Drivers
    • Mono Fully Differential or Stereo Single-Ended
      Headphone Drivers
    • Single-Ended Stereo Line Outputs
  • Mono 1 W Class-D BTL 8Ω Speaker Driver
  • Low Power Consumption: 15-mW Stereo 48-kHz Playback
    With 3.3-V Analog Supply
  • Ultra-Low Power Mode with Passive Analog Bypass
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Record
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S,
    Left/Right-Justified, DSP, and TDM Modes
  • Extensive Modular Power Control
  • Power Supplies:
    • Speaker Amp: 2.7 V – 5.5 V
    • Analog: 2.7 V – 3.6 V.
    • Digital Core: 1.525 V – 1.95 V
    • Digital I/O: 1.1 V – 3.6 V
  • Packages: 5-mm × 5-mm 40-QFN, 0.4-mm Pitch
    3.563-mm × 3.376-mm 42-DSBGA, 0.5 mm Pitch
    (Product Preview)
  • Stereo CODEC With Integrated Mono Class-D Amplifier
  • High Performance Audio DAC
    • 97-dBA Signal-to-Noise Ratio (Single Ended)
    • 16/20/24/32-Bit Data
    • Supports Sample Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-Emphasis Effects
    • Flexible Power Saving Modes and Performance
      are Available
  • High Performance Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
    • Digital Signal Processing and Noise Filtering Available
      During Record
  • Seven Audio Input Pins
    • Programmable as 6 Single-Ended or 3 Fully Differential
      Inputs
    • Capability for Floating Input Configurations
  • Multiple Audio Output Drivers
    • Mono Fully Differential or Stereo Single-Ended
      Headphone Drivers
    • Single-Ended Stereo Line Outputs
  • Mono 1 W Class-D BTL 8Ω Speaker Driver
  • Low Power Consumption: 15-mW Stereo 48-kHz Playback
    With 3.3-V Analog Supply
  • Ultra-Low Power Mode with Passive Analog Bypass
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Record
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S,
    Left/Right-Justified, DSP, and TDM Modes
  • Extensive Modular Power Control
  • Power Supplies:
    • Speaker Amp: 2.7 V – 5.5 V
    • Analog: 2.7 V – 3.6 V.
    • Digital Core: 1.525 V – 1.95 V
    • Digital I/O: 1.1 V – 3.6 V
  • Packages: 5-mm × 5-mm 40-QFN, 0.4-mm Pitch
    3.563-mm × 3.376-mm 42-DSBGA, 0.5 mm Pitch
    (Product Preview)

The TLV320AIC3107 is a low power stereo audio codec with stereo headphone amplifier, and mono class-D speaker driver, as well as multiple inputs and outputs programmable in single-ended or fully differential configurations.

Extensive register-based power control is included, enabling stereo 48-kHz DAC playback as low as 15 mW from a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.

The high-power output drivers are capable of driving a variety of load configurations, including up to three channels of single-ended 16-Ω headphones using ac-coupling capacitors, or stereo 16-Ω headphones in a capacitorless output configuration. The mono class-D output is capable of differentially driving an 8-Ω speaker.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers or AGC that can provide up to 59.5 dB analog gain for low-level microphone inputs. The TLV320AIC3107 provides an extremely high range of programmability for both attack (8-1,408 ms) and for decay (0.05-22.4 seconds). This extended AGC range allows the AGC to be tuned for many types of applications.

For battery saving applications where neither analog nor digital signal processing are required, the device can be put in a special analog signal passthru mode. This mode significantly reduces power consumption, as most of the device is powered down during this pass through operation.

The serial control bus supports I2C protocol, while the serial audio data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC3107 operates from an analog supply of 2.7 V–3.6 V, a digital core supply of 1.65 V–1.95 V, a digital I/O supply of 1.1 V–3.6 V, and a speaker amplifier supply of 2.7V–5.5V. The device is available in the 5 × 5-mm, 40-pin QFN package and in the future a 3.5 × 3-mm, 42-lead DSBGA package.

The record path of the TLV320AIC3107 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. Programmable filters are available during record which can remove audible noise that can occur during optical zooming in digital cameras. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC3107 contains three high-power output drivers as well as two single-ended line output drivers, and a differential class-D output driver.

The TLV320AIC3107 is a low power stereo audio codec with stereo headphone amplifier, and mono class-D speaker driver, as well as multiple inputs and outputs programmable in single-ended or fully differential configurations.

Extensive register-based power control is included, enabling stereo 48-kHz DAC playback as low as 15 mW from a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.

The high-power output drivers are capable of driving a variety of load configurations, including up to three channels of single-ended 16-Ω headphones using ac-coupling capacitors, or stereo 16-Ω headphones in a capacitorless output configuration. The mono class-D output is capable of differentially driving an 8-Ω speaker.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers or AGC that can provide up to 59.5 dB analog gain for low-level microphone inputs. The TLV320AIC3107 provides an extremely high range of programmability for both attack (8-1,408 ms) and for decay (0.05-22.4 seconds). This extended AGC range allows the AGC to be tuned for many types of applications.

For battery saving applications where neither analog nor digital signal processing are required, the device can be put in a special analog signal passthru mode. This mode significantly reduces power consumption, as most of the device is powered down during this pass through operation.

The serial control bus supports I2C protocol, while the serial audio data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC3107 operates from an analog supply of 2.7 V–3.6 V, a digital core supply of 1.65 V–1.95 V, a digital I/O supply of 1.1 V–3.6 V, and a speaker amplifier supply of 2.7V–5.5V. The device is available in the 5 × 5-mm, 40-pin QFN package and in the future a 3.5 × 3-mm, 42-lead DSBGA package.

The record path of the TLV320AIC3107 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. Programmable filters are available during record which can remove audible noise that can occur during optical zooming in digital cameras. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC3107 contains three high-power output drivers as well as two single-ended line output drivers, and a differential class-D output driver.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
12 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TLV320AIC3107 Low-Power Stereo Codec With Integrated Mono Class-D Speaker Amplifier データシート (Rev. D) PDF | HTML 2014年 12月 30日
ユーザー・ガイド Quick-Start Guide for TLV320AIC310xEVM Control (Rev. A) PDF | HTML 2022年 3月 15日
アプリケーション・ノート Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 2019年 12月 31日
アプリケーション・ノート Audio Serial Interface Configurations for Audio Codecs (Rev. A) 2019年 6月 27日
アプリケーション・ノート Common Noise Issues in Audio Codecs 2017年 7月 21日
アプリケーション・ノート Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 2013年 10月 28日
アプリケーション・ノート Dual-SPI Emulating I²S on Tiva™ C Series TM4C123x MCUs (Rev. B) 2013年 6月 12日
アプリケーション・ノート Audio Serial Interface Configurations for Audio Codecs 2010年 9月 22日
アプリケーション・ノート Interfacing an I2S Device to an MSP430 Device (Rev. A) 2010年 3月 22日
アプリケーション・ノート Solving Enumeration Errors in USB Audio DAC and CODEC Designs 2009年 10月 30日
アプリケーション・ノート Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 2009年 7月 8日
EVM ユーザー ガイド (英語) TLV320AIC3107EVM-K - User Guide 2008年 11月 20日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TLV320AIC3107EVM-K — TLV320AIC3107 の評価モジュールと USB マザーボード

The TLV320AIC3107EVM-K is a combination of two boards the TLV320AIC3107EVM and a USB-MODEVM to allow operation with personal computers. The TLV320AIC3107EVM is an EVM manufactured in Texas Instruments modular EVM form factor. This evaluation module (EVM) is a complete stereo audio codec with (...)

ユーザー ガイド: PDF
ドライバまたはライブラリ

TLV320AIC31XX-DRIVERS — TLV320AIC31xx CODEC ファミリ Linux ドライバ・サポート

これらの Linux ドライバは、TLV320AIC31xx デバイス・ファミリが搭載している TI の低消費電力オーディオ・コーデックをサポートし、.c と .h 両方のファイルが付属しています。以下の「Go to third party」 (サード・パーティーにアクセス) ボタンを使用すると、git.kernal.org から適切なドライバをダウンロードできます。

Linux のメインライン・ステータス
Linux メインラインで利用可能か:はい
git.ti.com から入手可能か:N/A

Linux デバイス・ツリー・ドキュメント

計算ツール

COEFFICIENT-CALC Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
オーディオ・コーデック
TLV320AIC26 HP (ヘッドホン) / スピーカ・アンプと 12 ビット測定 ADC 搭載、低消費電力、モノラル ADC とステレオ DAC TLV320AIC28 6 個のオーディオ入力と HP (ヘッドホン) / スピーカ・アンプ搭載、低消費電力、モノラル ADC とステレオ DAC TLV320AIC29 6 個のオーディオ入力と HP (ヘッドホン) / スピーカ・アンプ搭載、低消費電力、モノラル ADC とステレオ DAC TLV320AIC3007 低消費電力ステレオ・コーデック、統合 Class-D アンプ付 TLV320AIC31 6 入力、6 出力、ヘッドホン / スピーカ・アンプと 3D エフェクト内蔵、低消費電力、ステレオ・コーデック TLV320AIC3100 低消費電力オーディオ・コーデック、オーディオ・プロセッシングおよびモノラル Class-D アンプ内蔵 TLV320AIC3101 低消費電力ステレオ・コーデック、6 入力、6 出力、スピーカ/ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト TLV320AIC3104 低消費電力ステレオ・コーデック、6 入力、6 出力、ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト TLV320AIC3105 低消費電力ステレオ・コーデック、6 入力、6 出力、ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト TLV320AIC3106 10 入力、7 出力、ヘッドホン・アンプ、エンハンスド・デジタル・エフェクト機能搭載、低消費電力ステレオ・コーデック TLV320AIC3107 低消費電力ステレオ・コーデック、統合モノラル Class-D アンプ付 TLV320AIC3110 低消費電力オーディオ・コーデック、1.3W ステレオ、Class-D スピーカ・アンプ付 TLV320AIC3111 低消費電力オーディオ・コーデック、組込み miniDSP/ステレオ Class-D スピーカ・アンプ内蔵 TLV320AIC3120 低消費電力オーディオ・コーデック、miniDSP / 2.5W モノラル Class-D スピーカ・アンプ搭載 TLV320AIC32 6 入力、6 出力、HP (ヘッドホン) / スピーカ・アンプと 3D エフェクト搭載、低消費電力、ステレオ・コーデック TLV320AIC3204 PowerTune™ テクノロジー採用、超低消費電力、ステレオ オーディオ コーデック TLV320AIC3206 DirectPath™ HP (ヘッドホン) アンプ搭載、超低消費電力、ステレオ コーデック TLV320AIC3254 超低消費電力ステレオ・オーディオ・コーデック、プログラマブル miniDSP 付き TLV320AIC3256 miniDSP と DirectPath™ HP (ヘッドホン) アンプ搭載、超低消費電力、ステレオ コーデック TLV320AIC33 低消費電力 ステレオ CODEC、10 入力、7 出力、ヘッドフォン/スピーカ・アンプ、およびエンハンスド・デジタル・エフェクト TLV320AIC34 低消費電力、4 チャネル・コーデック TSC2100 ステレオ DAC / モノラル ADC と HP (ヘッドホン) / スピーカ・アンプ搭載、4 線式タッチ・スクリーン・コントローラ TSC2101 ステレオ DAC / モノラル ADC と HP (ヘッドホン) / スピーカ・アンプ搭載、4 線式タッチ・スクリーン・コントローラ TSC2102 ステレオ DAC と HP (ヘッドホン) アンプ搭載、4 線式タッチ・スクリーン・コントローラ TSC2117 4 線式タッチスクリーン・コントローラ、低消費電力モノラル ADC/ステレオ DAC TSC2301 ステレオ・コーデックとヘッドホン・アンプ搭載、4 線式タッチ・スクリーン・コントローラ (キーパッド対応機能内蔵、6 GPIO 搭載)
オーディオ ADC
TLV320ADC3001 92dB SNR、低消費電力ステレオ ADC(ADC3001) TLV320ADC3101 デジタル・マイク・サポートと miniDSP を搭載した 92dB SNR 低消費電力ステレオ ADC
スピーカ・アンプ
TAS2505 オーディオ処理およびモノ・ヘッドフォン・アンプ付き、2W、モノラル、デジタル / アナログ入力 Class-D オーディオ・アンプ TAS2505-Q1 車載対応、オーディオ処理機能搭載、2W、モノラル、デジタルまたはアナログ入力 Class-D アンプ TAS2521 miniDSP、18-mW、モノラル・ヘッドホン・ドライバ搭載、2W、モノラル、デジタル / アナログ入力 Class-D オーディオ・アンプ
計算ツール

SLAR163 Audio CODEC/ADC PLL Calculator

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
オーディオ・コーデック
TLV320AIC3007 低消費電力ステレオ・コーデック、統合 Class-D アンプ付 TLV320AIC3100 低消費電力オーディオ・コーデック、オーディオ・プロセッシングおよびモノラル Class-D アンプ内蔵 TLV320AIC3101 低消費電力ステレオ・コーデック、6 入力、6 出力、スピーカ/ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト TLV320AIC3104 低消費電力ステレオ・コーデック、6 入力、6 出力、ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト TLV320AIC3104-Q1 オートモーティブ低消費電力ステレオ・オーディオ・コーディック、6 音声入力ピンおよび 6 音声出力ドライバ付き TLV320AIC3105 低消費電力ステレオ・コーデック、6 入力、6 出力、ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト TLV320AIC3106 10 入力、7 出力、ヘッドホン・アンプ、エンハンスド・デジタル・エフェクト機能搭載、低消費電力ステレオ・コーデック TLV320AIC3106-Q1 車載対応、ヘッドホン・アンプとエンハンスド・デジタル・エフェクト機能搭載。低消費電力ステレオ・コーデック TLV320AIC3107 低消費電力ステレオ・コーデック、統合モノラル Class-D アンプ付 TLV320AIC3109-Q1 車載、低消費電力、96kHz、モノラル・オーディオ・コーデック TLV320AIC3110 低消費電力オーディオ・コーデック、1.3W ステレオ、Class-D スピーカ・アンプ付 TLV320AIC3111 低消費電力オーディオ・コーデック、組込み miniDSP/ステレオ Class-D スピーカ・アンプ内蔵 TLV320AIC3120 低消費電力オーディオ・コーデック、miniDSP / 2.5W モノラル Class-D スピーカ・アンプ搭載 TLV320AIC3204 PowerTune™ テクノロジー採用、超低消費電力、ステレオ オーディオ コーデック TLV320AIC3206 DirectPath™ HP (ヘッドホン) アンプ搭載、超低消費電力、ステレオ コーデック TLV320AIC3253 超低消費電力ステレオ・オーディオ・コーデック、miniDSP およびステレオ・デジタル・マイク入力付き TLV320AIC3254 超低消費電力ステレオ・オーディオ・コーデック、プログラマブル miniDSP 付き TLV320AIC3254-Q1 車載対応、miniDSP と PowerTune™ テクノロジー採用、超低消費電力ステレオ オーディオ コーデック TLV320AIC3256 miniDSP と DirectPath™ HP (ヘッドホン) アンプ搭載、超低消費電力、ステレオ コーデック TLV320AIC34 低消費電力、4 チャネル・コーデック
オーディオ ADC
TLV320ADC3001 92dB SNR、低消費電力ステレオ ADC(ADC3001) TLV320ADC3100 低消費電力ステレオ A/D コンバータ(ADC)、音声操作システムとポータブル・オーディオ向け TLV320ADC3101 デジタル・マイク・サポートと miniDSP を搭載した 92dB SNR 低消費電力ステレオ ADC
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
DSBGA (YZF) 42 オプションの表示
WQFN (RSB) 40 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ