ホーム インターフェイス USB IC USB Type-C と USB パワー・デリバリ (電力供給) IC

TPS25740A USB Type-C™ Rev 1.2 / USB PD 2.0 ソース・コントローラ(5V/9V/15V)

製品詳細

Function Type-C Type PD controller Power role Source Alternate mode No External power-path control NFET Data role DFP Rating Catalog Dead battery support No Operating temperature range (°C) -40 to 125
Function Type-C Type PD controller Power role Source Alternate mode No External power-path control NFET Data role DFP Rating Catalog Dead battery support No Operating temperature range (°C) -40 to 125
VQFN (RGE) 24 16 mm² 4 x 4
  • USB Power Delivery (PD) 2.0 Certified Provider,
    USB Type-C™ Rev. 1.2 Compliant Source
  • Pin-Selectable Voltage Advertisement
    • 5 V, 12 V, and/or 20 V (TPS25740)
    • 5 V, 9 V, and/or 15 V (TPS25740A)
  • Pin-Selectable Peak Power Settings
    • 12 options 15 W – 100W (TPS25740)
    • 11 options 15 W – 81W (TPS25740A)
  • High Voltage and Safety Integration
    • Overvoltage, Overcurrent, Overtemperature Protection and VBUS Discharge
    • IEC 61000-4-2 Protection on CC1 and CC2
    • Input Pin for Fast Shutdown Under Fault
    • Control of External N-ch MOSFET
    • 2-pin External Power Supply Control
    • Wide VIN Supply (4.65 V – 25 V)
  • Below 10 µA Quiescent Current when Unattached
  • Port Attachment Indicator
  • Port Power Management
  • Built-In 1.8 V at 35 mA Supply Output
  • USB Power Delivery (PD) 2.0 Certified Provider,
    USB Type-C™ Rev. 1.2 Compliant Source
  • Pin-Selectable Voltage Advertisement
    • 5 V, 12 V, and/or 20 V (TPS25740)
    • 5 V, 9 V, and/or 15 V (TPS25740A)
  • Pin-Selectable Peak Power Settings
    • 12 options 15 W – 100W (TPS25740)
    • 11 options 15 W – 81W (TPS25740A)
  • High Voltage and Safety Integration
    • Overvoltage, Overcurrent, Overtemperature Protection and VBUS Discharge
    • IEC 61000-4-2 Protection on CC1 and CC2
    • Input Pin for Fast Shutdown Under Fault
    • Control of External N-ch MOSFET
    • 2-pin External Power Supply Control
    • Wide VIN Supply (4.65 V – 25 V)
  • Below 10 µA Quiescent Current when Unattached
  • Port Attachment Indicator
  • Port Power Management
  • Built-In 1.8 V at 35 mA Supply Output

The TPS25740, TPS25740A implements a source that is compliant to USB Power Delivery 2.0 version 1.2 and Type-C revision 1.2. It monitors the CC pin to detect when a USB Type-C sink is attached, then it enables a N-ch MOSFET gate driver to turn on VBUS. The device then offers up to three different voltages using USB Power Delivery. Four input pins (PSEL, HIPWR, PCTRL, and (EN12V or EN9V) are used to configure the voltages and currents advertised. The device uses the CTL1 and CTL2 pins to select one of three voltages from the power supply based on the voltage requested by the attached sink. The device automatically handles discharging the VBUS output per USB PD requirements.

The TPS25740, TPS25740A typically draws 8.5 µA (or 5.8 µA if VDD = 3.3 V) when no device is attached. Additional system power saving is achievable by using the Port Attachment Indicator (UFP) output to disable the power source when no device is attached.

Protection features include overvoltage protection, overcurrent protection, over-temperature protection, IEC for CC pins, and system override to disable the gate driver (GD).

The TPS25740, TPS25740A implements a source that is compliant to USB Power Delivery 2.0 version 1.2 and Type-C revision 1.2. It monitors the CC pin to detect when a USB Type-C sink is attached, then it enables a N-ch MOSFET gate driver to turn on VBUS. The device then offers up to three different voltages using USB Power Delivery. Four input pins (PSEL, HIPWR, PCTRL, and (EN12V or EN9V) are used to configure the voltages and currents advertised. The device uses the CTL1 and CTL2 pins to select one of three voltages from the power supply based on the voltage requested by the attached sink. The device automatically handles discharging the VBUS output per USB PD requirements.

The TPS25740, TPS25740A typically draws 8.5 µA (or 5.8 µA if VDD = 3.3 V) when no device is attached. Additional system power saving is achievable by using the Port Attachment Indicator (UFP) output to disable the power source when no device is attached.

Protection features include overvoltage protection, overcurrent protection, over-temperature protection, IEC for CC pins, and system override to disable the gate driver (GD).

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
8 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS25740, TPS25740A USB Type-C and USB PD Source Controller データシート (Rev. B) PDF | HTML 2017年 6月 13日
ホワイト・ペーパー A Primer on USB Type-C and Power Delivery Applications and Requirements (Rev. B) PDF | HTML 2022年 3月 25日
ホワイト・ペーパー 移動中もUSB Power Deliveryを実現する昇降圧型コンバータ 英語版 2017年 5月 17日
技術記事 Upgrading USB chargers from Type-A to Type-C PDF | HTML 2017年 1月 17日
ホワイト・ペーパー Circuit protection for your next USB Type-C design white paper 2016年 10月 12日
技術記事 USB Type-C version 1.2 – USB embraces a broader market PDF | HTML 2016年 8月 4日
技術記事 Why move from USB Power Delivery 2.0 to 3.0? PDF | HTML 2016年 7月 14日
技術記事 Power Tips: Power sharing in USB Type-C applications PDF | HTML 2016年 6月 8日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

計算ツール

SLVC659 TPS25740/TPS25740A Design Calculator Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
USB Type-C と USB パワー・デリバリ (電力供給) IC
TPS25740 TPS25740 USB Type-C™ Rev 1.2 / USB PD 2.0 ソース・コントローラ(5V/12V/20V) TPS25740A TPS25740A USB Type-C™ Rev 1.2 / USB PD 2.0 ソース・コントローラ(5V/9V/15V)
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
シミュレーション・ツール

TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム

TINA-TI は、DC 解析、過渡解析、周波数ドメイン解析など、SPICE の標準的な機能すべてを搭載しています。TINA には多彩な後処理機能があり、結果を必要なフォーマットにすることができます。仮想計測機能を使用すると、入力波形を選択し、回路ノードの電圧や波形を仮想的に測定することができます。TINA の回路キャプチャ機能は非常に直観的であり、「クイックスタート」を実現できます。

TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)

TINA は DesignSoft (...)

ユーザー ガイド: PDF
英語版 (Rev.A): PDF
リファレンス・デザイン

PMP20533 — ユニバーサル AC 入力、15V/3A/45W 出力、USB Type-C™™ DFP (ダウンストリーム側ポート) のリファレンス デザイン

PMP20533 電源リファレンス デザインは、チャージャ アプリケーション向けに、85 ~ 265VAC のユニバーサル AC 入力範囲で動作し、USB Type-C® 経由で最大 15V/45W を供給します。同期整流器ドライバである UCC24636 を採用しており、91% の平均効率を達成します。  TPS25740A は、フライバック電源と Type-C® ケーブルの間のインターフェイスとして機能します。PMP20533 は、電源ブリックとして、USB-IF から認証取得済みです (Product Test ID: 1020017)。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP20807 — コンパクトな 27W USB Type-C パワー・デリバリのリファレンス・デザイン

The PMP20807 reference design is a USB Type C power delivery solution configurable for 5V or 9V output. This compact reference design has a total solution size of 44mm x 18mm x 7.8mm. The low quiescent current capability of LMS3635A and TPS25740A  minimizes the amount of necessary input (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP20172 — ポート電源管理 DC/DC チャージャを使用する 36W USB デュアル・ポート USB Type-C™ PD のリファレンス・デザイン

PMP20172 リファレンス・デザインは、2 つの USB Type-C 出力を使用して、最大 36W の電力を供給します。入力として、17VDC バスを使用します。これら 2 つの出力は、ポートのパワー・マネージメント機能を実装しています。どちらか 1 つのポートのみを使用している場合、そのポートに 36W 全体が割り当てられ、両方のポートを使用している場合、電力は各ポートに対する 18W に分割されます。出力電圧として、5V、9V、または 15V がサポートされています。PMP20172 は、電源ブリックとして、USB-IF(Product Test ID: (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VQFN (RGE) 24 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ