TPA2080D1

アクティブ

統合型 Class-G 昇圧機能、20dB 固定ゲイン機能搭載、2.2W、モノラル、アナログ入力 Class-D オーディオ・アンプ

製品詳細

Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 6.4 Power stage supply (min) (V) 2.5 Load (min) (Ω) 4 Output power (W) 2.2 SNR (dB) 95 THD + N at 1 kHz (%) 0.07 Iq (typ) (mA) 2 Control interface GPIO Closed/open loop Open Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.2 PSRR (dB) 62.5 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 6.4 Power stage supply (min) (V) 2.5 Load (min) (Ω) 4 Output power (W) 2.2 SNR (dB) 95 THD + N at 1 kHz (%) 0.07 Iq (typ) (mA) 2 Control interface GPIO Closed/open loop Open Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.2 PSRR (dB) 62.5 Operating temperature range (°C) -40 to 85
DSBGA (YZG) 12 3.9375 mm² 2.25 x 1.75
  • 2.2 W into 4-Ω Load from 3.6-V Supply
    (1% THD+N)
  • Integrated Class-G Boost Converter
    • Increases Efficiency at Low Output Power
  • Low Quiescent Current of 3.5 mA from 3.6 V
  • Thermal and Short-Circuit Protection With Auto
    Recovery
  • 20-dB Fixed Gain
  • Available in 1.53-mm × 1.98-mm, 0.5-mm pitch
    12-ball WCSP (DSBGA) Package
  • 2.2 W into 4-Ω Load from 3.6-V Supply
    (1% THD+N)
  • Integrated Class-G Boost Converter
    • Increases Efficiency at Low Output Power
  • Low Quiescent Current of 3.5 mA from 3.6 V
  • Thermal and Short-Circuit Protection With Auto
    Recovery
  • 20-dB Fixed Gain
  • Available in 1.53-mm × 1.98-mm, 0.5-mm pitch
    12-ball WCSP (DSBGA) Package

The TPA2080D1 device is a high-efficiency Class-D audio power amplifier with an integrated Class-G boost converter that enhances efficiency at low output power. It drives up to 2.2 W into an 4-Ω speaker (1% THD+N). With 85% typical efficiency, the TPA2080D1 helps extend battery life when playing audio.

The built-in boost converter generates a 5.75-V supply voltage for the Class-D amplifier when high output power is required. This provides a louder audio output than a stand-alone amplifier directly connected to the battery. During low audio output power periods, the boost converter deactivates and connects VBAT directly to the Class-D amplifier supply, PVDD. This improves overall efficiency.

The TPA2080D1 has an integrated low-pass filter to improve the RF rejection and reduce DAC out-of-band noise, increasing the signal-to-noise ratio (SNR).

The TPA2080D1 is available in a space-saving 1.53-mm × 1.982-mm, 0.5-mm pitch WCSP package (YZG).

The TPA2080D1 device is a high-efficiency Class-D audio power amplifier with an integrated Class-G boost converter that enhances efficiency at low output power. It drives up to 2.2 W into an 4-Ω speaker (1% THD+N). With 85% typical efficiency, the TPA2080D1 helps extend battery life when playing audio.

The built-in boost converter generates a 5.75-V supply voltage for the Class-D amplifier when high output power is required. This provides a louder audio output than a stand-alone amplifier directly connected to the battery. During low audio output power periods, the boost converter deactivates and connects VBAT directly to the Class-D amplifier supply, PVDD. This improves overall efficiency.

The TPA2080D1 has an integrated low-pass filter to improve the RF rejection and reduce DAC out-of-band noise, increasing the signal-to-noise ratio (SNR).

The TPA2080D1 is available in a space-saving 1.53-mm × 1.982-mm, 0.5-mm pitch WCSP package (YZG).

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
6 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPA2080D1 2.2-W Constant Output Power Class-D Audio Amplifier With Class-G Boost Converter データシート (Rev. B) PDF | HTML 2016年 4月 27日
アプリケーション・ノート Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 2019年 8月 26日
アプリケーション・ノート AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 2019年 6月 27日
アプリケーション・ノート AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 2013年 5月 1日
ユーザー・ガイド TPA2080D1 Audio Power Amplifier Evaluation Module 2012年 2月 17日
アプリケーション・ノート Filter-Free Class-D Audio Amplifiers 2009年 11月 9日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・モデル

TPA2080D1 TINA-TI Reference Design

SLOM271.TSC (687 KB) - TINA-TI Reference Design
シミュレーション・モデル

TPA2080D1 TINA-TI Spice Model

SLOM270.ZIP (14 KB) - TINA-TI Spice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
DSBGA (YZG) 12 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ